|
HI All,
I am trying to help a blind lady ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working without a problem.
We are running into a problem with the signal link connection.
It seems that there is no audio coming through the signal link.
If there is anyone out there that is using the TS2000 with WSJT-X could
you forward me the all the appropriate menu settings in the TS2000.
The appropriate Audio In/Out are already set in WSJT-X.
We have menus 50b and 50c set to 8 and still no audio out and no
signals on the waterfall
If I switch audio in to the internal mike, WSJT-X does decode via the
audio from the radio speaker so I know that WSJT-X is working properly.
Any help would be appreciated
73,
|
|
|
Bill Somerville
On 05/09/2020 15:28, Sam Birnbaum via
groups.io wrote:
HI All,
I am
trying to help a blind lady ham in the UK connect her TS2000 to
WSJT-X.
I have CAT
control working without a problem.
We are
running into a problem with the signal link connection.
It seems
that there is no audio coming through the signal link.
If there
is anyone out there that is using the TS2000 with WSJT-X could
you
forward me the all the appropriate menu settings in the TS2000.
The
appropriate Audio In/Out are already set in WSJT-X.
We have
menus 50b and 50c set to 8 and still no audio out and no
signals on
the waterfall
If I
switch audio in to the internal mike, WSJT-X does decode via the
audio from
the radio speaker so I know that WSJT-X is working properly.
Any help
would be appreciated
73,
Hi Sam,
what do you have checked for "Settings->Radio->PTT Method"?
73
Bill
G4WJS.
|
|
|
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to VOX.
Was able to key the radio, but did not have any audio coming back.
I changed the radio to TS2000 and made sure that CAT was working.
Baud rate is set to 9600 which I believe is the correct setting for the SignalLink.
OI also tried setting Mode to USB then tried Data/Pkt, no audio.
A friend of mine had his TS2000 working with WSJT-X and signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked up so he can't check the settings.
There might be a problem in the cable connection to the TS2000 but there is no way that I can test for that on my end.
73,
-----Original Message-----
From: Bill Somerville <g4wjs@...>
To: main@WSJTX.groups.io
Cc: gena@... <gena@...>
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On 05/09/2020 15:28, Sam Birnbaum via
groups.io wrote:
HI All,
I am
trying to help a blind lady ham in the UK connect her TS2000 to
WSJT-X.
I have CAT
control working without a problem.
We are
running into a problem with the signal link connection.
It seems
that there is no audio coming through the signal link.
If there
is anyone out there that is using the TS2000 with WSJT-X could
you
forward me the all the appropriate menu settings in the TS2000.
The
appropriate Audio In/Out are already set in WSJT-X.
We have
menus 50b and 50c set to 8 and still no audio out and no
signals on
the waterfall
If I
switch audio in to the internal mike, WSJT-X does decode via the
audio from
the radio speaker so I know that WSJT-X is working properly.
Any help
would be appreciated
73,
Hi Sam,
what do you have checked for "Settings->Radio->PTT Method"?
73
Bill
G4WJS.
|
|
|
Bill Somerville
Hi Sam,
use VOX. The TS-2000 must be keyed via
the ACC socket to pick up audio from the same socket and mute the
mic input, let the SignaLink USB do the PTT. This assumes the
correct configuration board wiring is set up in the SignaLink USB.
73
Bill
G4WJS.
On 05/09/2020 15:57, Sam Birnbaum via
groups.io wrote:
toggle quoted messageShow quoted text
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to VOX.
Was able to key the radio, but did not have any audio coming
back.
I changed the radio to TS2000 and made sure that CAT was
working.
Baud rate is set to 9600 which I believe is the correct
setting for the SignalLink.
OI also tried setting Mode to USB then tried Data/Pkt, no
audio.
A friend of mine had his TS2000 working with WSJT-X and
signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked up so he
can't check the settings.
There might be a problem in the cable connection to the
TS2000 but there is no way that I can test for that on my end.
73,
-----Original Message-----
From: Bill Somerville <g4wjs@...>
To: main@WSJTX.groups.io
Cc: gena@... <gena@...>
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On 05/09/2020
15:28, Sam Birnbaum via groups.io wrote:
HI All,
I am trying to help a blind
lady ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working
without a problem.
We are running into a problem
with the signal link connection.
It seems that there is no audio
coming through the signal link.
If there is anyone out there
that is using the TS2000 with WSJT-X could
you forward me the all the
appropriate menu settings in the TS2000.
The appropriate Audio In/Out
are already set in WSJT-X.
We have menus 50b and 50c set
to 8 and still no audio out and no
signals on the waterfall
If I switch audio in to the
internal mike, WSJT-X does decode via the
audio from the radio speaker so
I know that WSJT-X is working properly.
Any help would be appreciated
73,
Hi Sam,
what do you have checked for
"Settings->Radio->PTT Method"?
73
Bill
G4WJS.
|
|
|
Hi Bill, Thanks. Will do when I get back back from the park.
-----Original Message----- From: Bill Somerville <g4wjs@...> To: main <main@WSJTX.groups.io> Sent: Sat, Sep 5, 2020 11:05 AM Subject: Re: [WSJTX] TS2000 and signal link problem
Hi Sam,
use VOX. The TS-2000 must be keyed via
the ACC socket to pick up audio from the same socket and mute the
mic input, let the SignaLink USB do the PTT. This assumes the
correct configuration board wiring is set up in the SignaLink USB.
73
Bill
G4WJS.
On 05/09/2020 15:57, Sam Birnbaum via
groups.io wrote:
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to VOX.
Was able to key the radio, but did not have any audio coming
back.
I changed the radio to TS2000 and made sure that CAT was
working.
Baud rate is set to 9600 which I believe is the correct
setting for the SignalLink.
OI also tried setting Mode to USB then tried Data/Pkt, no
audio.
A friend of mine had his TS2000 working with WSJT-X and
signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked up so he
can't check the settings.
There might be a problem in the cable connection to the
TS2000 but there is no way that I can test for that on my end.
73,
-----Original Message-----
From: Bill Somerville <g4wjs@...>
To: main@WSJTX.groups.io
Cc: gena@... <gena@...>
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On 05/09/2020
15:28, Sam Birnbaum via groups.io wrote:
HI All,
I am trying to help a blind
lady ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working
without a problem.
We are running into a problem
with the signal link connection.
It seems that there is no audio
coming through the signal link.
If there is anyone out there
that is using the TS2000 with WSJT-X could
you forward me the all the
appropriate menu settings in the TS2000.
The appropriate Audio In/Out
are already set in WSJT-X.
We have menus 50b and 50c set
to 8 and still no audio out and no
signals on the waterfall
If I switch audio in to the
internal mike, WSJT-X does decode via the
audio from the radio speaker so
I know that WSJT-X is working properly.
Any help would be appreciated
73,
Hi Sam,
what do you have checked for
"Settings->Radio->PTT Method"?
73
Bill
G4WJS.
|
|
|
Georgina Joyce <gena@...>
Hello,
Just to add, I have tried 3 different USB to SL leads, with the same result. I only have one SL-CAB-13K cable purchased from ML&S here in the UK a few weeks ago.
Thanks,
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to VOX.
Was able to key the radio, but did not have any audio coming back.
I changed the radio to TS2000 and made sure that CAT was working.
Baud rate is set to 9600 which I believe is the correct setting for the SignalLink.
OI also tried setting Mode to USB then tried Data/Pkt, no audio.
A friend of mine had his TS2000 working with WSJT-X and signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked up so he can't check the settings.
There might be a problem in the cable connection to the TS2000 but there is no way that I can test for that on my end.
73,
-----Original Message-----
From: Bill Somerville < g4wjs@...>
To: main@WSJTX.groups.io
Cc: gena@... < gena@...>
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On 05/09/2020 15:28, Sam Birnbaum via
groups.io wrote:
HI All,
I am
trying to help a blind lady ham in the UK connect her TS2000 to
WSJT-X.
I have CAT
control working without a problem.
We are
running into a problem with the signal link connection.
It seems
that there is no audio coming through the signal link.
If there
is anyone out there that is using the TS2000 with WSJT-X could
you
forward me the all the appropriate menu settings in the TS2000.
The
appropriate Audio In/Out are already set in WSJT-X.
We have
menus 50b and 50c set to 8 and still no audio out and no
signals on
the waterfall
If I
switch audio in to the internal mike, WSJT-X does decode via the
audio from
the radio speaker so I know that WSJT-X is working properly.
Any help
would be appreciated
73,
Hi Sam,
what do you have checked for "Settings->Radio->PTT Method"?
73
Bill
G4WJS.
Georgina
Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS
|
|
|
I only have one SL-CAB-13K cable purchased from ML&S here in the UK a
few weeks ago. Be careful with *any* cable with a 13 pin DIN connector (like ACC2 in Kenwood transceivers or the ACC jack on the "small" Icoms). It is possible to connect the 13 pin DIN plug "upside down" (rotated 180 degrees). When that happens, the expected connections are not made - PTT via the ACC2 jack, audio in/audio out, etc. will not work! Check the ACC2 plug (DIN13) carefully before connecting it. The TS-2000 ACC2 jack has its keyway at the *bottom* of the rig with pin 13 as the lone pin on the top row of the plug/connector. Because the key in the plug often does not extend to the very edge of the shell, it it possible to insert the plug into the socket such that pin 13 enters the keyway and pins 1-12 of the plug connect (backward) to pins 12-1 of the socket. 73, ... Joe, W4TV On 2020-09-05 12:51 PM, Georgina Joyce wrote: Hello,
Just to add, I have tried 3 different USB to SL leads, with the same result. I only have one SL-CAB-13K cable purchased from ML&S here in the UK a few weeks ago.
Thanks,
On 5 Sep 2020, at 15:57, Sam Birnbaum via groups.io <w2jdb@...> wrote:
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to VOX.
Was able to key the radio, but did not have any audio coming back.
I changed the radio to TS2000 and made sure that CAT was working.
Baud rate is set to 9600 which I believe is the correct setting for the SignalLink.
OI also tried setting Mode to USB then tried Data/Pkt, no audio.
A friend of mine had his TS2000 working with WSJT-X and signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked up so he can't check the settings.
There might be a problem in the cable connection to the TS2000 but there is no way that I can test for that on my end.
73,
Sam W2JDB
-----Original Message-----
From: Bill Somerville <g4wjs@...>
To: main@WSJTX.groups.io
Cc: gena@... <gena@...>
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On 05/09/2020 15:28, Sam Birnbaum via groups.io wrote:
HI All,
I am trying to help a blind lady ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working without a problem.
We are running into a problem with the signal link connection.
It seems that there is no audio coming through the signal link.
If there is anyone out there that is using the TS2000 with WSJT-X could
you forward me the all the appropriate menu settings in the TS2000.
The appropriate Audio In/Out are already set in WSJT-X.
We have menus 50b and 50c set to 8 and still no audio out and no
signals on the waterfall
If I switch audio in to the internal mike, WSJT-X does decode via the
audio from the radio speaker so I know that WSJT-X is working properly.
Any help would be appreciated
73,
Sam W2JDB
Hi Sam,
what do you have checked for "Settings->Radio->PTT Method"?
73
Bill
G4WJS.
Georgina
Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS
|
|
|
Sam-
the Signalink is not a CAT device, therefore it does not have a baud rate.
it is an audio card, with a PTT for transmit, and as Bill has said, use VOX.
It does have a monitor output on rear which can be monitored for proper audio out of the signalink with a headset.
Dan KC2STA
On Sat, Sep 5, 2020 at 1:52 PM Joe Subich, W4TV < lists@...> wrote:
> I only have one SL-CAB-13K cable purchased from ML&S here in the UK a
> few weeks ago.
Be careful with *any* cable with a 13 pin DIN connector (like ACC2
in Kenwood transceivers or the ACC jack on the "small" Icoms). It
is possible to connect the 13 pin DIN plug "upside down" (rotated
180 degrees). When that happens, the expected connections are not
made - PTT via the ACC2 jack, audio in/audio out, etc. will not
work!
Check the ACC2 plug (DIN13) carefully before connecting it. The TS-2000
ACC2 jack has its keyway at the *bottom* of the rig with pin 13 as the
lone pin on the top row of the plug/connector. Because the key in the
plug often does not extend to the very edge of the shell, it it possible
to insert the plug into the socket such that pin 13 enters the keyway
and pins 1-12 of the plug connect (backward) to pins 12-1 of the socket.
73,
... Joe, W4TV
On 2020-09-05 12:51 PM, Georgina Joyce wrote:
> Hello,
>
>
> Just to add, I have tried 3 different USB to SL leads, with the same result. I only have one SL-CAB-13K cable purchased from ML&S here in the UK a few weeks ago.
>
> Thanks,
>
>> On 5 Sep 2020, at 15:57, Sam Birnbaum via groups.io <w2jdb=aol.com@groups.io> wrote:
>>
>> Hi Bill,
>>
>> PTT is Cat and is working properly.
>> Initially she the radio settings to none and PTT to VOX.
>> Was able to key the radio, but did not have any audio coming back.
>> I changed the radio to TS2000 and made sure that CAT was working.
>>
>> Baud rate is set to 9600 which I believe is the correct setting for the SignalLink.
>>
>> OI also tried setting Mode to USB then tried Data/Pkt, no audio.
>>
>> A friend of mine had his TS2000 working with WSJT-X and signallink so I know that it should work
>> Unfortunately , he no longer has the TS2000 hooked up so he can't check the settings.
>>
>> There might be a problem in the cable connection to the TS2000 but there is no way that I can test for that on my end.
>>
>> 73,
>>
>> Sam W2JDB
>>
>>
>>
>> -----Original Message-----
>> From: Bill Somerville <g4wjs@...>
>> To: main@WSJTX.groups.io
>> Cc: gena@... <gena@...>
>> Sent: Sat, Sep 5, 2020 10:40 am
>> Subject: Re: [WSJTX] TS2000 and signal link problem
>>
>> On 05/09/2020 15:28, Sam Birnbaum via groups.io wrote:
>>> HI All,
>>>
>>> I am trying to help a blind lady ham in the UK connect her TS2000 to WSJT-X.
>>> I have CAT control working without a problem.
>>>
>>> We are running into a problem with the signal link connection.
>>> It seems that there is no audio coming through the signal link.
>>> If there is anyone out there that is using the TS2000 with WSJT-X could
>>> you forward me the all the appropriate menu settings in the TS2000.
>>>
>>> The appropriate Audio In/Out are already set in WSJT-X.
>>>
>>> We have menus 50b and 50c set to 8 and still no audio out and no
>>> signals on the waterfall
>>>
>>> If I switch audio in to the internal mike, WSJT-X does decode via the
>>> audio from the radio speaker so I know that WSJT-X is working properly.
>>>
>>> Any help would be appreciated
>>>
>>> 73,
>>>
>>> Sam W2JDB
>>>
>>
>> Hi Sam,
>> what do you have checked for "Settings->Radio->PTT Method"?
>> 73
>> Bill
>> G4WJS.
>>
>
> Georgina
>
>
> Call: M0EBP
> DMR ID: 2346259
> Allstar: 52178
> Locater: IO83PS
>
>
-- Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
|
|
|
Hi Dan,
Thanks for the information. I will follow up with Georgina and set PTT to VOX and see what happens.
AS I mentioned in my previous email, before I setup CAT control, it was set to VOX and there was no audio out from the TS2000 through the Signallink. I will check again.
Thankyou all for the replies and information. I will certainly let the group know if we were successful.
73,
-----Original Message-----
From: d_ziolkowski <dan.ziolkowski@...>
To: main@wsjtx.groups.io
Sent: Sat, Sep 5, 2020 2:24 pm
Subject: Re: [WSJTX] TS2000 and signal link problem
Sam-
the Signalink is not a CAT device, therefore it does not have a baud rate.
it is an audio card, with a PTT for transmit, and as Bill has said, use VOX.
It does have a monitor output on rear which can be monitored for proper audio out of the signalink with a headset.
Dan KC2STA
On Sat, Sep 5, 2020 at 1:52 PM Joe Subich, W4TV < lists@...> wrote:
> I only have one SL-CAB-13K cable purchased from ML&S here in the UK a
> few weeks ago.
Be careful with *any* cable with a 13 pin DIN connector (like ACC2
in Kenwood transceivers or the ACC jack on the "small" Icoms). It
is possible to connect the 13 pin DIN plug "upside down" (rotated
180 degrees). When that happens, the expected connections are not
made - PTT via the ACC2 jack, audio in/audio out, etc. will not
work!
Check the ACC2 plug (DIN13) carefully before connecting it. The TS-2000
ACC2 jack has its keyway at the *bottom* of the rig with pin 13 as the
lone pin on the top row of the plug/connector. Because the key in the
plug often does not extend to the very edge of the shell, it it possible
to insert the plug into the socket such that pin 13 enters the keyway
and pins 1-12 of the plug connect (backward) to pins 12-1 of the socket.
73,
... Joe, W4TV
On 2020-09-05 12:51 PM, Georgina Joyce wrote:
> Hello,
>
>
> Just to add, I have tried 3 different USB to SL leads, with the same result. I only have one SL-CAB-13K cable purchased from ML&S here in the UK a few weeks ago.
>
> Thanks,
>
>> On 5 Sep 2020, at 15:57, Sam Birnbaum via groups.io <w2jdb=aol.com@groups.io> wrote:
>>
>> Hi Bill,
>>
>> PTT is Cat and is working properly.
>> Initially she the radio settings to none and PTT to VOX.
>> Was able to key the radio, but did not have any audio coming back.
>> I changed the radio to TS2000 and made sure that CAT was working.
>>
>> Baud rate is set to 9600 which I believe is the correct setting for the SignalLink.
>>
>> OI also tried setting Mode to USB then tried Data/Pkt, no audio.
>>
>> A friend of mine had his TS2000 working with WSJT-X and signallink so I know that it should work
>> Unfortunately , he no longer has the TS2000 hooked up so he can't check the settings.
>>
>> There might be a problem in the cable connection to the TS2000 but there is no way that I can test for that on my end.
>>
>> 73,
>>
>> Sam W2JDB
>>
>>
>>
>> -----Original Message-----
>> From: Bill Somerville <g4wjs@...>
>> To: main@WSJTX.groups.io
>> Cc: gena@... <gena@...>
>> Sent: Sat, Sep 5, 2020 10:40 am
>> Subject: Re: [WSJTX] TS2000 and signal link problem
>>
>> On 05/09/2020 15:28, Sam Birnbaum via groups.io wrote:
>>> HI All,
>>>
>>> I am trying to help a blind lady ham in the UK connect her TS2000 to WSJT-X.
>>> I have CAT control working without a problem.
>>>
>>> We are running into a problem with the signal link connection.
>>> It seems that there is no audio coming through the signal link.
>>> If there is anyone out there that is using the TS2000 with WSJT-X could
>>> you forward me the all the appropriate menu settings in the TS2000.
>>>
>>> The appropriate Audio In/Out are already set in WSJT-X.
>>>
>>> We have menus 50b and 50c set to 8 and still no audio out and no
>>> signals on the waterfall
>>>
>>> If I switch audio in to the internal mike, WSJT-X does decode via the
>>> audio from the radio speaker so I know that WSJT-X is working properly.
>>>
>>> Any help would be appreciated
>>>
>>> 73,
>>>
>>> Sam W2JDB
>>>
>>
>> Hi Sam,
>> what do you have checked for "Settings->Radio->PTT Method"?
>> 73
>> Bill
>> G4WJS.
>>
>
> Georgina
>
>
> Call: M0EBP
> DMR ID: 2346259
> Allstar: 52178
> Locater: IO83PS
>
>
--
Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
|
|
|
Karl Beckman WA8NVW - NNV5BH
Georgina and Sam - For the TS2000 the radio PTT setting in WSJT MUST be VOX because normal CAT PTT always mutes the ACC2 audio. Set the WSJTx software CAT baud rate to match the radio in Menu 56. I run 57.6 kbps here for all ham software apps that talk CAT to the TS-2000, but 38.4 kbps works OK also, but 19.2 and below are too slow for some logging apps. Menus 20 and 21 should both be OFF to get flat audio response. Menu 22 Tx DSP bandwidth should be set for 3.0 kHz. The front panel controls for receiver DSP should be set for Low rolloff at 200 Hz and High rolloff at 3 kHz. Not ideal for voice, but great for WSJT. I also set Menu 13 Tx Monitor level to 1 so I can hear the Tx Audio tone is getting to the radio. If/when it annoys you, there's a dedicated button round he tuning dial to turn it on or off. Menus 50A and 50B default levels for the ACC2 connector audio are OK. Don't change those if you also run packet. In tune or transmit if you DON'T see the SL-USB's red PTT indicator light up, your setting of the Playback Audio Level control in Windows or slider at the right side of WSJT is too low to activate the VOX circuit inside the SL-USB. If you DO see the red led but you still have no or very low transmit power output, you have not enough audio coming out of the SL-USB. The transmit level knob on mine is between 9 and 10 o'clock to get one or two pips on the ALC meter. And to make life in 2020 even more interesting, I discovered that the jumper socket inside my SL-USB was slightly imtermittent, so the Tx audio didn't always get to the radio cable. Hope this helps, and happy hamming! -- Karl WA8NVW OH WA8NVW@...in WSJTX@groups.io
|
|
|
Hi Karl,
Thanks you for the info. Georgina is blind.
We just reset it to VOX and still no audio coming through.
Menu items 50b and 50c are set to 8 I don't know what 20 or 21 are set to.
I asked Georgina to shut down the rig and signallink and reset the plug making sure the key is at the bottom.
Until I see audio coming in through the signal link, I will not attempt to transmit.
Thank you for the info.
73,
-----Original Message-----
From: Karl Beckman <wa8nvw@...>
To: main@WSJTX.groups.io
Sent: Sat, Sep 5, 2020 3:52 pm
Subject: Re: [WSJTX] TS2000 and signal link problem
Georgina and Sam - For the TS2000 the radio PTT setting in WSJT MUST be VOX because normal CAT PTT always mutes the ACC2 audio. Set the WSJTx software CAT baud rate to match the radio in Menu 56. I run 57.6 kbps here for all ham software apps that talk CAT to the TS-2000, but 38.4 kbps works OK also, but 19.2 and below are too slow for some logging apps. Menus 20 and 21 should both be OFF to get flat audio response. Menu 22 Tx DSP bandwidth should be set for 3.0 kHz. The front panel controls for receiver DSP should be set for Low rolloff at 200 Hz and High rolloff at 3 kHz. Not ideal for voice, but great for WSJT. I also set Menu 13 Tx Monitor level to 1 so I can hear the Tx Audio tone is getting to the radio. If/when it annoys you, there's a dedicated button round he tuning dial to turn it on or off. Menus 50A and 50B default levels for the ACC2 connector audio are OK. Don't change those if you also run packet. In tune or transmit if you DON'T see the SL-USB's red PTT indicator light up, your setting of the Playback Audio Level control in Windows or slider at the right side of WSJT is too low to activate the VOX circuit inside the SL-USB. If you DO see the red led but you still have no or very low transmit power output, you have not enough audio coming out of the SL-USB. The transmit level knob on mine is between 9 and 10 o'clock to get one or two pips on the ALC meter. And to make life in 2020 even more interesting, I discovered that the jumper socket inside my SL-USB was slightly imtermittent, so the Tx audio didn't always get to the radio cable. Hope this helps, and happy hamming! -- Karl WA8NVW OH WA8NVW@...
in WSJTX@groups.io
|
|
|
Hi Bill,
Well, tried it all. No audio coming through the signallink.
Could be a problem with the signallink, which se is sending back to where she purchased it for a check,
or worse, they might be a problem with the TS2000 which she purchased used.
Thanks you all for your help in this matter.
73,
-----Original Message-----
From: Bill Somerville <g4wjs@...>
To: main@WSJTX.groups.io
Sent: Sat, Sep 5, 2020 11:05 am
Subject: Re: [WSJTX] TS2000 and signal link problem
Hi Sam,
use VOX. The TS-2000 must be keyed via
the ACC socket to pick up audio from the same socket and mute the
mic input, let the SignaLink USB do the PTT. This assumes the
correct configuration board wiring is set up in the SignaLink USB.
73
Bill
G4WJS.
On 05/09/2020 15:57, Sam Birnbaum via
groups.io wrote:
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to VOX.
Was able to key the radio, but did not have any audio coming
back.
I changed the radio to TS2000 and made sure that CAT was
working.
Baud rate is set to 9600 which I believe is the correct
setting for the SignalLink.
OI also tried setting Mode to USB then tried Data/Pkt, no
audio.
A friend of mine had his TS2000 working with WSJT-X and
signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked up so he
can't check the settings.
There might be a problem in the cable connection to the
TS2000 but there is no way that I can test for that on my end.
73,
-----Original Message-----
From: Bill Somerville mailto:g4wjs@...
To: main@WSJTX.groups.io
Cc: gena@... mailto:gena@...
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On 05/09/2020
15:28, Sam Birnbaum via groups.io wrote:
HI All,
I am trying to help a blind
lady ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working
without a problem.
We are running into a problem
with the signal link connection.
It seems that there is no audio
coming through the signal link.
If there is anyone out there
that is using the TS2000 with WSJT-X could
you forward me the all the
appropriate menu settings in the TS2000.
The appropriate Audio In/Out
are already set in WSJT-X.
We have menus 50b and 50c set
to 8 and still no audio out and no
signals on the waterfall
If I switch audio in to the
internal mike, WSJT-X does decode via the
audio from the radio speaker so
I know that WSJT-X is working properly.
Any help would be appreciated
73,
Hi Sam,
what do you have checked for
"Settings->Radio->PTT Method"?
73
Bill
G4WJS.
|
|
|
Bill Somerville
Hi Sam,
have you checked the Tx audio setting
recipe in this pinned post:
https://wsjtx.groups.io/g/main/topic/setting_windows_wsjt_x_tx/75435187?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,75435187
73
Bill
G4WJS.
On 05/09/2020 21:32, Sam Birnbaum via
groups.io wrote:
toggle quoted messageShow quoted text
Hi Bill,
Well, tried it all. No audio coming through the signallink.
Could be a problem with the signallink, which se is sending
back to where she purchased it for a check,
or worse, they might be a problem with the TS2000 which she
purchased used.
Thanks you all for your help in this matter.
73,
-----Original Message-----
From: Bill Somerville <g4wjs@...>
To: main@WSJTX.groups.io
Sent: Sat, Sep 5, 2020 11:05 am
Subject: Re: [WSJTX] TS2000 and signal link problem
Hi Sam,
use VOX. The
TS-2000 must be keyed via the ACC socket to pick up audio
from the same socket and mute the mic input, let the
SignaLink USB do the PTT. This assumes the correct
configuration board wiring is set up in the SignaLink USB.
73
Bill
G4WJS.
On 05/09/2020
15:57, Sam Birnbaum via groups.io wrote:
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to
VOX.
Was able to key the radio, but did not have any
audio coming back.
I changed the radio to TS2000 and made sure that
CAT was working.
Baud rate is set to 9600 which I believe is the
correct setting for the SignalLink.
OI also tried setting Mode to USB then tried
Data/Pkt, no audio.
A friend of mine had his TS2000 working with WSJT-X
and signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked
up so he can't check the settings.
There might be a problem in the cable connection to
the TS2000 but there is no way that I can test for
that on my end.
73,
-----Original Message-----
From: Bill Somerville mailto:g4wjs@...
To: main@WSJTX.groups.io
Cc: gena@... mailto:gena@...
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On
05/09/2020 15:28, Sam Birnbaum via groups.io
wrote:
HI All,
I am trying to help a blind lady
ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working without
a problem.
We are running into a problem with
the signal link connection.
It seems that there is no audio
coming through the signal link.
If there is anyone out there
that is using the TS2000 with WSJT-X could
you forward me the all the
appropriate menu settings in the TS2000.
The appropriate Audio In/Out are
already set in WSJT-X.
We have menus 50b and 50c set to 8
and still no audio out and no
signals on the waterfall
If I switch audio in to the
internal mike, WSJT-X does decode via the
audio from the radio speaker so I
know that WSJT-X is working properly.
Any help would be appreciated
73,
Hi Sam,
what do you have checked for
"Settings->Radio->PTT Method"?
73
Bill
G4WJS.
|
|
|
Georgina Joyce <gena@...>
Hello, Thanks, that has been checked. PPT works through the 13 pin ACC2 port. I know what I am doing with such plugs, thank you. 73 On 5 Sep 2020, at 18:52, Joe Subich, W4TV <lists@...> wrote:
I only have one SL-CAB-13K cable purchased from ML&S here in the UK a
few weeks ago. Be careful with *any* cable with a 13 pin DIN connector (like ACC2
in Kenwood transceivers or the ACC jack on the "small" Icoms). It
is possible to connect the 13 pin DIN plug "upside down" (rotated
180 degrees). When that happens, the expected connections are not
made - PTT via the ACC2 jack, audio in/audio out, etc. will not
work!
Check the ACC2 plug (DIN13) carefully before connecting it. The TS-2000
ACC2 jack has its keyway at the *bottom* of the rig with pin 13 as the
lone pin on the top row of the plug/connector. Because the key in the
plug often does not extend to the very edge of the shell, it it possible
to insert the plug into the socket such that pin 13 enters the keyway
and pins 1-12 of the plug connect (backward) to pins 12-1 of the socket.
73,
... Joe, W4TV
On 2020-09-05 12:51 PM, Georgina Joyce wrote:
Hello,
Just to add, I have tried 3 different USB to SL leads, with the same result. I only have one SL-CAB-13K cable purchased from ML&S here in the UK a few weeks ago.
Thanks,
On 5 Sep 2020, at 15:57, Sam Birnbaum via groups.io <w2jdb@...> wrote:
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to VOX.
Was able to key the radio, but did not have any audio coming back.
I changed the radio to TS2000 and made sure that CAT was working.
Baud rate is set to 9600 which I believe is the correct setting for the SignalLink.
OI also tried setting Mode to USB then tried Data/Pkt, no audio.
A friend of mine had his TS2000 working with WSJT-X and signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked up so he can't check the settings.
There might be a problem in the cable connection to the TS2000 but there is no way that I can test for that on my end.
73,
Sam W2JDB
-----Original Message-----
From: Bill Somerville <g4wjs@...>
To: main@WSJTX.groups.io
Cc: gena@... <gena@...>
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On 05/09/2020 15:28, Sam Birnbaum via groups.io wrote:
HI All,
I am trying to help a blind lady ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working without a problem.
We are running into a problem with the signal link connection.
It seems that there is no audio coming through the signal link.
If there is anyone out there that is using the TS2000 with WSJT-X could
you forward me the all the appropriate menu settings in the TS2000.
The appropriate Audio In/Out are already set in WSJT-X.
We have menus 50b and 50c set to 8 and still no audio out and no
signals on the waterfall
If I switch audio in to the internal mike, WSJT-X does decode via the
audio from the radio speaker so I know that WSJT-X is working properly.
Any help would be appreciated
73,
Sam W2JDB
Hi Sam,
what do you have checked for "Settings->Radio->PTT Method"?
73
Bill
G4WJS.
Georgina
Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS Georgina Call: M0EBP DMR ID: 2346259 Allstar: 52178 Locater: IO83PS
|
|
|
Hi Bill,
That was on of the first items that I checked.
After I hung with her, I sent her another email suggesting a full reset on the TS2000.
Since she purchased it used, who knows what might have happened to the firmware.
Once she does a full reset, we will do another test. Maybe tomorrow.
I don't give up that easily.
73,
-----Original Message-----
From: Bill Somerville <g4wjs@...>
To: main@WSJTX.groups.io
Sent: Sat, Sep 5, 2020 4:34 pm
Subject: Re: [WSJTX] TS2000 and signal link problem
Hi Sam,
have you checked the Tx audio setting
recipe in this pinned post:
https://wsjtx.groups.io/g/main/topic/setting_windows_wsjt_x_tx/75435187?p=,,,20,0,0,0::recentpostdate%252Fsticky,,,20,2,0,75435187
73
Bill
G4WJS.
On 05/09/2020 21:32, Sam Birnbaum via
groups.io wrote:
Hi Bill,
Well, tried it all. No audio coming through the signallink.
Could be a problem with the signallink, which se is sending
back to where she purchased it for a check,
or worse, they might be a problem with the TS2000 which she
purchased used.
Thanks you all for your help in this matter.
73,
-----Original Message-----
From: Bill Somerville mailto:g4wjs@...
To: main@WSJTX.groups.io
Sent: Sat, Sep 5, 2020 11:05 am
Subject: Re: [WSJTX] TS2000 and signal link problem
Hi Sam,
use VOX. The
TS-2000 must be keyed via the ACC socket to pick up audio
from the same socket and mute the mic input, let the
SignaLink USB do the PTT. This assumes the correct
configuration board wiring is set up in the SignaLink USB.
73
Bill
G4WJS.
On 05/09/2020
15:57, Sam Birnbaum via groups.io wrote:
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to
VOX.
Was able to key the radio, but did not have any
audio coming back.
I changed the radio to TS2000 and made sure that
CAT was working.
Baud rate is set to 9600 which I believe is the
correct setting for the SignalLink.
OI also tried setting Mode to USB then tried
Data/Pkt, no audio.
A friend of mine had his TS2000 working with WSJT-X
and signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked
up so he can't check the settings.
There might be a problem in the cable connection to
the TS2000 but there is no way that I can test for
that on my end.
73,
-----Original Message-----
From: Bill Somerville mailto:g4wjs@...
To: main@WSJTX.groups.io
Cc: gena@... mailto:gena@...
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On
05/09/2020 15:28, Sam Birnbaum via groups.io
wrote:
HI All,
I am trying to help a blind lady
ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working without
a problem.
We are running into a problem with
the signal link connection.
It seems that there is no audio
coming through the signal link.
If there is anyone out there
that is using the TS2000 with WSJT-X could
you forward me the all the
appropriate menu settings in the TS2000.
The appropriate Audio In/Out are
already set in WSJT-X.
We have menus 50b and 50c set to 8
and still no audio out and no
signals on the waterfall
If I switch audio in to the
internal mike, WSJT-X does decode via the
audio from the radio speaker so I
know that WSJT-X is working properly.
Any help would be appreciated
73,
Hi Sam,
what do you have checked for
"Settings->Radio->PTT Method"?
73
Bill
G4WJS.
|
|
|
Georgina Joyce <gena@...>
Hello, The front panel controls for receiver DSP should be set for Low rolloff at 200 Hz and High rolloff at 3 kHz. Not ideal for voice, but great for WSJT.
These are the controls below the keypad? These controls do not give speech feedback. I can get a sighted agent to look on the screen. But I need to be able to describe exactly what I want them to look at. Some of these agents are terrified of these strange devices. Is it possible to change these controls in a way that totally stops any signals being shown on the waterfall? i.e. Is this a fine tuning requirement and does not stop audio showing on the waterfall?
Thanks, I also set Menu 13 Tx Monitor level to 1 so I can hear the Tx Audio tone is getting to the radio. If/when it annoys you, there's a dedicated button round he tuning dial to turn it on or off. Menus 50A and 50B default levels for the ACC2 connector audio are OK. Don't change those if you also run packet. In tune or transmit if you DON'T see the SL-USB's red PTT indicator light up, your setting of the Playback Audio Level control in Windows or slider at the right side of WSJT is too low to activate the VOX circuit inside the SL-USB. If you DO see the red led but you still have no or very low transmit power output, you have not enough audio coming out of the SL-USB. The transmit level knob on mine is between 9 and 10 o'clock to get one or two pips on the ALC meter. And to make life in 2020 even more interesting, I discovered that the jumper socket inside my SL-USB was slightly imtermittent, so the Tx audio didn't always get to the radio cable. Hope this helps, and happy hamming! -- Karl WA8NVW OH WA8NVW@...in WSJTX@groups.io
Georgina
Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS
|
|
|
Georgina Joyce <gena@...>
Hello,
Regrettably, I did a reset on Friday because a repeater on UHF stopped being activated and I tried to reset the tone and checked the split. Couldn't work out what was going wrong so I looked in the manual and pressed the A+B key while turning it on. Which is a full reset. I have no problem doing it again, but it will not make any difference.
Last year, I sent it to ML&S who repaired the sub volume knob that was damaged. I asked them to flash the firmware to the latest version while it was on the bench. So again that caused a reset so no setting from previous owner remain. Many thanks,
Hi Bill,
That was on of the first items that I checked.
After I hung with her, I sent her another email suggesting a full reset on the TS2000.
Since she purchased it used, who knows what might have happened to the firmware.
Once she does a full reset, we will do another test. Maybe tomorrow.
I don't give up that easily.
73,
-----Original Message-----
From: Bill Somerville < g4wjs@...>
To: main@WSJTX.groups.io
Sent: Sat, Sep 5, 2020 4:34 pm
Subject: Re: [WSJTX] TS2000 and signal link problem
Hi Sam,
have you checked the Tx audio setting
recipe in this pinned post:
https://wsjtx.groups.io/g/main/topic/setting_windows_wsjt_x_tx/75435187?p=,,,20,0,0,0::recentpostdate%252Fsticky,,,20,2,0,75435187
73
Bill
G4WJS.
On 05/09/2020 21:32, Sam Birnbaum via
groups.io wrote:
Hi Bill,
Well, tried it all. No audio coming through the signallink.
Could be a problem with the signallink, which se is sending
back to where she purchased it for a check,
or worse, they might be a problem with the TS2000 which she
purchased used.
Thanks you all for your help in this matter.
73,
-----Original Message-----
From: Bill Somerville mailto:g4wjs@...
To: main@WSJTX.groups.io
Sent: Sat, Sep 5, 2020 11:05 am
Subject: Re: [WSJTX] TS2000 and signal link problem
Hi Sam,
use VOX. The
TS-2000 must be keyed via the ACC socket to pick up audio
from the same socket and mute the mic input, let the
SignaLink USB do the PTT. This assumes the correct
configuration board wiring is set up in the SignaLink USB.
73
Bill
G4WJS.
On 05/09/2020
15:57, Sam Birnbaum via groups.io wrote:
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to
VOX.
Was able to key the radio, but did not have any
audio coming back.
I changed the radio to TS2000 and made sure that
CAT was working.
Baud rate is set to 9600 which I believe is the
correct setting for the SignalLink.
OI also tried setting Mode to USB then tried
Data/Pkt, no audio.
A friend of mine had his TS2000 working with WSJT-X
and signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked
up so he can't check the settings.
There might be a problem in the cable connection to
the TS2000 but there is no way that I can test for
that on my end.
73,
-----Original Message-----
From: Bill Somerville mailto:g4wjs@...
To: main@WSJTX.groups.io
Cc: gena@... mailto:gena@...
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On
05/09/2020 15:28, Sam Birnbaum via groups.io
wrote:
HI All,
I am trying to help a blind lady
ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working without
a problem.
We are running into a problem with
the signal link connection.
It seems that there is no audio
coming through the signal link.
If there is anyone out there
that is using the TS2000 with WSJT-X could
you forward me the all the
appropriate menu settings in the TS2000.
The appropriate Audio In/Out are
already set in WSJT-X.
We have menus 50b and 50c set to 8
and still no audio out and no
signals on the waterfall
If I switch audio in to the
internal mike, WSJT-X does decode via the
audio from the radio speaker so I
know that WSJT-X is working properly.
Any help would be appreciated
73,
Hi Sam,
what do you have checked for
"Settings->Radio->PTT Method"?
73
Bill
G4WJS.
Georgina
Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS
|
|
|
Sam-
have the jumpers inside the signalink been set up for the TS2000?
You need to do that or you can buy a plug in module for that rig.
This properly routes the audio from and to the radio.
Dan KC2STA
Hi Bill,
Well, tried it all. No audio coming through the signallink.
Could be a problem with the signallink, which se is sending back to where she purchased it for a check,
or worse, they might be a problem with the TS2000 which she purchased used.
Thanks you all for your help in this matter.
73,
-----Original Message-----
From: Bill Somerville < g4wjs@...>
To: main@WSJTX.groups.io
Sent: Sat, Sep 5, 2020 11:05 am
Subject: Re: [WSJTX] TS2000 and signal link problem
Hi Sam,
use VOX. The TS-2000 must be keyed via
the ACC socket to pick up audio from the same socket and mute the
mic input, let the SignaLink USB do the PTT. This assumes the
correct configuration board wiring is set up in the SignaLink USB.
73
Bill
G4WJS.
On 05/09/2020 15:57, Sam Birnbaum via
groups.io wrote:
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to VOX.
Was able to key the radio, but did not have any audio coming
back.
I changed the radio to TS2000 and made sure that CAT was
working.
Baud rate is set to 9600 which I believe is the correct
setting for the SignalLink.
OI also tried setting Mode to USB then tried Data/Pkt, no
audio.
A friend of mine had his TS2000 working with WSJT-X and
signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked up so he
can't check the settings.
There might be a problem in the cable connection to the
TS2000 but there is no way that I can test for that on my end.
73,
-----Original Message-----
From: Bill Somerville mailto:g4wjs@...
To: main@WSJTX.groups.io
Cc: gena@... mailto:gena@...
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On 05/09/2020
15:28, Sam Birnbaum via groups.io wrote:
HI All,
I am trying to help a blind
lady ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working
without a problem.
We are running into a problem
with the signal link connection.
It seems that there is no audio
coming through the signal link.
If there is anyone out there
that is using the TS2000 with WSJT-X could
you forward me the all the
appropriate menu settings in the TS2000.
The appropriate Audio In/Out
are already set in WSJT-X.
We have menus 50b and 50c set
to 8 and still no audio out and no
signals on the waterfall
If I switch audio in to the
internal mike, WSJT-X does decode via the
audio from the radio speaker so
I know that WSJT-X is working properly.
Any help would be appreciated
73,
Hi Sam,
what do you have checked for
"Settings->Radio->PTT Method"?
73
Bill
G4WJS.
-- Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
|
|
|
Georgina Joyce <gena@...>
Hello,
Tigertronics do indeed sell a plug n play module which I purchased knowing that I would have problems attaching small bits of wire. I have had 2 sighted people check that it is in the right way around and seated properly.
Thanks,
Sam-
have the jumpers inside the signalink been set up for the TS2000?
You need to do that or you can buy a plug in module for that rig.
This properly routes the audio from and to the radio.
Dan KC2STA
Hi Bill,
Well, tried it all. No audio coming through the signallink.
Could be a problem with the signallink, which se is sending back to where she purchased it for a check,
or worse, they might be a problem with the TS2000 which she purchased used.
Thanks you all for your help in this matter.
73,
-----Original Message-----
From: Bill Somerville < g4wjs@...>
To: main@WSJTX.groups.io
Sent: Sat, Sep 5, 2020 11:05 am
Subject: Re: [WSJTX] TS2000 and signal link problem
Hi Sam,
use VOX. The TS-2000 must be keyed via
the ACC socket to pick up audio from the same socket and mute the
mic input, let the SignaLink USB do the PTT. This assumes the
correct configuration board wiring is set up in the SignaLink USB.
73
Bill
G4WJS.
On 05/09/2020 15:57, Sam Birnbaum via
groups.io wrote:
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to VOX.
Was able to key the radio, but did not have any audio coming
back.
I changed the radio to TS2000 and made sure that CAT was
working.
Baud rate is set to 9600 which I believe is the correct
setting for the SignalLink.
OI also tried setting Mode to USB then tried Data/Pkt, no
audio.
A friend of mine had his TS2000 working with WSJT-X and
signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked up so he
can't check the settings.
There might be a problem in the cable connection to the
TS2000 but there is no way that I can test for that on my end.
73,
-----Original Message-----
From: Bill Somerville mailto:g4wjs@...
To: main@WSJTX.groups.io
Cc: gena@... mailto:gena@...
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On 05/09/2020
15:28, Sam Birnbaum via groups.io wrote:
HI All,
I am trying to help a blind
lady ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working
without a problem.
We are running into a problem
with the signal link connection.
It seems that there is no audio
coming through the signal link.
If there is anyone out there
that is using the TS2000 with WSJT-X could
you forward me the all the
appropriate menu settings in the TS2000.
The appropriate Audio In/Out
are already set in WSJT-X.
We have menus 50b and 50c set
to 8 and still no audio out and no
signals on the waterfall
If I switch audio in to the
internal mike, WSJT-X does decode via the
audio from the radio speaker so
I know that WSJT-X is working properly.
Any help would be appreciated
73,
Hi Sam,
what do you have checked for
"Settings->Radio->PTT Method"?
73
Bill
G4WJS.
-- Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
Georgina
Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS
|
|
|
PPT works through the 13 pin ACC2 port. For (audio based) data modes, PTT must be on *PIN 9*. Per the TS-2000 Manual, page 95 Pin 9 (PKS) transceiver PTT Line Control * Ground terminal to transmit * Connect to the TNC or MCP transmit/receive switching pin for digital operation * Microphone audio input mutes when the transmitter transmits Pin 11 (PKD) Microphone Audio input * Connect to the TNC or MCP transmit data pin for digital operation. Translation: PTT on pin 13 selects input audio on the mic jack (Foster/front panel). PTT on pin 9 selects input audio on pin 11 (PKD) of the ACC jack and *mutes* the front panel microphone. Note: This behavior is consistent for *all* Kenwood transceivers manufactured in the last 30+ years (since TS-140/440 era). 73, ... Joe, W4TV On 2020-09-05 4:39 PM, Georgina Joyce wrote: Hello,
Thanks, that has been checked. PPT works through the 13 pin ACC2 port. I know what I am doing with such plugs, thank you.
73
On 5 Sep 2020, at 18:52, Joe Subich, W4TV <lists@...> wrote:
I only have one SL-CAB-13K cable purchased from ML&S here in the UK a
few weeks ago. Be careful with *any* cable with a 13 pin DIN connector (like ACC2
in Kenwood transceivers or the ACC jack on the "small" Icoms). It
is possible to connect the 13 pin DIN plug "upside down" (rotated
180 degrees). When that happens, the expected connections are not
made - PTT via the ACC2 jack, audio in/audio out, etc. will not
work!
Check the ACC2 plug (DIN13) carefully before connecting it. The TS-2000
ACC2 jack has its keyway at the *bottom* of the rig with pin 13 as the
lone pin on the top row of the plug/connector. Because the key in the
plug often does not extend to the very edge of the shell, it it possible
to insert the plug into the socket such that pin 13 enters the keyway
and pins 1-12 of the plug connect (backward) to pins 12-1 of the socket.
73,
... Joe, W4TV
On 2020-09-05 12:51 PM, Georgina Joyce wrote:
Hello,
Just to add, I have tried 3 different USB to SL leads, with the same result. I only have one SL-CAB-13K cable purchased from ML&S here in the UK a few weeks ago.
Thanks,
On 5 Sep 2020, at 15:57, Sam Birnbaum via groups.io <w2jdb@...> wrote:
Hi Bill,
PTT is Cat and is working properly.
Initially she the radio settings to none and PTT to VOX.
Was able to key the radio, but did not have any audio coming back.
I changed the radio to TS2000 and made sure that CAT was working.
Baud rate is set to 9600 which I believe is the correct setting for the SignalLink.
OI also tried setting Mode to USB then tried Data/Pkt, no audio.
A friend of mine had his TS2000 working with WSJT-X and signallink so I know that it should work
Unfortunately , he no longer has the TS2000 hooked up so he can't check the settings.
There might be a problem in the cable connection to the TS2000 but there is no way that I can test for that on my end.
73,
Sam W2JDB
-----Original Message-----
From: Bill Somerville <g4wjs@...>
To: main@WSJTX.groups.io
Cc: gena@... <gena@...>
Sent: Sat, Sep 5, 2020 10:40 am
Subject: Re: [WSJTX] TS2000 and signal link problem
On 05/09/2020 15:28, Sam Birnbaum via groups.io wrote:
HI All,
I am trying to help a blind lady ham in the UK connect her TS2000 to WSJT-X.
I have CAT control working without a problem.
We are running into a problem with the signal link connection.
It seems that there is no audio coming through the signal link.
If there is anyone out there that is using the TS2000 with WSJT-X could
you forward me the all the appropriate menu settings in the TS2000.
The appropriate Audio In/Out are already set in WSJT-X.
We have menus 50b and 50c set to 8 and still no audio out and no
signals on the waterfall
If I switch audio in to the internal mike, WSJT-X does decode via the
audio from the radio speaker so I know that WSJT-X is working properly.
Any help would be appreciated
73,
Sam W2JDB
Hi Sam,
what do you have checked for "Settings->Radio->PTT Method"?
73
Bill
G4WJS.
Georgina
Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS Georgina
Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS
|
|
|
