Date
1 - 3 of 3
Locked WSJTX 2.3 refuses to TX in 50MHz #AudioIssues
|
On 16/05/2021 15:09, jmontsecal@... wrote:
Since I updated to 2.3, WSJTX does not send audio when transmiting in the 50MHz band (FT4 and FT8), nevertheless I can tune and the tuning signal is generated. Audio sources and levels seem to be OK. I can decode signals but when replying of making CQ, no audio gets out. All fine in the other bands. If I run version 2.22, with the same settings, there is no problem. By tte way, I also made a frequencies list reset, but nothing changes.Hi Josep Maria, what rig are you using and how is it connected to your PC for CAT and audio? 73 Bill G4WJS. |
|
|
|
Tom V. Segalstad
Hi Josep Maria
Is there a chance that your 50 MHz transmitting is causing RFI (Radio Frequency Interference) into your PC connecting cables and/or your computer?
Most og us have to wind the connecting cables on ferrite rings on each end of all the cables connecting the computer, in order to stop RFI. How have you made RFI shielding of your computer and all it's connections?
73 and good luck from Tom, LA4LN
Sent from Outlook Mobile
From: main@WSJTX.groups.io <main@WSJTX.groups.io> on behalf of jmontsecal@... <jmontsecal@...>
Sent: Sunday, May 16, 2021 4:09:41 PM To: main@WSJTX.groups.io <main@WSJTX.groups.io> Subject: [WSJTX] WSJTX 2.3 refuses to TX in 50MHz #AudioIssues Since I updated to 2.3, WSJTX does not send audio when transmiting in the 50MHz band (FT4 and FT8), nevertheless I can tune and the tuning signal is generated. Audio sources and levels seem to be OK. I can decode signals but when replying of making CQ,
no audio gets out. All fine in the other bands. If I run version 2.22, with the same settings, there is no problem. By tte way, I also made a frequencies list reset, but nothing changes.
Does version 2.3 hate me ? Any hint? Thanks, Josep Maria -- Tom (LA4LN) |
|
|
|
jmontsecal@...
Since I updated to 2.3, WSJTX does not send audio when transmiting in the 50MHz band (FT4 and FT8), nevertheless I can tune and the tuning signal is generated. Audio sources and levels seem to be OK. I can decode signals but when replying of making CQ, no audio gets out. All fine in the other bands. If I run version 2.22, with the same settings, there is no problem. By tte way, I also made a frequencies list reset, but nothing changes.
Does version 2.3 hate me ? Any hint? Thanks, Josep Maria |
|
|