main@WSJTX.groups.io | Blank Band activity screen

Home Messages Hashtags Subgroups

Date Date 1 - 5 of 5

Blank Band activity screen

#decode

Rob Adams #29087 Morning all, See the included screenshot Set up ( Radio type, CAT/VOX / Com port 4, baud rate 9600 / audio Input is mono for the computer <> microphone (Computer using Realtek Microphone and Output is Speaker Realtek Audio). Tested OK ( green Test CAT button ) Test PTT button is greyed out. Trying FT8 but no Band activity noted. Wide graph indicates Tx. Depending on what / when receive ( Monitor) the Decode button flashes Blue intermittently. Tune button pressed ( steady clear tone ) so no issue there. I can hear the ‘warble’ from speaker in my radio .... presuming that’s the problem, signal not going into the computer ?? Do I need a separate mic/spkr cable(s) between devices? Can’t seem to find documentation on this issue. Did I miss something on the set up for ICOM IC 718? Windows 10 operating system. Thanks 73
More All Messages By This Member
Bill Somerville #29088 On 29/09/2021 15:25, Rob Adams wrote: Morning all, See the included screenshot Set up ( Radio type, CAT/VOX / Com port 4, baud rate 9600 / audio Input is mono for the computer <> microphone (Computer using Realtek Microphone and Output is Speaker Realtek Audio). Tested OK ( green Test CAT button ) Test PTT button is greyed out. Trying FT8 but no Band activity noted. Wide graph indicates Tx. Depending on what / when receive ( Monitor) the Decode button flashes Blue intermittently. Tune button pressed ( steady clear tone ) so no issue there. I can hear the ‘warble’ from speaker in my radio .... presuming that’s the problem, signal not going into the computer ?? Do I need a separate mic/spkr cable(s) between devices? Can’t seem to find documentation on this issue. Did I miss something on the set up for ICOM IC 718? Windows 10 operating system. Hi Rob, have you installed a 3rd party time synchronization tool like the Meinberg NTP Client as reccommened in the WSJT-X User Guide? https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-2.5.0.html#INSTALL_WIN 73 Bill G4WJS.
More All Messages By This Member
Rob Adams #29089 Bill No haven’t. Computer clock and WSJT clocks are the same. Browser guard (malware bytes) says I can’t download from NTP due to possible Trojan. R toggle quoted message Show quoted text On Sep 29, 2021, at 10:06, Bill Somerville <g4wjs@...> wrote: On 29/09/2021 15:25, Rob Adams wrote: Morning all, See the included screenshot Set up ( Radio type, CAT/VOX / Com port 4, baud rate 9600 / audio Input is mono for the computer <> microphone (Computer using Realtek Microphone and Output is Speaker Realtek Audio). Tested OK ( green Test CAT button ) Test PTT button is greyed out. Trying FT8 but no Band activity noted. Wide graph indicates Tx. Depending on what / when receive ( Monitor) the Decode button flashes Blue intermittently. Tune button pressed ( steady clear tone ) so no issue there. I can hear the ‘warble’ from speaker in my radio .... presuming that’s the problem, signal not going into the computer ?? Do I need a separate mic/spkr cable(s) between devices? Can’t seem to find documentation on this issue. Did I miss something on the set up for ICOM IC 718? Windows 10 operating system. Hi Rob, have you installed a 3rd party time synchronization tool like the Meinberg NTP Client as reccommened in the WSJT-X User Guide? https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-2.5.0.html#INSTALL_WIN 73 Bill G4WJS.
More All Messages By This Member
Jim Bacher - WB8VSU #29091 Rob, go to https://time.is. And check your computers time. Programs that are not downloaded a lot get tagged as containing viruses and Trojans when, they are actually clean. Typical for a lot of Ham programs. There are many ntp programs available, you need to run one of them as Bill suggested and per the wsjt-x install instructions. If your computers time is off, nothing will be decoded. Jim Bacher, WB8VSU wb8vsu@... https://trc.guru On Sep 29, 2021, at 12:30 PM, Rob Adams <ve6yxe@...> wrote: toggle quoted message Show quoted text Bill No haven’t. Computer clock and WSJT clocks are the same. Browser guard (malware bytes) says I can’t download from NTP due to possible Trojan. R On Sep 29, 2021, at 10:06, Bill Somerville <g4wjs@...> wrote: On 29/09/2021 15:25, Rob Adams wrote: Morning all, See the included screenshot Set up ( Radio type, CAT/VOX / Com port 4, baud rate 9600 / audio Input is mono for the computer <> microphone (Computer using Realtek Microphone and Output is Speaker Realtek Audio). Tested OK ( green Test CAT button ) Test PTT button is greyed out. Trying FT8 but no Band activity noted. Wide graph indicates Tx. Depending on what / when receive ( Monitor) the Decode button flashes Blue intermittently. Tune button pressed ( steady clear tone ) so no issue there. I can hear the ‘warble’ from speaker in my radio .... presuming that’s the problem, signal not going into the computer ?? Do I need a separate mic/spkr cable(s) between devices? Can’t seem to find documentation on this issue. Did I miss something on the set up for ICOM IC 718? Windows 10 operating system. Hi Rob, have you installed a 3rd party time synchronization tool like the Meinberg NTP Client as reccommened in the WSJT-X User Guide? https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-2.5.0.html#INSTALL_WIN 73 Bill G4WJS.
More All Messages By This Member
Michael Black #29092 His problem is no audio connection from the IC-718 to the computer. Limited budget and only has the headphone jack on the computer. Rig has 5-pin din for microphone and 1/8" speaker jack on back. So needs a minimum of a 1/8" stereo splitter to get the mic/phone out of the computer and a 5-pin DIN adapter to 1/8". Mike W9MDB On Wednesday, September 29, 2021, 12:53:07 PM CDT, Jim Bacher - WB8VSU <wb8vsu@...> wrote: Rob, go to https://time.is. And check your computers time. Programs that are not downloaded a lot get tagged as containing viruses and Trojans when, they are actually clean. Typical for a lot of Ham programs. There are many ntp programs available, you need to run one of them as Bill suggested and per the wsjt-x install instructions. If your computers time is off, nothing will be decoded. Jim Bacher, WB8VSU wb8vsu@... https://trc.guru On Sep 29, 2021, at 12:30 PM, Rob Adams <ve6yxe@...> wrote: toggle quoted message Show quoted text Bill No haven’t. Computer clock and WSJT clocks are the same. Browser guard (malware bytes) says I can’t download from NTP due to possible Trojan. R On Sep 29, 2021, at 10:06, Bill Somerville <g4wjs@...> wrote: On 29/09/2021 15:25, Rob Adams wrote: Morning all, See the included screenshot Set up ( Radio type, CAT/VOX / Com port 4, baud rate 9600 / audio Input is mono for the computer <> microphone (Computer using Realtek Microphone and Output is Speaker Realtek Audio). Tested OK ( green Test CAT button ) Test PTT button is greyed out. Trying FT8 but no Band activity noted. Wide graph indicates Tx. Depending on what / when receive ( Monitor) the Decode button flashes Blue intermittently. Tune button pressed ( steady clear tone ) so no issue there. I can hear the ‘warble’ from speaker in my radio .... presuming that’s the problem, signal not going into the computer ?? Do I need a separate mic/spkr cable(s) between devices? Can’t seem to find documentation on this issue. Did I miss something on the set up for ICOM IC 718? Windows 10 operating system. Hi Rob, have you installed a 3rd party time synchronization tool like the Meinberg NTP Client as reccommened in the WSJT-X User Guide? https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-2.5.0.html#INSTALL_WIN 73 Bill G4WJS.
More All Messages By This Member

1 - 5 of 5

1

Previous Topic Next Topic

Home Hashtags Subgroups About Features Pricing Updates Terms Help Twitter