Date
1 - 3 of 3
Locked Xubuntu 22.04 audio working on WSJT-x #WSJTX_config
|
DAVE Enright <KD2RER@...>
I am using a pi-400 and xubuntu 22.04. I got WSJT-X connected to an IC-7610.
Radio Tab: radio =ic7610 Serial port = /dev/ttyUSB0 Audio Tab Input: hw:CARD=Codec,DEV=0 Output: alsa_output.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00.anlog-stero I did find that for my setup, the Pwr slider in WSJT-X on my PI-400 had to be lowered to 3 notches from the bottom or it stopped the program and Hamlib error. I hope this helps some folks, as it is a pain getting this to work in Ubuntu. 73 K3WHD |
|
|
|
Mike Black
If USB drops out at higher power levels that is RFI in your shack.
toggle quoted message
Show quoted text
Please describe your grounding system. That's the first thing to fix. Mike W9MDB On Monday, July 11, 2022 at 07:06:18 PM CDT, DAVE Enright <kd2rer@...> wrote:
I am using a pi-400 and xubuntu 22.04. I got WSJT-X connected to an IC-7610. Radio Tab: radio =ic7610 Serial port = /dev/ttyUSB0 Audio Tab Input: hw:CARD=Codec,DEV=0 Output: alsa_output.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00.anlog-stero I did find that for my setup, the Pwr slider in WSJT-X on my PI-400 had to be lowered to 3 notches from the bottom or it stopped the program and Hamlib error. I hope this helps some folks, as it is a pain getting this to work in Ubuntu. 73 K3WHD |
|
|
|
DAVE Enright <KD2RER@...>
No I found that on a PI-400 they crank the audio settings up. The PLAYBACK slide bar was WAY Over 150%. I turned it down to 100% and move the Pwr bar in WSJT-X and all is working normal, NO program failure. Made 25 contacts and now getting other software setup. I do have to say, setting up the audio tab in WSJT-X was no walk in the park as it was in windows 10. But bottom line I am that much closer to saying good-bye to Microsoft....LOL,
Thanks for idea, I have a grounding rod and lighting protect and luck to say very little RFI in the shack. |
|
|