1. WSJTX | Main
  2. Topics

Locked rc 3 and WSPR Band Hopping #BugReport #Cat_RigControl#Band hopping #IssueReport

Jon Mills
 

Hello

I still cannot get the WSPR band hopping to work ( SINCE 2.2.1). Set up is Win 10 20H2 Rx only with co-installed SDRUno using Kenwood TS480 for CAT interface via VSPE. Manual frequency change works in both directions, but WSJT-X is not issuing a frequency change instruction ( monitored using VSPE) just a series of FA;MD;IF;FA;MD;IF;FA;MD;IF;FA;MD;IF;FA;MD; instructions.  A manual change initiated from WSJT-X shows for example F;FA;MD;FA00007038600;ID;IF;MD
;IF;FA;MD;IF;FA;MD;IF;FA;MD;IF;FA;MD;. 

v 2.2.1 works ok, but I still cannot get this running on later versions, although it looks like others are not having issues.

Any ideas please.

73
JON
William Cullison
 

V2.2.2 crashes when using band hopping for me.

73s
Bill WA8VIH EL98


On Fri, Jan 8, 2021 at 11:30 AM Jon Mills <jon.mills@...> wrote:
Hello

I still cannot get the WSPR band hopping to work ( SINCE 2.2.1). Set up is Win 10 20H2 Rx only with co-installed SDRUno using Kenwood TS480 for CAT interface via VSPE. Manual frequency change works in both directions, but WSJT-X is not issuing a frequency change instruction ( monitored using VSPE) just a series of FA;MD;IF;FA;MD;IF;FA;MD;IF;FA;MD;IF;FA;MD; instructions.  A manual change initiated from WSJT-X shows for example F;FA;MD;FA00007038600;ID;IF;MD
;IF;FA;MD;IF;FA;MD;IF;FA;MD;IF;FA;MD;. 

v 2.2.1 works ok, but I still cannot get this running on later versions, although it looks like others are not having issues.

Any ideas please.

73
JON

1 - 2 of 2