locked Thoughts, please? Windows 10...


Scott Rosenfeld <ars.n7ji@...>
 

Somehow my WSJT-X audio level to the radio is screwed up.

It was working fine as of Thursday / Friday.

Windows 10.

FLDigi drives it fine, as always.

WSJT-X, even with the slider at full, gives me almost no audio output to the radio.

I have checked that the speaker being used is the USB codec. I have the monitor function active in the 7300 so I can hear the audio driving signal. I’ve gone into the windows audio mixer and messed with everything.

Nada. Just a teeny tiny audio signal.

I even uninstalled WSJT-X 2.1 and installed 2.12.

Help?

Scott n7ji
--
Scott N7JI


Bill Somerville
 

On 31/03/2020 01:58, Scott Rosenfeld wrote:
Somehow my WSJT-X audio level to the radio is screwed up.

It was working fine as of Thursday / Friday.

Windows 10.

FLDigi drives it fine, as always.

WSJT-X, even with the slider at full, gives me almost no audio output to the radio.

I have checked that the speaker being used is the USB codec. I have the monitor function active in the 7300 so I can hear the audio driving signal. I’ve gone into the windows audio mixer and messed with everything.

Nada. Just a teeny tiny audio signal.

I even uninstalled WSJT-X 2.1 and installed 2.12.

Help?

Scott n7ji

Hi Scott,

this post details how to set the Tx audio levels with WSJT-X:

https://groups.io/g/WSJTX/message/5077

Note particularly that you should set the Tx audio offset to about 1500 Hz for this procedure.

73
Bill
G4WJS.