Locked Any way to query the current state, (in or out of HOUND mode), of WSJT-X? #FoxAndHound


Dave (NK7Z)
 

Hello,

I'm looking for a way to be able to use an external program to tell if WSJT is in HOUND mode? Is there some documentation covering this anyplace? I want to read the state, (in, or out, of HOUND mode), of the program at any arbitrary time. Is there some file I can read that contains this information in realtime? I see a lot of references to HOUND in the ini file, but do not know if anything changes there, or of there is an accepted location to look for state information.

NK7Z
Dave


Mike Black
 

The Status message contains Special Operation Mode

 *    The Special operation mode is  an enumeration that indicates the
 *    setting  selected  in  the  WSJT-X  "Settings->Advanced->Special
 *    operating activity" panel. The values are as follows:
 *
 *       0 -> NONE
 *       1 -> NA VHF
 *       2 -> EU VHF
 *       3 -> FIELD DAY
 *       4 -> RTTY RU
 *       5 -> WW DIGI
 *       6 -> FOX
 *       7 -> HOUND
 *       8 -> ARRL DIGI


Mike W9MDB

On Friday, March 24, 2023 at 10:08:15 AM CDT, Dave (NK7Z) <dave@...> wrote:





Hello,

I'm looking for a way to be able to use an external program to tell if WSJT is in HOUND mode?  Is there some documentation covering this anyplace?  I want to read the state, (in, or out, of HOUND mode), of the program at any arbitrary time.  Is there some file I can read that contains this information in realtime?  I see a lot of references to HOUND in the ini file, but do not know if anything changes there, or of there is an accepted location to look for state information.

NK7Z
Dave


Dave (NK7Z)
 

Hello,

Thank you Mike!! How does one access that message? Is it documented anyplace?

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 3/24/23 08:15, Michael Black via groups.io wrote:
The Status message contains Special Operation Mode
 *    The Special operation mode is  an enumeration that indicates the
 *    setting  selected  in  the  WSJT-X  "Settings->Advanced->Special
 *    operating activity" panel. The values are as follows:
 *
 *       0 -> NONE
 *       1 -> NA VHF
 *       2 -> EU VHF
 *       3 -> FIELD DAY
 *       4 -> RTTY RU
 *       5 -> WW DIGI
 *       6 -> FOX
 *       7 -> HOUND
 *       8 -> ARRL DIGI
Mike W9MDB
On Friday, March 24, 2023 at 10:08:15 AM CDT, Dave (NK7Z) <dave@...> wrote:
Hello,
I'm looking for a way to be able to use an external program to tell if WSJT is in HOUND mode?  Is there some documentation covering this anyplace?  I want to read the state, (in, or out, of HOUND mode), of the program at any arbitrary time.  Is there some file I can read that contains this information in realtime?  I see a lot of references to HOUND in the ini file, but do not know if anything changes there, or of there is an accepted location to look for state information.
NK7Z
Dave


Mike Black
 

You have to capture the network messages via whatever software you want to write.

e.g.
https://github.com/bmo/py-wsjtx

Mike W9MDB

On Saturday, March 25, 2023 at 04:01:24 AM CDT, Dave (NK7Z) <dave@...> wrote:





Hello,

Thank you Mike!!  How does one access that message?  Is it documented
anyplace?

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 3/24/23 08:15, Michael Black via groups.io wrote:
The Status message contains Special Operation Mode

   *    The Special operation mode is  an enumeration that indicates the
   *    setting  selected  in  the  WSJT-X  "Settings->Advanced->Special
   *    operating activity" panel. The values are as follows:
   *
   *       0 -> NONE
   *       1 -> NA VHF
   *       2 -> EU VHF
   *       3 -> FIELD DAY
   *       4 -> RTTY RU
   *       5 -> WW DIGI
   *       6 -> FOX
   *       7 -> HOUND
   *       8 -> ARRL DIGI


Mike W9MDB







On Friday, March 24, 2023 at 10:08:15 AM CDT, Dave (NK7Z) <dave@...> wrote:





Hello,

I'm looking for a way to be able to use an external program to tell if WSJT is in HOUND mode?  Is there some documentation covering this anyplace?  I want to read the state, (in, or out, of HOUND mode), of the program at any arbitrary time.  Is there some file I can read that contains this information in realtime?  I see a lot of references to HOUND in the ini file, but do not know if anything changes there, or of there is an accepted location to look for state information.

NK7Z
Dave










Dave (NK7Z)
 

Thanks sir!

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 3/25/23 06:21, Michael Black via groups.io wrote:
You have to capture the network messages via whatever software you want to write.
e.g.
https://github.com/bmo/py-wsjtx
Mike W9MDB
On Saturday, March 25, 2023 at 04:01:24 AM CDT, Dave (NK7Z) <dave@...> wrote:
Hello,
Thank you Mike!!  How does one access that message?  Is it documented
anyplace?
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 3/24/23 08:15, Michael Black via groups.io wrote:
The Status message contains Special Operation Mode

   *    The Special operation mode is  an enumeration that indicates the
   *    setting  selected  in  the  WSJT-X  "Settings->Advanced->Special
   *    operating activity" panel. The values are as follows:
   *
   *       0 -> NONE
   *       1 -> NA VHF
   *       2 -> EU VHF
   *       3 -> FIELD DAY
   *       4 -> RTTY RU
   *       5 -> WW DIGI
   *       6 -> FOX
   *       7 -> HOUND
   *       8 -> ARRL DIGI


Mike W9MDB