locked Singalink USB w FT-890 - PTT Hang #FT8 #Yaesu
|
John Vlahos
Any help would be greatly appreciated:
Everything was working just fine on FT8 with the Yaesu FT-890, Signalink USB and HRD. Played around with DM780 a bit and now WSJT-X hangs on PTT and I'm forced to either power cycle the Signalink or the radio to get control back. I undid all the settings in DM780 with no luck... WSJT-X Settings: Rig is set to HRD - PTT CAT - Front mic Audio is set to USB Audio Codec - both in and out Computer is running Win10 latest build Here are the last few lines of the WSJT-X sys log: [SYSLOG][2021-09-26 17:32:06.552550][00:00:00.000495][info] Log Start
[SYSLOG][2021-09-26 17:32:06.552550][00:00:00.000536][info] WSJT-X v2.4.0 c19d62 by K1JT, G4WJS, K9AN, and IV3NWV - Program startup
[SYSLOG][2021-09-26 17:32:06.568173][00:00:00.008288][info] locale: language: English script: Latin country: United States ui-languages: en-US
[SYSLOG][2021-09-26 17:32:06.568173][00:00:00.008487][info] Loaded Qt translations for current locale from resources
[SYSLOG][2021-09-26 17:32:06.568173][00:00:00.008528][info] Loaded WSJT-X base translation file from :/Translations based on language en
[SYSLOG][2021-09-26 17:32:06.568173][00:00:00.008556][info] Loaded WSJT-X translations for current locale from resources
[SYSLOG][2021-09-26 17:32:06.583797][00:00:00.026437][info] shmem size: 48275456
[RIGCTRL][2021-09-26 17:32:06.608812][00:00:00.048853][info] Hamlib version: Hamlib 4.2 Mon May 17 02:40:24 2021 +0000 SHA=cdad07
[RIGCTRL][2021-09-26 17:32:08.659423][00:00:02.100427][info] Id: Ham Radio DeluxeVersion: v6.7.0.357 b357
[SYSLOG][2021-09-26 17:32:29.392018][00:00:22.830634][warning] Detected dropped audio source samples: 1632 (0.034 S)
[SYSLOG][2021-09-26 17:32:59.381947][00:00:52.820661][warning] Detected dropped audio source samples: -816 (-0.017 S)
[RIGCTRL][2021-09-26 17:34:38.766626][00:02:32.204266][info] Id: Ham Radio DeluxeVersion: v6.7.0.357 b357
[SYSLOG][2021-09-26 17:35:44.396003][00:03:37.832980][warning] Detected dropped audio source samples: 720 (0.015 S)
[SYSLOG][2021-09-26 17:36:44.381305][00:04:37.817378][warning] Detected dropped audio source samples: -768 (-0.016 S)
[SYSLOG][2021-09-26 17:36:59.396695][00:04:52.832314][warning] Detected dropped audio source samples: 720 (0.015 S)
[SYSLOG][2021-09-26 17:37:44.396883][00:05:37.831761][warning] Detected dropped audio source samples: 576 (0.012 S)
[SYSLOG][2021-09-26 17:37:59.387130][00:05:52.821722][warning] Detected dropped audio source samples: -480 (-0.01 S)
[SYSLOG][2021-09-26 17:39:14.395950][00:07:07.830270][warning] Detected dropped audio source samples: 480 (0.01 S)
[SYSLOG][2021-09-26 17:41:14.379571][00:09:07.812241][warning] Detected dropped audio source samples: -768 (-0.016 S)
[SYSLOG][2021-09-26 17:43:14.381252][00:11:07.812650][warning] Detected dropped audio source samples: -816 (-0.017 S) Thanks so much - K7JGV
|
|
|
|
On 26/09/2021 18:48, John Vlahos via
groups.io wrote:
Any help would be greatly appreciated: Hi John, if you are using a SignaLink USB interface then you should be using "Settings->Radio->PTT Method->VOX". 73
|
|
|
|
John Vlahos
Bill – thanks I tried that and it appears to send the reply packet to a CQ, then fires the PTT again switch in a few short bursts and then I lose control of the app until reset the Signalink…
From: main@WSJTX.groups.io <main@WSJTX.groups.io>
On Behalf Of Bill Somerville
Sent: Sunday, September 26, 2021 2:10 PM To: main@WSJTX.groups.io Subject: Re: [WSJTX] Singalink USB w FT-890 - PTT Hang #ft-8 #Yaesu
On 26/09/2021 18:48, John Vlahos via groups.io wrote:
Hi John, if you are using a SignaLink USB interface then you should be using "Settings->Radio->PTT Method->VOX". 73
|
|
|
|
John,
you can't be "losing control of the
app", that makes no sense. The SignaLink USB handles PTT, all you
need do is ensure the Tx audio level is high enough to trigger
the SignaLink USB internal VOX circuit.
73
Bill G4WJS.
On 26/09/2021 22:23, John Vlahos via
groups.io wrote:
|
|
|
|
John Vlahos
Bill - sorry for missing the obvious. Raising the Tx gain worked..
John Vlahos (510) 415-1703m john@...
From: main@WSJTX.groups.io <main@WSJTX.groups.io> on behalf of Bill Somerville <g4wjs@...>
Sent: Sunday, September 26, 2021 2:32:24 PM To: main@WSJTX.groups.io <main@WSJTX.groups.io> Subject: Re: [WSJTX] Singalink USB w FT-890 - PTT Hang #ft-8 #Yaesu John,
you can't be "losing control of the app", that makes no sense. The SignaLink USB handles PTT, all you need do is ensure the Tx audio level is high enough to trigger the SignaLink USB internal VOX circuit.
73
Bill G4WJS. On 26/09/2021 22:23, John Vlahos via groups.io wrote:
|
|
|