1. WSJTX | Main
  2. Topics

Locked V2.1.1 settings menu page will not fit raspberry pi display

Bob Watson <kn4hhptc@...>
 

I installed V2.1.1 on my raspberry pi 4B with a waveshare  7 inch hdmi display. The first screen displays properly.  When I go to the Settings screen, I am able to input all the required data.  However, the page is too large to see the Save button and I am not able to retain the settings.  I tried to move the page around the screen.  I could move the page from side to side but not up and down enough to see the Save button.  This is the only page I have this problem with.  All other installed apps display properly.

I would appreciate any assistance.
73, Bob, KN4HH 
Bill Somerville
 

On 17/04/2020 01:03, Bob Watson via groups.io wrote:
I installed V2.1.1 on my raspberry pi 4B with a waveshare  7 inch hdmi display. The first screen displays properly.  When I go to the Settings screen, I am able to input all the required data.  However, the page is too large to see the Save button and I am not able to retain the settings.  I tried to move the page around the screen.  I could move the page from side to side but not up and down enough to see the Save button.  This is the only page I have this problem with.  All other installed apps display properly.

I would appreciate any assistance.
73, Bob, KN4HH
Hi Bob,

the default action is "Ok" so just hit ENTER.

73
Bill
G4WJS.
Phil
 

On 17/4/20 9:33 am, Bob Watson via groups.io wrote:
I installed V2.1.1 on my raspberry pi 4B with a waveshare  7 inch hdmi display.
I think you need to press the alt key while holing down the left mouse button.

--

Regards,
Phil
Bob Watson <kn4hhptc@...>
 

Thanks so much, Bill.  Enter did the trick.  Also thanks to you Phil for teaching me ALT + left mouse click for scrolling.
What great responses to my first querry on this group.  Thank you all so much.

73, Bob, KN4HH

On Thursday, April 16, 2020, 8:26:54 PM EDT, Bill Somerville <g4wjs@...> wrote:


On 17/04/2020 01:03, Bob Watson via groups.io wrote:
> I installed V2.1.1 on my raspberry pi 4B with a waveshare  7 inch hdmi
> display. The first screen displays properly.  When I go to the
> Settings screen, I am able to input all the required data.  However,
> the page is too large to see the Save button and I am not able to
> retain the settings.  I tried to move the page around the screen.  I
> could move the page from side to side but not up and down enough to
> see the Save button.  This is the only page I have this problem with.
>  All other installed apps display properly.
>
> I would appreciate any assistance.
> 73, Bob, KN4HH

Hi Bob,

the default action is "Ok" so just hit ENTER.


73

Bill
G4WJS.

1 - 4 of 4