locked 055 Hz shift Issue #Cat_RigControl


tomtek123
 

I see that the latest WSJT 2.6.0 rc1 contains fixes for the 055 Hz shift issue that has been discussed before. I am running this WSJT version, and Omnirig 1.20 with a Yaesu FT5K, and I am still seeing the issue where the radio is shifted by 055 Hz, but it doesn’t shift back. I will say that it does not happen all the time, and it does seem that the issue has improved, but is not gone. Running W10, all updates included up to this point in time. I use a USB to rs232 converter, which I have had for years, and all the sleep settings for the USB ports are turned off.

Please let me know what additional data I can provide to assist.

Tom
W6TRH


Carl Griebno <k2gej.sc@...>
 

If you have (fake it) turned on in wsjt, Turn it off. See if that corrects
it.

On Sun, Jul 3, 2022, 11:05 AM tomtek123 <w6trh@...> wrote:

I see that the latest WSJT 2.6.0 rc1 contains fixes for the 055 Hz shift
issue that has been discussed before. I am running this WSJT version, and
Omnirig 1.20 with a Yaesu FT5K, and I am still seeing the issue where the
radio is shifted by 055 Hz, but it doesn’t shift back. I will say that it
does not happen all the time, and it does seem that the issue has improved,
but is not gone. Running W10, all updates included up to this point in
time. I use a USB to rs232 converter, which I have had for years, and all
the sleep settings for the USB ports are turned off.

Please let me know what additional data I can provide to assist.

Tom
W6TRH






tomtek123
 

I just verified my settings for Split Operation and it is set to Rig.

Tom
W6TRH


Dave Garber <ve3wej@...>
 

I stopped this by having wsjt go direct to the radio only while doing ft
modes, and then log program did not need cat control

not the best, but otherwise com0com and win4yaesu is an expensive option to
look into

Dave Garber
VE3WEJ / VE3IE

On Sun, Jul 3, 2022 at 11:05 AM tomtek123 <w6trh@...> wrote:

I see that the latest WSJT 2.6.0 rc1 contains fixes for the 055 Hz shift
issue that has been discussed before. I am running this WSJT version, and
Omnirig 1.20 with a Yaesu FT5K, and I am still seeing the issue where the
radio is shifted by 055 Hz, but it doesn’t shift back. I will say that it
does not happen all the time, and it does seem that the issue has improved,
but is not gone. Running W10, all updates included up to this point in
time. I use a USB to rs232 converter, which I have had for years, and all
the sleep settings for the USB ports are turned off.

Please let me know what additional data I can provide to assist.

Tom
W6TRH