Thanks to all. Now I understand. 73 Bob, K4TAX

#FT8

Thank you. Not that I see it very often but when I do, I wonder what it means. 73 Bob, K4TAX

#FT8

From time to time I see a decoded line in the RX window that displays, as example,: 161915 -23 0.1 2455 ~ <...> K2TV FM18 So what does the <...> in the decoded line indicate? I've searched through the

#FT8

I'm using a Dell OPTIPLEX 7020 with Windows 10 Pro. I use the Windows USB Audio CODEC with zero issues regarding power drift. Which means there is no audio level change during transmission. I do not u

#TechnicalHelpQuestion

Both radios are connected via USB to one computer. To configure, right-click on the WSJT-X icon and In the Properties line of WSJT-X, one will need to add the specific radio name using the following:

#logging

Unless one knows how to manage and understand audio levels, I find frequently many connect the output signal from their computer to the MICROPHONE input of their radio. This method is very easy to ove

#reception

Thanks, Dave. Good to know, I'll look into it. 73 Bob, K4TAX

#logging

Thanks Sam. I'll give it a try. 73 Bob, K4TAX

#logging

Thanks Mike, but only one computer being used. For now, using Notepad, I'll just copy and paste. PITA but it works. 73 Bob, K4TAX

#logging

I'm running two instances of WSJT-X on one computer. I'm using two different radios and two different antenna systems. Either or both work correctly. The issue, after making a contact on either one an

#logging

> I'm running two instances of WSJT-X on one computer. I'm using two > different radios and two different antenna systems. Either or both > work correctly. The issue, after making a contact on either

#logging

What is wrong with using good old fashion SSB? There is a lot less headaches and computer issues to deal with. 73 Bob, K4TAX -- In life it is important to know when to stop arguing with people and sim

#QSO_practices

In the referenced issue, I contribute the wide signal to several operator related factors. The ham is a relatively new with a Technician grade license. He does not have much, if any, electronic experi

#TechnicalHelpQuestion

In this case, the fundamental signal was at 2000 Hz. Fortunately the SSB filter in the radio would not pass the harmonics thus there was not an observable 4 kHz or 6 kHz signal. The cause was excessiv

#TechnicalHelpQuestion

Regarding item #2, Make sure the check box on the Setup - General tab, "start new period decodes at top" is not checked. Works just find with my K3S. I'm not running any other or associated applicatio

#general

Downloaded and installed rc4. Seems to run just find with my Elecraft K3S. 73 Bob, K4TAX

#general

I would use my cell phone as a hot spot and connect my laptop to the hot spot for internet access. 73 Bob, K4TAX

#Timesync

The issue seems to be identified and resolved. Best described as improper operator set-up and operation. Thanks to all who contributed. 73 Bob, K4TAX

#TechnicalHelpQuestion

I gave up on Meinberg due to some complexity, although I found it did a good job. I switched to Dimension 4 V5.31, then deleted all the sites which were outside the US. I find that WSJT-X in FT-8 mode

#Timesync

No multiple signals observed on the band or from this signal. Observed by the WSJT-X waterfall or on my Elecraft P3 with a 100 kHz BW, fed from my K3S. 73 Bob, K4TAX -- In life it is important to know

#TechnicalHelpQuestion