Date
1 - 4 of 4
Locked Frequency error IC 706MK2
|
Hi I tried delete the post in “Frequencies” and retype the frequency (144.174.000). I checked CAT settings. But the problem is the same. Reinstalled v2.1.2 and all is OK again. Anyone else discovered this?
Radio Icom 706MK2, Win 10, USB CAT with FTDI FT232 chip.
73 Allan, OZ9AU |
|
|
|
On 11/07/2020 00:23, OZ9AU Allan wrote:
Hi Allan, thanks for the issue report, it is a known issue with the version of Hamlib used in WSJT-X v2.2.x. It has been fixed for the next release of WSJT-X. 73 Bill G4WJS. |
|
|
|
Joe Subich, W4TV
With v 2.2.2 (or probably hamlib <again>), there is a problem
toggle quoted message
Show quoted text
moving across any 100 MHz "barrier." If the IC-706mkIIg is operating below 100 MHz and one selects a frequency/band above 100MHz, the rig will go to a frequency below 100 MHz (missing the first digit, i.e., 144.170 -> 44.174 or 432.065 -> 32.065). If one is operating on two meters and selects a frequency on 432, the rig will go to 1xx MHz (e.g. 432.065 -> 132.065). If one is operating on 432 and selects a frequency on 144, the rig will go to 4xx MHz (e.g. 144.170 -> 444.170). If one is operating on 432 and selects a frequency on HF/6M, the rig will go to 4xx MHz (e.g. 14.074 -> 414.074) The issue is not resent with 2.1.2 (presumably the version of hamlib included therein). 73, ... Joe, W4TV On 2020-07-10 7:23 PM, OZ9AU Allan wrote:
Hi |
|
|
|
Hi Bill
toggle quoted message
Show quoted text
Thanks for your answer. V2.2.2. worked fine, especialy the fast decode. 73 Allan OZ9AU Den 11. jul. 2020 kl. 14.06 skrev Bill Somerville <g4wjs@...>: |
|
|