fixed the problem! In the setup menu, the Split Operation was set to "None" (since I do not want to operate in split for digital modes). Set this to the option "Rig" solved the issue with the ooB en 0

#Yaesu

Yes, I use Omni-rig with Log4om. I think that I have to look deeper into Omni-rig. Kari has a valid point to check for possible Omnig-rig support. Thanks, 73, Nico PA3ADU

#Yaesu

I think you mean the frequency tab in the setup menu. This menu, I have not touched and is still as the original installation. Also, when I am not using Omni-Rig, everything is working as expected. So

#Yaesu

Thank you Dave for your comment. The FT897 is set in the VFO mode. I tried to understand the responce on the spilt / non- split mode and found out that when I select the SPL mode in the FT897 I got th

#Yaesu

Hi, Trying to set up WSJT-X in combination with Omni-Rig. RX works as expected and the FT-897 is responding correctly. But at TX, the freq. display turns red and showing 0,0000. It is just the diplay

#Yaesu

Thanks again Bill. This is the trick!. The issue is indeed the internal soundcard setting in the FTDX101. Followed your instruction as per link below and adjusted the RPORT GAIN to just get ALC readin

#transmit

Thank you Bill for the link how to set up the audio. I am aware of adjusting the audio mixer in Windows. This worked fine with my FT1000 and FTdx1200 where I set the mixer to a zero ALC reading at the

#transmit

Hi, Trying to control the TX output with the PWR slider. My transceiver is a FTDX101D. Coding and decoding FT8 is working and also the transceiver freq. control Observation: Set TX power at 40 Watt us

#transmit