Receive signal degraded when in the Fox/Hound mode. When in the F/H mode my receive signal is significantly degraded. For example, when receiving CY0S (Sable Island DXpedition) on 17 meters in the reg

Using F/H mode in v2.6.1, win10 with a couple of stations in the past couple of days. These are the first opportunities I've had to use it since the update to v2.6.1. Anyway, both stations responded,

Not sure if this is a bug or a feature.. If Hound mode is enabled and you directly enter a frequency WSJT-X enables TX right away. This does not happen if you use the drop down to choose the frequency

Hello all! I have been using WSJTX for about a year and a half on my Lenovo IdeaPad and it works great. However I decided to build a little computer with a Raspberry Pi 4 Model B (8gb) to try to be a

Hi Edgar, Actually there is a way to accomplish this in WSJT-X. The method to do this is to slightly tune your VFO. Being you are using USB, if you slowly tune your VFO lower in frequency, you will se

I noticed many IMD reports given when the signal has data. The only way to get an accurate IMD reading is with an IDLE signal, which has only 2 tones. If you want to give an IMD report, have the stati

FT8 with 20 meter band selected, I'm receiving 40Meter signals, but no 20 meter signals. With 40 meter selected, I receive the same 40 meter signals. CAT is working. Radio is a QRP labs QDX.

I am trying to set up my second radio, FT1000MP with Signalink and WSJT-X, Windows 10 PC. It all used to work before, but hasn't been in use for some time. The PC has basically been sitting there with

I have a new issue that just started and I am stumped at the moment. I have been using WSJT-X for several years and everything has worked fine. But this just started this afternoon. When my rig transm

I was given this some time ago. Thought others may find it helpful. Just enter you call https://hamspots.net/history/ -- Rick - N8XI

*WSJTX RIG CONTROL ERROR* My configuration. Microsoft Surface pro book 2 Windows 11 pro Computer Windows 11 pro Icom-705 Patch 1.30 ICOM Remote utility 2.21 Flrig 1.4.8 Fldigi 4.1.26 Wsjt-X 2.6.1 64 b

I'm running 2.6.1 on a W10 pro machine. Ever since I upgraded to 2.6.1 I have occasionally had the standard message exchange do this: P5xxx K7FR RRR K7FR P5xxx 73 CQ K7FR CN97 It drops immediately to

There seems to be an awful lot of consernation about timekeeping. In my experience, all that's needed is built right into Windows 10 and 11, although I have set the "Windows Time" service to "automati

This all started this afternoon when I tried replacing my USB keyboard & mouse with a Logitech wireless keyboard & mouse; I've since gone back to the original USB setup. I'm using WSJT-X 2.6.1, JTAler

I have logged 15 FT8 QSO adi files on WSJT-X. I use Log4OM v2 and would like to transfer these files to Log4OM. I'm new at this game so would like some advice on the best way to proceed. I am in the p

I've gone through numerous websites and message boards trying to find answers. I continue to get an error when setting up the rig. Using the CAT and Data. This is the error(s) I am receiving: Rig Fail

Smart power meter EMI interference (suspected). I'm getting about 30db (mystery) signal on WSJT's monitor bar graph. This signal appears to be induced into the audio cable between my K3 radio and the

Just Google Dimension4. -- John P. WA2FZW

Hi, I have a Windows 11 box, that was running WSJT-X V 2.54 without any issues. After ugrading it to 2.61,same exact settings, I no longer have any CAT control. Nothing I have tried works. If I roll i

Hello, I'm running the latest version of WSJT-X. I use WSJT-X with GridTracker and I am able to click on a station in the GridTracker roster and WSJT-X automatically initiates a QSO. This works perfec