|
I operate mostly via Chrome Remote Desktop on Android devices. Changing the transmit frequency is extremely difficult. (Click on the waterfall at the desired transmit frequency - this changes the receive frequency. Click the up-arrow under the transmit frequency text box - this sets the transmit frequency to the receive frequency. Then double-click the desired receive conversation in the Band Activity textbox - this sets the receive frequency where it belongs).
Years ago, I found the code that I want to edit. I attempted to recompile The Whole Thing again. It was a nightmare. Instructions are online, but I kept getting error messages I couldn't interpret, much less remedy. Also, compiling a version for Linux won't help as Chrome Remote Desktop doesn't work on Linux.
To compound the problem, Chrome Remote Desktop just "upgraded" so I have to drag the cursor around the screen to implement all the "clicks".
Please help!
--
Al Gerheim, K1QN
|
|
|
Shift-click in the waterfall or spectrum to set your transmit frequency.
73,
Rich VE3KI
toggle quoted message
Show quoted text
On Sun, Mar 19, 2023 at 12:35 PM, Albert Gerheim wrote:
I operate mostly via Chrome Remote Desktop on Android devices. Changing the
transmit frequency is extremely difficult. (Click on the waterfall at the
desired transmit frequency - this changes the receive frequency. Click the
up-arrow under the transmit frequency text box - this sets the transmit
frequency to the receive frequency. Then double-click the desired receive
conversation in the Band Activity textbox - this sets the receive frequency
where it belongs).
Years ago, I found the code that I want to edit. I attempted to recompile The
Whole Thing again. It was a nightmare. Instructions are online, but I kept
getting error messages I couldn't interpret, much less remedy. Also,
compiling a version for Linux won't help as Chrome Remote Desktop doesn't work
on Linux.
To compound the problem, Chrome Remote Desktop just "upgraded" so I have to
drag the cursor around the screen to implement all the "clicks".
Please help!
--
Al Gerheim, K1QN
|
|
|
This can't be done when operating remotely from an android device.
toggle quoted message
Show quoted text
On Sun, Mar 19, 2023 at 1:10 PM ve3ki <ve3iay@...> wrote: Shift-click in the waterfall or spectrum to set your transmit frequency.
73,
Rich VE3KI
On Sun, Mar 19, 2023 at 12:35 PM, Albert Gerheim wrote:
I operate mostly via Chrome Remote Desktop on Android devices. Changing
the
transmit frequency is extremely difficult. (Click on the waterfall at the
desired transmit frequency - this changes the receive frequency. Click the
up-arrow under the transmit frequency text box - this sets the transmit
frequency to the receive frequency. Then double-click the desired receive
conversation in the Band Activity textbox - this sets the receive frequency
where it belongs).
Years ago, I found the code that I want to edit. I attempted to recompile The
Whole Thing again. It was a nightmare. Instructions are online, but I kept
getting error messages I couldn't interpret, much less remedy. Also,
compiling a version for Linux won't help as Chrome Remote Desktop doesn't work
on Linux.
To compound the problem, Chrome Remote Desktop just "upgraded" so I have to
drag the cursor around the screen to implement all the "clicks".
Please help!
--
Al Gerheim, K1QN
-- Al Gerheim
--
Al Gerheim, K1QN
|
|
|
Al-
I use NoMachine for remote work. Works on all OS. shift click works.
it's free. tryit.
Thanks Dan KC2STA
toggle quoted message
Show quoted text
On Sun, Mar 19, 2023 at 2:11 PM Albert Gerheim <alpg49@...> wrote: This can't be done when operating remotely from an android device.
On Sun, Mar 19, 2023 at 1:10 PM ve3ki <ve3iay@...> wrote:
Shift-click in the waterfall or spectrum to set your transmit frequency.
73,
Rich VE3KI
On Sun, Mar 19, 2023 at 12:35 PM, Albert Gerheim wrote:
I operate mostly via Chrome Remote Desktop on Android devices.
Changing
the
transmit frequency is extremely difficult. (Click on the waterfall at the
desired transmit frequency - this changes the receive frequency. Click the
up-arrow under the transmit frequency text box - this sets the transmit
frequency to the receive frequency. Then double-click the desired receive
conversation in the Band Activity textbox - this sets the receive frequency
where it belongs).
Years ago, I found the code that I want to edit. I attempted to recompile The
Whole Thing again. It was a nightmare. Instructions are online, but I kept
getting error messages I couldn't interpret, much less remedy. Also,
compiling a version for Linux won't help as Chrome Remote Desktop doesn't work
on Linux.
To compound the problem, Chrome Remote Desktop just "upgraded" so I have
to
drag the cursor around the screen to implement all the "clicks".
Please help!
--
Al Gerheim, K1QN
--
Al Gerheim
--
Al Gerheim, K1QN
--
Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
|
|
|
How do I enter a shift-click on an android phone? (If I could crack that issue, there would be no problem.) On Sun, Mar 19, 2023 at 3:45 PM d_ziolkowski <dan.ziolkowski@...> wrote: Al-
I use NoMachine for remote work. Works on all OS. shift click works.
it's free. tryit.
Thanks Dan KC2STA
On Sun, Mar 19, 2023 at 2:11 PM Albert Gerheim <alpg49@...> wrote:
This can't be done when operating remotely from an android device.
On Sun, Mar 19, 2023 at 1:10 PM ve3ki <ve3iay@...> wrote:
Shift-click in the waterfall or spectrum to set your transmit frequency.
73,
Rich VE3KI
On Sun, Mar 19, 2023 at 12:35 PM, Albert Gerheim wrote:
I operate mostly via Chrome Remote Desktop on Android devices.
Changing
the
transmit frequency is extremely difficult. (Click on the waterfall
at
the
desired transmit frequency - this changes the receive frequency.
Click
the
up-arrow under the transmit frequency text box - this sets the
transmit
frequency to the receive frequency. Then double-click the desired receive
conversation in the Band Activity textbox - this sets the receive frequency
where it belongs).
Years ago, I found the code that I want to edit. I attempted to recompile The
Whole Thing again. It was a nightmare. Instructions are online,
but I
kept
getting error messages I couldn't interpret, much less remedy. Also,
compiling a version for Linux won't help as Chrome Remote Desktop doesn't work
on Linux.
To compound the problem, Chrome Remote Desktop just "upgraded" so I have
to
drag the cursor around the screen to implement all the "clicks".
Please help!
--
Al Gerheim, K1QN
--
Al Gerheim
--
Al Gerheim, K1QN
--
Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
-- Al Gerheim -- Al Gerheim, K1QN
|
|
|
I'm tempted to try to compile it again, but I don't expect a better result. On Sun, Mar 19, 2023 at 4:24 PM Albert Gerheim via groups.io <alpg49= gmail.com@groups.io> wrote: How do I enter a shift-click on an android phone?
(If I could crack that issue, there would be no problem.)
On Sun, Mar 19, 2023 at 3:45 PM d_ziolkowski <dan.ziolkowski@...>
wrote:
Al-
I use NoMachine for remote work. Works on all OS. shift click works.
it's free. tryit.
Thanks Dan KC2STA
On Sun, Mar 19, 2023 at 2:11 PM Albert Gerheim <alpg49@...> wrote:
This can't be done when operating remotely from an android device.
On Sun, Mar 19, 2023 at 1:10 PM ve3ki <ve3iay@...> wrote:
Shift-click in the waterfall or spectrum to set your transmit frequency.
73,
Rich VE3KI
On Sun, Mar 19, 2023 at 12:35 PM, Albert Gerheim wrote:
I operate mostly via Chrome Remote Desktop on Android devices.
Changing
the
transmit frequency is extremely difficult. (Click on the waterfall
at
the
desired transmit frequency - this changes the receive frequency.
Click
the
up-arrow under the transmit frequency text box - this sets the
transmit
frequency to the receive frequency. Then double-click the desired receive
conversation in the Band Activity textbox - this sets the receive frequency
where it belongs).
Years ago, I found the code that I want to edit. I attempted to recompile The
Whole Thing again. It was a nightmare. Instructions are online,
but I
kept
getting error messages I couldn't interpret, much less remedy.
Also,
compiling a version for Linux won't help as Chrome Remote Desktop doesn't work
on Linux.
To compound the problem, Chrome Remote Desktop just "upgraded" so I
have
to
drag the cursor around the screen to implement all the "clicks".
Please help!
--
Al Gerheim, K1QN
--
Al Gerheim
--
Al Gerheim, K1QN
--
Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
--
Al Gerheim
--
Al Gerheim, K1QN
-- Al Gerheim -- Al Gerheim, K1QN
|
|
|
Can you manually key in the transmit freq on the Android? I often modify the transmit freq via the keyboard in Windows vs Shift-Click. Sometimes I change 1or 2 digits only.
N0VB
Glenn Van Benschoten
gtvanben@...
toggle quoted message
Show quoted text
-----Original Message----- From: main@WSJTX.groups.io [mailto:main@WSJTX.groups.io] On Behalf Of d_ziolkowski Sent: Sunday, March 19, 2023 3:45 PM To: main@wsjtx.groups.io Subject: Re: [WSJTX] Simplify setting TX frequency Al- I use NoMachine for remote work. Works on all OS. shift click works. it's free. tryit. Thanks Dan KC2STA On Sun, Mar 19, 2023 at 2:11 PM Albert Gerheim <alpg49@...> wrote: This can't be done when operating remotely from an android device.
On Sun, Mar 19, 2023 at 1:10 PM ve3ki <ve3iay@...> wrote:
Shift-click in the waterfall or spectrum to set your transmit frequency.
73,
Rich VE3KI
On Sun, Mar 19, 2023 at 12:35 PM, Albert Gerheim wrote:
I operate mostly via Chrome Remote Desktop on Android devices.
Changing
the
transmit frequency is extremely difficult. (Click on the waterfall at the
desired transmit frequency - this changes the receive frequency. Click the
up-arrow under the transmit frequency text box - this sets the transmit
frequency to the receive frequency. Then double-click the desired receive
conversation in the Band Activity textbox - this sets the receive frequency
where it belongs).
Years ago, I found the code that I want to edit. I attempted to recompile The
Whole Thing again. It was a nightmare. Instructions are online, but I kept
getting error messages I couldn't interpret, much less remedy. Also,
compiling a version for Linux won't help as Chrome Remote Desktop doesn't work
on Linux.
To compound the problem, Chrome Remote Desktop just "upgraded" so I have
to
drag the cursor around the screen to implement all the "clicks".
Please help!
--
Al Gerheim, K1QN
--
Al Gerheim
--
Al Gerheim, K1QN
-- Dan Ziolkowski KC2STA SKCC #4290T Ubuntu LINUX
|
|
|
Very troublesome just to type in. I would rather go through the tap-dance of the 3 clicks and dragging the cursor. Also have to look at the waterfall to find a good frequency in the first place. IMO, the easiest fix is to swap the functionality of click and shift-click for the waterfall window. The only problem is compiling after the change. Changing the code is no problem at all. (I used to write code, now retired.) On Sun, Mar 19, 2023 at 5:14 PM Glenn Van Benschoten <gtvanben@...> wrote: Can you manually key in the transmit freq on the Android? I often modify
the transmit freq via the keyboard in Windows vs Shift-Click. Sometimes I
change 1or 2 digits only.
N0VB
Glenn Van Benschoten
gtvanben@...
-----Original Message-----
From: main@WSJTX.groups.io [mailto:main@WSJTX.groups.io] On Behalf Of
d_ziolkowski
Sent: Sunday, March 19, 2023 3:45 PM
To: main@wsjtx.groups.io
Subject: Re: [WSJTX] Simplify setting TX frequency
Al-
I use NoMachine for remote work. Works on all OS. shift click works.
it's free. tryit.
Thanks Dan KC2STA
On Sun, Mar 19, 2023 at 2:11 PM Albert Gerheim <alpg49@...> wrote:
This can't be done when operating remotely from an android device.
On Sun, Mar 19, 2023 at 1:10 PM ve3ki <ve3iay@...> wrote:
Shift-click in the waterfall or spectrum to set your transmit frequency.
73,
Rich VE3KI
On Sun, Mar 19, 2023 at 12:35 PM, Albert Gerheim wrote:
I operate mostly via Chrome Remote Desktop on Android devices.
Changing
the
transmit frequency is extremely difficult. (Click on the waterfall
at
the
desired transmit frequency - this changes the receive frequency.
Click
the
up-arrow under the transmit frequency text box - this sets the
transmit
frequency to the receive frequency. Then double-click the desired receive
conversation in the Band Activity textbox - this sets the receive frequency
where it belongs).
Years ago, I found the code that I want to edit. I attempted to recompile The
Whole Thing again. It was a nightmare. Instructions are online,
but I
kept
getting error messages I couldn't interpret, much less remedy. Also,
compiling a version for Linux won't help as Chrome Remote Desktop doesn't work
on Linux.
To compound the problem, Chrome Remote Desktop just "upgraded" so I have
to
drag the cursor around the screen to implement all the "clicks".
Please help!
--
Al Gerheim, K1QN
--
Al Gerheim
--
Al Gerheim, K1QN
--
Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
-- Al Gerheim -- Al Gerheim, K1QN
|
|
|
perhaps an external keyboard?
Thanks Dan KC2STA
toggle quoted message
Show quoted text
On Sun, Mar 19, 2023 at 4:24 PM Albert Gerheim <alpg49@...> wrote: How do I enter a shift-click on an android phone?
(If I could crack that issue, there would be no problem.)
On Sun, Mar 19, 2023 at 3:45 PM d_ziolkowski <dan.ziolkowski@...>
wrote:
Al-
I use NoMachine for remote work. Works on all OS. shift click works.
it's free. tryit.
Thanks Dan KC2STA
On Sun, Mar 19, 2023 at 2:11 PM Albert Gerheim <alpg49@...> wrote:
This can't be done when operating remotely from an android device.
On Sun, Mar 19, 2023 at 1:10 PM ve3ki <ve3iay@...> wrote:
Shift-click in the waterfall or spectrum to set your transmit frequency.
73,
Rich VE3KI
On Sun, Mar 19, 2023 at 12:35 PM, Albert Gerheim wrote:
I operate mostly via Chrome Remote Desktop on Android devices.
Changing
the
transmit frequency is extremely difficult. (Click on the waterfall
at
the
desired transmit frequency - this changes the receive frequency.
Click
the
up-arrow under the transmit frequency text box - this sets the
transmit
frequency to the receive frequency. Then double-click the desired receive
conversation in the Band Activity textbox - this sets the receive frequency
where it belongs).
Years ago, I found the code that I want to edit. I attempted to recompile The
Whole Thing again. It was a nightmare. Instructions are online,
but I
kept
getting error messages I couldn't interpret, much less remedy.
Also,
compiling a version for Linux won't help as Chrome Remote Desktop doesn't work
on Linux.
To compound the problem, Chrome Remote Desktop just "upgraded" so I
have
to
drag the cursor around the screen to implement all the "clicks".
Please help!
--
Al Gerheim, K1QN
--
Al Gerheim
--
Al Gerheim, K1QN
--
Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
--
Al Gerheim
--
Al Gerheim, K1QN
--
Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
|
|
|
I may gat a bluetooth keyboard just to find out. The new rendition of
Chrome RD. Makes entering text at all very troublesome.
A good idea.
I'm thinking of trying to recompile the whole thing again.
Al Gerheim
Horribly mistyped on my droid.
toggle quoted message
Show quoted text
On Sun, Mar 19, 2023, 5:53 PM d_ziolkowski <dan.ziolkowski@...> wrote: perhaps an external keyboard?
Thanks Dan KC2STA
On Sun, Mar 19, 2023 at 4:24 PM Albert Gerheim <alpg49@...> wrote:
How do I enter a shift-click on an android phone?
(If I could crack that issue, there would be no problem.)
On Sun, Mar 19, 2023 at 3:45 PM d_ziolkowski <dan.ziolkowski@...>
wrote:
Al-
I use NoMachine for remote work. Works on all OS. shift click works.
it's free. tryit.
Thanks Dan KC2STA
On Sun, Mar 19, 2023 at 2:11 PM Albert Gerheim <alpg49@...> wrote:
This can't be done when operating remotely from an android device.
On Sun, Mar 19, 2023 at 1:10 PM ve3ki <ve3iay@...> wrote:
Shift-click in the waterfall or spectrum to set your transmit frequency.
73,
Rich VE3KI
On Sun, Mar 19, 2023 at 12:35 PM, Albert Gerheim wrote:
I operate mostly via Chrome Remote Desktop on Android devices.
Changing
the
transmit frequency is extremely difficult. (Click on the
waterfall
at
the
desired transmit frequency - this changes the receive frequency.
Click
the
up-arrow under the transmit frequency text box - this sets the
transmit
frequency to the receive frequency. Then double-click the
desired
receive
conversation in the Band Activity textbox - this sets the receive frequency
where it belongs).
Years ago, I found the code that I want to edit. I attempted to recompile The
Whole Thing again. It was a nightmare. Instructions are online,
but I
kept
getting error messages I couldn't interpret, much less remedy.
Also,
compiling a version for Linux won't help as Chrome Remote Desktop doesn't work
on Linux.
To compound the problem, Chrome Remote Desktop just "upgraded"
so I
have
to
drag the cursor around the screen to implement all the "clicks".
Please help!
--
Al Gerheim, K1QN
--
Al Gerheim
--
Al Gerheim, K1QN
--
Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
--
Al Gerheim
--
Al Gerheim, K1QN
--
Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
--
Al Gerheim, K1QN
|
|
|
