I am not aware of any way to have WSJTx do this as WSJTx has no notion of "name". Having it in the log probably depends upon your logging program. I have WSJTx log to HRD. Grid tracker does a follow u

#logging

Not sure if WSJTx has a "worked before" highlighting. If it does, I don't use it. However, it does have highlighting for "needed entities". By properly setting up the "needed entries" color coding, yo

#EnhancementReqest

Firewall settings and/or port conflict with another program. My guess... N2SCJ Bob

#Timesync

Your problem is the opposite of mine. I've tried for years to not see CW spots, but could not achieve that with 100% accuracy. I believe spotting networks determine mode by frequency, so the mode may

#WSJTX_config

4G is a good amount of memory for W7. For W10, its barely enough. I have 16g Win10 machines. One of them may have 32G. I’ve never tried more than one instance of WSJTx though. I usually have Outlook,

#WSJTX_config #Windows07

If only it was that simple. Not a solution in this case. That comment refers to programmatically setting mode. Not a user operation. 7 3 Bob N2SCJ

#Cat_RigControl

Rich, I finished working with Bill. He did confirm it’s not an issue in WSJTx. He provided some technical comments I can’t repeat without copy and paste. He suggested I try your method. I did. Then I

#Cat_RigControl

Bill, WSJTx v2.5.0-rc6. I got this from Mike when we were working on 7610 with same filter problem. I upgraded in an attempt to fix 9700. IC-9700 VFO-A and VFO-B set to Fil1. Hit tune. It TX on VFO-B

#Cat_RigControl

Bill, I stand corrected. I was running in non-contest config when I answered that. I went back to N1MM then launched WSJTx from within N1MM. The correct answer is Mode=None. I start my test with rig m

#Cat_RigControl

Mode=Data/Packet. Not sure how I ended up with that setting. 73 Bob N2SCJ

#Cat_RigControl

Bill, Non contest I use HRD Logger. HRD is not involved with rig control. In addition HRD Logger is on a different network PC. I let WSJTX deal directly with IC-9700. Win4ICOM is port sharing. All is

#Cat_RigControl

While using N1MM for rig control which I understand emulates DX Labs Commander I ran into the following issue with WSJTx. WSJTx uses DX Labs Commander Suite as the rig. For the rig I am using Rig=Spli

#Cat_RigControl

Try setting the color scheme (not sure if that is the name) to default. This can be found at bottom of waterfall window, 2nd row down, third input box over. I once had a problem of no colors on waterf

#Waterfall

Guys, I appreciate all the comments. I am being assisted by one of the developers off line. Rather than individual replies, I’ll provide an update when this is all over. 7 3 Bob N2SCJ

#WSJTX_config

False alarm on fw. Dev will be calling me. Thanks for the suggestion. 7 3 Bob N2SCJ

#WSJTX_config

Dev says I need to update firmware. Checking…

#WSJTX_config

No. I am working with one of the developers. He may be onto something. It acts like software is setting fil2 for TX, but setting it on my RX as well. After TX stops filter ends up being changed from f

#WSJTX_config

Wide is no problem, but it won’t stay on wide, it goes mid. When it goes mid on RX I don’t get decodes across the entire passband. Upper and lower passband decodes are not heard and won’t be decoded.

#WSJTX_config

Not fine. I won’t stay on Wide. That is the problem.

#WSJTX_config

Wrong assumption. I want to wide RX on one side of rig, and let it do mid TX on other side of rig. I can manually set filters that way. Upon first TX with rig control and rig=split it changes the RX f

#WSJTX_config