I am having interference between my computer and my G90 on 40 meters. The touch pad locks up on transmit. Once transmit is done I can use the mouse. 20 meters has no issues. On the cat cable I a ferri

/home/RickO/Downloads/wsjtx /qt5-qtserialport-5.15.3-1.fc36.x86_64.rpm does not provide the required ake Error at /usr/lib64/cmake/Qt5/Qt5Config.cmake:28 (find_package): Could not find a package confi

-- Install# Fedora 36 provides boost-devel-1.76.0-11.fc36.i686, wsjtx asking for boost0devel-1.71 error: Problem: conflicting requests - nothing provides libboost_filesystem.so.1.71.0()(64bit) needed

Last metadata expiration check: 0:03:08 ago on Tue 21 Jun 2022 11:40:16 AM MDT. No match for argument: Qt5SerialPort Error: Unable to find a match: Qt5SerialPort

Output folder: C:\WSJT\wsjtx Output folder: C:\WSJT\wsjtx\bin Can't write: C:\WSJT\wsjtx\bin\Qt5Core.dll

Changed rigs from KX3 using serial USB adapter to K3s with USB radio interface. Before WSJTX worked fine but suddenly the FT8 mode would randomly just switch from audio signal going to K3s via usb to

What could cause WSJTx to suddenly stop transmitting? It's a PTT issue not audio. The CAT test and PTT test operate normally. As does TUNE. TIA KD0XX Rod

If you're having trouble with WSJTx V2.5.4 closing whenever it does a band hop, try uninstalling and re-installing in compatibility mode. When I did, it says something about W8 settings being used. Ba

My NTP works great all of the time and the Offset (seen in Quick NTP Status) is always well below 5.00. Great. The one oddity is when the computer is turned on from a cold start in the mornings, where

Where can I find an explanation of what this means? Tnx AH0U

Need a link to a primer on operating FT8. If it has WSJTX going through DXLabs, so much the better. Thanks, Earl KD5XB DM84

I'm using Hampi 64 bit on a raspberry Pi 4 when I use VNC on display :1, WSJT-X doesn't see my external sound device, working from console and VNC via display :0 No idea if anyone else has come across

I have noticed when manually trying to enter a contact in WSJT-X in FD mode while using N3FJP link, that entering the exchange in small letters gets a bad entry when sending to N3FJP. N3FJP requires E

I noticed in 2.6.0-rc1 gives me a worked B4 color when I tick on a CQ, even though the station is not a B4. Only occurs when the call I tick is in the DX call box. Is that normal now? Windows 10 with

I was operating of 40 meters and a received the message "W7EDP QSY 60m". I'm a little mystified by this message. Does some some one want me to change frequencies to 60 meters? Or is there a another me

Was trying to diagnose a double HRD LB logging problem, but in trying to roll back from v2.6.0-rc1 to v2.5.4 to check, I found that the older version would install, but would NOT execute. Rebooted and

I’ve installed on Windows 10, MacOS 12.4 and Raspberry Pi using the provided installers. All seem to functioning as intended. When I try to build from source for MacOS, I get the following fatal error

How do I set RR73 in the Generated Message list? Tnx.

I've moved an external USB adapter from my Linux Mint 19.3 laptop to my Linux 20.3. WSJTX works fine on the 19.3 laptop but on the 20.3 laptop my Elecraft KX3 doesn't appear to be transmitting even th

The mode buttons in Win11 seem to be too small for various font sizes in Win11. In Win11, my font is Calibri, Regular, 10. I have tried Arial, Regular, 10; Calibri, Light, 10; and Arial, Regular, 8. E