1. #general
  2. Topics

Locked Contesting Decode Window #TechnicalHelpQuestion #ContestMode

Robert T
 

OK sorry guys, I didn't realize that window was generated by N1MM and not WSJT-X. Problem is being looked into.

Bob, K2RET

<pre>1</pre>

On 06/14/2022 4:42 PM Robert T <k2ret@...> wrote:


Awhile back changes were made to the Decode List window so that it could be expanded to widen the columns so that during a contest, the message field could be made wider to accommodate the wider messages from stations received. During the ARRL Digi & ARRL VHF contests, I widened the window and adjusted the width of the message field. After some time, the window defaulted back to the original size when I first opened it. I had to keep adjusting the window and message column width throughout the contest.

Is there a setting I'm missing or is there something that can be done on your end, programming wise, to repair this?

Thanks,

Bob, K2RET
Rick Ellison
 

Bob..
In the latest version N1MM one of the developers made changes to the decode window to maintain the correct changes to the column widths. Have you tried the latest version??

73 Rick N2AMG

-----Original Message-----
From: main@WSJTX.groups.io [mailto:main@WSJTX.groups.io] On Behalf Of Robert T
Sent: Thursday, June 16, 2022 9:16 AM
To: main@WSJTX.groups.io
Subject: Re: [WSJTX] Contesting Decode Window #TechnicalHelpQuestion #ContestMode

Pat,
I took your suggestion and sent it also to the N1MM+ reflector.

Bob, K2RET

<pre>1</pre>

On 06/15/2022 9:57 PM Pat Patterson <patw5vy@...> wrote:


Rob,
I noticed the same change in column width. I noted a "Clear" would reset it to original width...have to adjust again to see all of the message field. I think the Decode List Window is generated by N1MM+ Logger? You might consider cross-posting on that list if you haven't' already.

73,
Pat, W5VY/R

-----Original Message-----
From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of Robert T
Sent: Tuesday, June 14, 2022 3:42 PM
To: main@WSJTX.groups.io
Subject: [WSJTX] Contesting Decode Window #TechnicalHelpQuestion #ContestMode

Awhile back changes were made to the Decode List window so that it could be expanded to widen the columns so that during a contest, the message field could be made wider to accommodate the wider messages from stations received. During the ARRL Digi & ARRL VHF contests, I widened the window and adjusted the width of the message field. After some time, the window defaulted back to the original size when I first opened it. I had to keep adjusting the window and message column width throughout the contest.

Is there a setting I'm missing or is there something that can be done on your end, programming wise, to repair this?

Thanks,

Bob, K2RET













--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Robert T
 

Pat,
I took your suggestion and sent it also to the N1MM+ reflector.

Bob, K2RET

<pre>1</pre>

On 06/15/2022 9:57 PM Pat Patterson <patw5vy@...> wrote:


Rob,
I noticed the same change in column width. I noted a "Clear" would reset it to original width...have to adjust again to see all of the message field. I think the Decode List Window is generated by N1MM+ Logger? You might consider cross-posting on that list if you haven't' already.

73,
Pat, W5VY/R

-----Original Message-----
From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of Robert T
Sent: Tuesday, June 14, 2022 3:42 PM
To: main@WSJTX.groups.io
Subject: [WSJTX] Contesting Decode Window #TechnicalHelpQuestion #ContestMode

Awhile back changes were made to the Decode List window so that it could be expanded to widen the columns so that during a contest, the message field could be made wider to accommodate the wider messages from stations received. During the ARRL Digi & ARRL VHF contests, I widened the window and adjusted the width of the message field. After some time, the window defaulted back to the original size when I first opened it. I had to keep adjusting the window and message column width throughout the contest.

Is there a setting I'm missing or is there something that can be done on your end, programming wise, to repair this?

Thanks,

Bob, K2RET
Pat Patterson
 

Rob,
I noticed the same change in column width. I noted a "Clear" would reset it to original width...have to adjust again to see all of the message field. I think the Decode List Window is generated by N1MM+ Logger? You might consider cross-posting on that list if you haven't' already.

73,
Pat, W5VY/R

-----Original Message-----
From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of Robert T
Sent: Tuesday, June 14, 2022 3:42 PM
To: main@WSJTX.groups.io
Subject: [WSJTX] Contesting Decode Window #TechnicalHelpQuestion #ContestMode

Awhile back changes were made to the Decode List window so that it could be expanded to widen the columns so that during a contest, the message field could be made wider to accommodate the wider messages from stations received. During the ARRL Digi & ARRL VHF contests, I widened the window and adjusted the width of the message field. After some time, the window defaulted back to the original size when I first opened it. I had to keep adjusting the window and message column width throughout the contest.

Is there a setting I'm missing or is there something that can be done on your end, programming wise, to repair this?

Thanks,

Bob, K2RET
Robert T
 

Awhile back changes were made to the Decode List window so that it could be expanded to widen the columns so that during a contest, the message field could be made wider to accommodate the wider messages from stations received. During the ARRL Digi & ARRL VHF contests, I widened the window and adjusted the width of the message field. After some time, the window defaulted back to the original size when I first opened it. I had to keep adjusting the window and message column width throughout the contest.

Is there a setting I'm missing or is there something that can be done on your end, programming wise, to repair this?

Thanks,

Bob, K2RET

1 - 5 of 5