Hi Group, I am using a FT-991A. I have a reception filter set to 9K width. I noticed that the spectrum has a high background noise at low frequency (~0Hz). I pasted the imaged below. What is the reaso

Ok had a post a few weeks ago and thought the issue was fixed but it is back again... I have a macbook pro M1. I have installed the Silicon Labs CP210x Drivers and am seeing the USB device drive pulsi

I'm having an issue getting the WSPR band hopping to work. I'm running 2.6.1 on Windows 11 (but had the issue before with 2.4 as well). One thing I did notice is when I installed WSJT-X the file 'user

Hallo several times, the sound output no longer works, there is no sound with the "TUNE" button and also during the QSO. either I stop WSJTX and restart WSJTX or I go to Setup/audio, I choose the same

Suddenly the top bar is wsjt-x disappeared and even after deleting the wsjtx folder and reinstalling the top menu bar didn't come back. The only way to access the setup is to disconnect the radio and

I have been experimenting with 25 foor USB orEthernet cables beteween th IC-7610 and my laptop to see what will work. Tried chokes on the cables, etc and so far no luck. If I use a short 6 foor USB ca

I am a proud owner of the FT 1000 mark-v but suddenly won't work in the LSB,USB and AM modes. Any idea as to what went wrong ? Anthony H Henderson J73HA...

OK, so before you tell me that my propogation is simply "different" because I changed locations...(was KD2NBC -New York, now HI7/KD2NBC Dominican Republic), I would like to say that I have worked well

Using WSJT-X we want the Big cty.dat file. Thanks to Jim Reisert AD1C. Get here https://www.country-files.com/big-cty-16-march-2023/ Release notes: 16 March 2023 (CTY-3310) VER20230316, Version entity

Hi Have you guys noticed an increase in the number of attempts of fake contacts to get in your log. I have and I can't be the only one. It starts as one rust colored line and then another and another

I have been trying for 3 weeks now to get WSJTX setup and running with my new FT-991A. I can decode just fine. I can also be HEARD as shown in pskreporter.info website. But when I transmit CQ.. I have

I am running Win 10 and WSJT 2.6.1 and am able to receive and decode FT8. I am unable to transmit. PTT is working, but there is no RF output. The interface is a USB Tigertronics. I have played with th

Have had WSJT-X up and running for a few weeks now. Been tweaking and adjusting it for my needs. At this moment what I am having the most problem with is getting it to tell me if I worked a station B4

Hello All, SO in Log4OM there is a way to auto-start WSJT-X however it starts the FT-891 config that I have instead of the OmniRig config that I have. So, my question is, is there a way to designate a

I just had something "odd" happen. It gave me a chuckle, but at the same time, I need to know if *I* did something incorrectly. I received the following -- on second look, it's just a bad decode, but

1) Strong signal mixing with Line-In, causing 60db green wsjty-x bar even with radio turned off 2) Then, with radio on and tuned to an FT8 signal, I can increase volume and add to the 60db mystery sig

It would be very helpful -if the DX station is using F/H, then his WSJT should be able to include something in the data stream that the hounds' copy of WSJT decodes into a special indicator on the scr

Some RFzero users who are running the FST4W standalone transmitter https://rfzero.net/examples/fst4w-transmitter/ have contacted me about the nominal frequency, and whether it has to be offset or not.

I had a near lightening strike which caused my signalink usb to stop working. I got it fixed, but cannot receive any signals on my wsjt software. I called Tigertronics and the man said I should comple

I'm upgrading a Raspberry Pi 4/8G that I built up a couple of years ago, and am trying to make sure I upgrade all the pieces in the right order. I've been successfully using an IC-7100 with flrig but