I posted this to #logging and #QSO_practices because they looked the most germane. I've gotten numerous emails asking me to clarify my QTH. It appears that at some time in the past the CTY file in WSJ

Running Windows 10 and never more than 10 watts. Would like to have the option to filter weak signals from the display -- maybe all with negative dB -- because I have never been able to establish cont

Running v2.6.0-rc5 on a 64-bit Win 10 (21H2) PC, 3.0GHz i7-9700 CPU and 16G RAM. I'm participating in the FT Roundup contest that's running this weekend (3/4 Dec) so am using a configuration that uses

I installed Version 2.6.0-rc4: wsjtx-2.6.0-rc4-win64.exe. (64-bit Windows 7 or later). and it crashes from time to time and gives me the following message (Sub-process error Failed to close orphaned j

Hi folks. I'm well aware of that this may be way OT. But right now, I couldn't think of anything better. Since I'm using WSJT-X for FT8 and FT4 with automatic QSO upload. I'm quite new to these modern

I was playing around with HF with my TS2K. I usually use the radio for VHF+ but I thought I would hook it up to my OCF dipole and do some digital. I have found that I need to bring the antenna in a li

If I'm making a call in FT8 and I then select another station halfway through the call. Does the call stop and then restart halfway through the call with the new callsign? -- Thanks Steve M0ZEH

My wsjtx_syslog.log is very large. I backup weekly so I have history. Can I remove it when it starts to get large and will WSJTx automatically create a new one? -- Dave, K7PDW Keep On Ham'n

Other than CW what is the best mode to use via Aurora - My ears arn't the best for speech on Aurora and looking at a variation for 70Mhz mainly. Tried FT4/8 and heard some recommendations of Q65 but w

With the latest release, WSJT-X crashed immediately. I was advised to rename WSJT-X.ini. However, that proved difficult to find. The way to locate this file is as follows: The file is in ~/Library/Pre

Hello All… I just want to make sure I correctly understand the dB column in the Band Activity window. As I read the manual, it says that this column is the “measured signal-to-noise ratio.” I take tha

Good day Has anyone tried using DX aggregator with wsjt and aclog? I run aclog, wsjt, and grid tracker with no problem using multicast. But adding the aggregator presents a problem.

I hope this does not appear twice in this forum…I apologize in advance if it does, something quite weird happened during my original attempt at posting. I just want to make sure I correctly understand

Is there an FT-991/FT-991A owner out there willing to help me test Hamlib on their rig to find the best settings? If so please contact me off-list. Mike W9MDB

Can anyone help with this error? We have Un-installed WSJT-X with Revo uninstaller and reinstalled several times. Radio has updated drivers and all setting are correct. It will work for a few minutes

Running v2.6.0-rc5 on a 64-bit Win 10 (21H2) PC, 3.0GHz i7-9700 CPU and 16G RAM. Issue with the frequency/mode table when using certain configurations under v2.6.0-rc5. I have multiple WSJT-X configur

2.6.0-rc5 stopped working today ( 12/1/22) I tried loading latest WSJT-x 64 bit file. The file loaded and places an icon on desktop but will not launch.It does show up in the programs and app list on

I installed the linked hamlib mentioned and stiill doesnt work, but I'm no expert. Ty K3MM

I down loaded the new release today. Running WIndows 10 on both computers. The new release worked on one computer but not my other computer. Any ideas ?? Thanks in advance for the help. -- *73'S DAVE

I just installed the new version on one computer and works and loads just fine. Tried to down load on the other computer and the new release would not run. Any ideas ?? Tnx -- *73'S DAVE NU4N*