I am thinking about buying a X6100. I have looked a some of the WSJT-X setup videos for it and I am concerned that they all show Split Operation set to None instead of Rig or Fakeit. Does the X6100 wo

Occaisionally I get unsolicited decodes like this: 212600 -12 -0.9 2578 ~ KN6OKN 5S1UJW/R R DH63 a2 Can anyone tell me who/what this is? 73. Marty KN60KN

Before I ask this question, let me say that I don't want to hear about any other "better" way to do this. I am using this method because it has worked best for me and I am not interested in JTAlert or

Icom 7300 I have been trying to get a QSO and I use TX-6 I am putting out power as my meter shows about 10W, I have read the manual numerous times and I cannot find my problem

Has anyone tried 599zx V5 upgrade on the 599zx on FT8? It works with PSK and RTTY using the Computer sound card. Has anyone delved into FT-8? - Bill W2CQ

I use an Icom 7300 radio purchased new in 2022. When I go to transmit to a station, I get these error messages: "Error in sound input, an error in opening the audio input device has occurred. Rig cont

Have had several decodes like this? Is this a bad decode or what? -- Dave, K7PDW Keep On Ham'n

This may not even be a problem, perhaps this is just the way it's supposed to operate.. I don't really know. When I'm operating in SSB mode, (hunting POTA or just rag chewing) I enter the contacts cal

Hi Steve, Sorry to hear about your crash... Not to press the point about backups, but for the future you might consider Clonezilla. It takes a snapshot image of the disk, and brings it back as is, wit

Can someone help me understand how to use the Outgoing Interfaces . I operate WSJT-X at a remote site. I access the screen of the remote PC using Anydesk. I would like the logging info for stations wo

> I'm running two instances of WSJT-X on one computer. I'm using two > different radios and two different antenna systems. Either or both > work correctly. The issue, after making a contact on either

I am extremely new to WSJT-X. I searched around but did not find my issue. Using version 2.5.0. Radio is IC756Pro2. Using the latest version RigPI. I have been using a cable that goes into the front p

Since 2.5.4 CAT control of the Yaesu FT450D (and 450) appears to be broken and still unsolved The latest 2.6.1 is not a solution, I just downloaded this. It is even throwing more HAMLIB related errors

I have a working configuration called FT450-WSPR I cloned that into a configuration called FT450D-WSPR I switched to the cloned FT450D-WSPR This still works fine without CAT issues The cloning is NOT

Not working correct is the wspr band hopping scheduler. It chooses the ALL frequency instead of the WSPR frequency when using Bandhopping. For the 40 m and the 80 meter band. 7.039 MHz and 3.569 MHz T

II am using WSJT-X v2.6.1 supporting the ARRL Volunteers on the Air 2023 contest. There are two states on each week, with different portable W1AW callsigns. When operating as W1AW/4 I just had WSJT-X

I am trying to set my ICOM 7300 for WSJT-X. Anyone one using this radio ICOM 7300. Need some help on the parameter settings. Thanks in advance -- *73'S DAVE NU4N*

Hi, I'm thinking about taking my FT8 operation on the road. Is it possible to use WSJT-X without an internet connection? Does it automatically upload contacts to LoTW when reconnected to the internet?

I recently replaced my PC with a new WIndows 11 PC. I've downloaded and configured WSJT-X 2.5.4 for the TS-2000, IC-705, and IC-7800. Everything works and I decode signals on JT65 and Q65 on 2 meters.

I am using compound call as F/E72T. I am not able to make successful contact with any other station which is using compound call too. Same thing stands for many special calls with very long callsign.