Date
1 - 20 of 36
Locked The dreaded no Transmit
|
Wayne Newport
hi all, I hope someone can help me. I just changed my shack computer (Windows 10). I downloaded the driver from the Kenwood website ok. I run wsjt-x via DXCommander. Rig control via CAT is ok. Recieve decodes just fine , keys the TX via CAT ok but there appears to be no audio reaching the Kenwood TS590s. I am seeing " USB Audio codec in Sounds (speaker) and have the level turned to maximum. In Windows settings I have 2. USB AUDIO CODEC selected for both audio device both Tx and rx . The TX level slider on the wsjt-x is also set at maximum.
The settings in the TS590s are fine as the radio still works on Tx and RX when my previous computer is reconnected. any help would greatly be appreciated Wayne VK4WTN |
|
|
|
On 07/06/2020 01:28, Wayne Newport
wrote:
hi all, I hope someone can help me. I just changed my shack computer (Windows 10). I downloaded the driver from the Kenwood website ok. I run wsjt-x via DXCommander. Rig control via CAT is ok. Recieve decodes just fine , keys the TX via CAT ok but there appears to be no audio reaching the Kenwood TS590s. I am seeing " USB Audio codec in Sounds (speaker) and have the level turned to maximum. In Windows settings I have 2. USB AUDIO CODEC selected for both audio device both Tx and rx . The TX level slider on the wsjt-x is also set at maximum. Hi Wayne, please follow the steps in this old post on how to set Tx audio levels: https://groups.io/g/WSJTX/message/5077 let us know if that doesn't get you up and running. 73 |
|
|
|
Check in Win10 Privacy settings that the mic is turned on for WSJTX. 73 Herb WB8ASI
On June 6, 2020 at 8:28 PM Wayne Newport <wazzan1@...> wrote: |
|
|
|
Wayne Newport
Thanks Bill as soon as I get home I will try the steps in the procedure and get back to the group
cheers Wayne VK4WTN |
|
|
|
Wayne Newport
Hi Herb I will look in privacy settings I think it will be the speaker rather than microphone for TX
Cheers Wayne VK4 WTN |
|
|
|
Gerald Klotz
Wayne click on the speaker icon on the bottom task bar. Make sure you have chosen the usb not the regular speakers.
toggle quoted message
Show quoted text
KB9pki Gerry Klotz On Jun 6, 2020, at 7:28 PM, Wayne Newport <wazzan1@...> wrote: |
|
|
|
Wayne Newport
Hi Gerald, when you click the speaker icon to go into sounds on speaker you see the various speaker alternatives including USB audio codec. The default audio speaker is Realtech (which has the green tick ) and the USB audio codec has the green telephone icon next to it. I believe that the default audio device is NOT meant to be the USB audio codec
Wayne VK4WTN |
|
|
|
Gerald Klotz
That’s why I suggested that be checked. If the wrong audio is ticked, it will appear that everything is working but no power output.
toggle quoted message
Show quoted text
Gerry Klotz On Jun 6, 2020, at 10:19 PM, Wayne Newport <wazzan1@...> wrote: |
|
|
|
Wayne Newport
hi Gerry finally got to the shack. Ok where I'm up to when I go into sounds (Speakers) I am seeing the ' 2-usb audio Codec with a green telephone icon Also "speakers Realtek High Definition audio" is set as Default Device which I believe is the correct way to set it up.. When I transmit with WSJT-X I am seeing the green audio signal on the " 2-USB Audio Codec" bar graph. I can vary the level on the bar graph with the power slider on WSJT-x. Going to " 2- USB Audio codec Properties" I have the level set to 100% (or 0db). So it would appear I have wsjt x audio to that point but not into the TS590s.. Again in WSJT-X audio settings are set to "2-USB audio Codec". I am a bit lost after this. I am sure there is a setting or adjustment some where to fix this but I am totally lost at this point.
cheers Wayne VK4WTN PS wsjtx is working fine with the radio when I connect it to my old laptop to it, so the problem is not in the TS590s settings. |
|
|
|
Jerry Hennis
I was having the same problem with my 590S. You may go into the midi section and make sure that it’s not muted. I unmuted mine and works fine
toggle quoted message
Show quoted text
Jerry K5ETU On Jun 7, 2020, at 5:21 PM, Wayne Newport <wazzan1@...> wrote: |
|
|
|
Please use the Snipping Tool app in Windows 10 to copy settings screens to better show us what you are seeing.
73,
KV4VT
Sent from Mail for Windows 10
From: Wayne Newport
Sent: Sunday, June 7, 2020 6:21 PM To: main@WSJTX.groups.io Subject: Re: [WSJTX] The dreaded no Transmit
hi Gerry finally got to the shack. Ok where I'm up to when I go into sounds (Speakers) I am seeing the ' 2-usb audio Codec with a green telephone icon Also "speakers Realtek High Definition audio" is set as Default Device which I believe
is the correct way to set it up.. When I transmit with WSJT-X I am seeing the green audio signal on the " 2-USB Audio Codec" bar graph. I can vary the level on the bar graph with the power slider on WSJT-x. Going to " 2- USB Audio codec Properties" I have
the level set to 100% (or 0db). So it would appear I have wsjt x audio to that point but not into the TS590s.. Again in WSJT-X audio settings are set to "2-USB audio Codec". I am a bit lost after this. I am sure there is a setting or adjustment some where
to fix this but I am totally lost at this point.
|
|
|
|
Wayne Newport
Hi Jerry, what is the midi section? Will definitley check that when I find where it is
Wayne VK4WTN |
|
|
|
On 07/06/2020 23:21, Wayne Newport
wrote:
hi Gerry finally got to the shack. Ok where I'm up to when I go into sounds (Speakers) I am seeing the ' 2-usb audio Codec with a green telephone icon Also "speakers Realtek High Definition audio" is set as Default Device which I believe is the correct way to set it up.. When I transmit with WSJT-X I am seeing the green audio signal on the " 2-USB Audio Codec" bar graph. I can vary the level on the bar graph with the power slider on WSJT-x. Going to " 2- USB Audio codec Properties" I have the level set to 100% (or 0db). So it would appear I have wsjt x audio to that point but not into the TS590s.. Again in WSJT-X audio settings are set to "2-USB audio Codec". I am a bit lost after this. I am sure there is a setting or adjustment some where to fix this but I am totally lost at this point. Hi Wayne, I see no mention above of you checking the Windows sound Mixer level for WSJT-X. Did you go through the settings checks in the old post I linked earlier in this thread? https://groups.io/g/WSJTX/message/5077 73 |
|
|
|
Wayne Newport
hi Bill, yes I found the mixer and adjusted the two controls to maximum. I also see when I transmit the green levels on the mixer sliders go to about 80% level so I assume there is audio at that point. I have also adjusted the slider on Playback (Speakers) 2- USB Codec (properties) level to 0 db which is full on. I take it that it reads 0db regardless of whether your txing or not. Still no TX unfortunately. So at present I am seeing audio present on both the playback USB codec bar and also on the mixer sliders so I guess the audio is disappearing after these devices.
Really appreciating the help Bill, I must admit I do get very frustrated with computers Wayne VK4WTN |
|
|
|
hi all, just added some screenshots if they are of any help
Wayne VK4WTN |
|
|
|
John G0GCD
Mine's a Yaesu but have just gone through this heartache. In my case, I flipped the PTT control from being controlled by the Data pin to using the CAT interface when upgrading to 2.2.1. When keyed by the CAT, the Yaesu rigs look for audio from the Mic socket and ignore the data in, and the converse is true. Putting PTT back on the data pin (using the serial interface in my interface) restored the TX audio being accepted from the data pin (and turning the mic off)
Only mentioned it because the symptoms are identical. Quick check, whilst transmitting, tap the microphone. If that causes your power meter to jump, then you've selected the wrong audio input. HTH John G0GCD |
|
|
|
Wayne Newport
Thanks John I don’t think that the problem was the radio as it still works with my old laptop.As soon as I sort the computer out I am actually getting an FTDX3000 so I will remember about the mic menu
regards Wayne VK4WTN |
|
|
|
Richard Lawn
I experienced a Windows 10 update last night. I thought I had put it on hold but apparently not. And this morning I found that there is little or no output from my K3. All the settings remain the same in both WSJT-X and in the Windows sound control panel. I've tried unplugging the USB cable from the K3 and reconnecting it to no avail. I'm just not sure what to try at this point. I'm using WSJT-X v2.2.0. Any suggestions? I'm missing out on a nice morning opening to EU on 6m FT8! 73 Rick, W2JAZ -- Rick, W2JAZ |
|
|
|
On 08/06/2020 14:53, Richard Lawn
wrote:
Hi Rick, Windows updates often reset settings. Try going through the instructions in this old post: https://groups.io/g/WSJTX/message/5077 73 |
|
|
|
Richard Lawn
Problem on my end solved. No issues. Rick, W2JAZ -- -- Rick, W2JAZ |
|
|