When wstj-x adds the record after the end of the call, it inserts everything into the record we except the name of the contact. Is there a setting to mak.e this happen ? I usually copy and paste from

Is anyone else seeing this problem on Mac? Since the Mac OS to 13.x update, WSJT-X locks up when it transmits in FT8. Until the update, it received and decoded normally. Now, transmitting usually caus

My WSJT-X is v2.6.0-rc5. In FT8 Hound mode, I listen to the Fox, set my TX frequency, and press "Activate TX". WSJT-X then transmits to the Fox at 00 and 30. But during the RX periodes (15/45), I can'

Hi Folks, There needs to be facilities to place limits on the number of TX4 and TX5 cycles that can be transmitted - prevening the operational "RR73 Loops" as they are often termed. Such just creates

I'm running a Win 11 PC and Elecraft K4 and updating some of my config so want to connect via a com0com virtual null modem to win4k4suite - this setup is new to me and I'm having some trouble. I've ha

The Irish Radio Transmitters Society, IRTS, have just released a prepublication draft of our upcoming HAREC Study Guide. It is aimed at those who want to pass the Irish HAREC licensing exam. I led the

I posted this to #logging and #QSO_practices because they looked the most germane. I've gotten numerous emails asking me to clarify my QTH. It appears that at some time in the past the CTY file in WSJ

Running Windows 10 and never more than 10 watts. Would like to have the option to filter weak signals from the display -- maybe all with negative dB -- because I have never been able to establish cont

Running v2.6.0-rc5 on a 64-bit Win 10 (21H2) PC, 3.0GHz i7-9700 CPU and 16G RAM. I'm participating in the FT Roundup contest that's running this weekend (3/4 Dec) so am using a configuration that uses

I installed Version 2.6.0-rc4: wsjtx-2.6.0-rc4-win64.exe. (64-bit Windows 7 or later). and it crashes from time to time and gives me the following message (Sub-process error Failed to close orphaned j

Hi folks. I'm well aware of that this may be way OT. But right now, I couldn't think of anything better. Since I'm using WSJT-X for FT8 and FT4 with automatic QSO upload. I'm quite new to these modern

I was playing around with HF with my TS2K. I usually use the radio for VHF+ but I thought I would hook it up to my OCF dipole and do some digital. I have found that I need to bring the antenna in a li

If I'm making a call in FT8 and I then select another station halfway through the call. Does the call stop and then restart halfway through the call with the new callsign? -- Thanks Steve M0ZEH

My wsjtx_syslog.log is very large. I backup weekly so I have history. Can I remove it when it starts to get large and will WSJTx automatically create a new one? -- Dave, K7PDW Keep On Ham'n

Other than CW what is the best mode to use via Aurora - My ears arn't the best for speech on Aurora and looking at a variation for 70Mhz mainly. Tried FT4/8 and heard some recommendations of Q65 but w

With the latest release, WSJT-X crashed immediately. I was advised to rename WSJT-X.ini. However, that proved difficult to find. The way to locate this file is as follows: The file is in ~/Library/Pre

Hello All… I just want to make sure I correctly understand the dB column in the Band Activity window. As I read the manual, it says that this column is the “measured signal-to-noise ratio.” I take tha

Good day Has anyone tried using DX aggregator with wsjt and aclog? I run aclog, wsjt, and grid tracker with no problem using multicast. But adding the aggregator presents a problem.

I hope this does not appear twice in this forum…I apologize in advance if it does, something quite weird happened during my original attempt at posting. I just want to make sure I correctly understand

Is there an FT-991/FT-991A owner out there willing to help me test Hamlib on their rig to find the best settings? If so please contact me off-list. Mike W9MDB