Date
1 - 10 of 10
Locked flex radio error in radio setup under flex6xxx #FlexRadio
|
nicholasmahr1@...
Can confirm this problem is still happening, Yestorday I upgraded to RC5 from RC4 on princetons website, and then my Flex Cat control wouldent work as shown in OP's post. Used the new dll and pasted it in and its working again! Thank you guys.
|
|
|
|
Michael Black
The Princeton site still contains the broken version.
toggle quoted message
Show quoted text
This 64-bit DLL fixes the problem. 32-bit DLL will be available tomorrow from https://n0nb.users.sourceforge.net/ https://www.dropbox.com/s/snmkzu8eif89yqs/libhamlib-4.dll?dl=0 Mike W9MDB On Wednesday, November 30, 2022 at 05:31:07 PM CST, AB8WD-Willie via groups.io <ab8wd@...> wrote:
They have updated a version for flex6xxx on the website correcting the issue. |
|
|
|
AB8WD-Willie
They have updated a version for flex6xxx on the website correcting the issue.
|
|
|
|
Pat Patterson
Willie,
toggle quoted message
Show quoted text
What is the error? You say the Flex/Anan PowerSDR selection works....is that with the network connection to a Virtual Port of USB-Serial connection? Thanks, Pat, W5VY - Flex 6700 -----Original Message-----
From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of AB8WD-Willie via groups.io Sent: Tuesday, November 29, 2022 6:47 PM To: main@WSJTX.groups.io Subject: Re: [WSJTX] flex radio error in radio setup under flex6xxx #FlexRadio On Wed, Nov 30, 2022 at 12:01 AM, Michael Black wrote: Downloaded file still no joy same error The Flex/Anan Powersdr/Thetis in radio Settings does work just an FYI |
|
|
|
Michael Black
Would seem you didn't place the dll in the right place or didn't call it libhamlib-4.dll
toggle quoted message
Show quoted text
Mike W9MDB On Tuesday, November 29, 2022 at 06:47:30 PM CST, AB8WD-Willie via groups.io <ab8wd@...> wrote:
On Wed, Nov 30, 2022 at 12:01 AM, Michael Black wrote: Downloaded file still no joy same error The Flex/Anan Powersdr/Thetis in radio Settings does work just an FYI |
|
|
|
Ed Wilson
Mike's fix has things working for me with my Flex-6700...thanks!
|
|
|
|
Fixed on our Flex6400 following the procedure set by Mike. Make sure WSJT is closed AND SSDR is closed.
73 Alessandro i2sva |
|
|
|
AB8WD-Willie
On Wed, Nov 30, 2022 at 12:01 AM, Michael Black wrote:
Downloaded file still no joy same error The Flex/Anan Powersdr/Thetis in radio Settings does work just an FYI |
|
|
|
Michael Black
It's been fixed.
toggle quoted message
Show quoted text
New hamlib for installation directions #1 Shut down WSJTX #2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of WSJTX -- hopefully your browser doesn't block it but may warn you multiple times. If you can do a "Save As" you can save it directly in the appropriate WSJTX directory C:\WSJT\WSJTX\bin and replace the libhamlib-4.dll that is there. http://n0nb.users.sourceforge.net/dll32/libhamlib-4.dll http://n0nb.users.sourceforge.net/dll64/libhamlib-4.dll Linux/Unix/Mac users need to compile the latest tar file from http://n0nb.users.sourceforge.net Note: If compiling on Unix-like systems please uninstall any Hamlib package you have before installing the new build #3 If you don't save directly you need to open a file browser and move the file that way. If you're not familiar with that here's a video on the file browser - https://www.youtube.com/watch?v=AyVqCJrs9dk Mike W9MDB On Tuesday, November 29, 2022 at 05:15:24 PM CST, AB8WD-Willie via groups.io <ab8wd@...> wrote:
I try flex6xxx and get hamlib error Hamlib error: 0000 49 46 30 30 30 31 34 30 37 34 30 30 30 30 30 31 IF00014074000001 0010 30 2b 30 30 30 30 30 30 30 30 30 30 30 39 30 30 0+00000000000900 0020 30 30 30 30 30 3b 00000; kenwood_transaction: read_string(expected=128, len=38)='IF000140740000010+0000000000090000000;' kenwood_transaction: returning RIG_OK, retval=0 kenwood.c(613):kenwood_transaction returning2(0) kenwood_safe_transaction: wrong answer; len for cmd IF: expected = 38, got 37 kenwood.c(683):kenwood_safe_transaction returning2(-8) Protocol error 3:kenwood.c(1102):kenwood_get_if returning(-8) Protocol error 2:kenwood.c(1736):kenwood_get_vfo_if returning(-8) Protocol error Protocol error ) 1:rig_get_vfo: elapsed=948ms 1:rig.c(2871):rig_get_vfo returning(-8) Protocol error Protocol error Protocol error while testing getting current VFO Timestamp: 2022-11-29T23:02:09.291Z |
|
|
|
AB8WD-Willie
I try flex6xxx and get hamlib error
Hamlib error: 0000 49 46 30 30 30 31 34 30 37 34 30 30 30 30 30 31 IF00014074000001 0010 30 2b 30 30 30 30 30 30 30 30 30 30 30 39 30 30 0+00000000000900 0020 30 30 30 30 30 3b 00000; kenwood_transaction: read_string(expected=128, len=38)='IF000140740000010+0000000000090000000;' kenwood_transaction: returning RIG_OK, retval=0 kenwood.c(613):kenwood_transaction returning2(0) kenwood_safe_transaction: wrong answer; len for cmd IF: expected = 38, got 37 kenwood.c(683):kenwood_safe_transaction returning2(-8) Protocol error 3:kenwood.c(1102):kenwood_get_if returning(-8) Protocol error 2:kenwood.c(1736):kenwood_get_vfo_if returning(-8) Protocol error Protocol error ) 1:rig_get_vfo: elapsed=948ms 1:rig.c(2871):rig_get_vfo returning(-8) Protocol error Protocol error Protocol error while testing getting current VFO Timestamp: 2022-11-29T23:02:09.291Z |
|
|