Seconded. Not an RFI issue Tim but an undesirable effect from Dell, just been through the same pain! God Luck Tony G4NBS

#signalink #windows11

Would it not be nice (and sensible) to put a note on the Princeton site itself to let visitors know where they should be looking instead? And also remove the links as they point nowhere now. Not every

#install

Quote - I'm curious whether others are really encountering many stations that seem to be listening so narrowly? This really has not been my experience at all. I sometimes just monitor activity in the

#FT8

Negative Dave As said my configuration is set for the K3 to operate using "RIG SPLIT" I do not use Fake it. After the QSY was invoked by the other station only my Tx VFO (B) moved leaving the Rx VFO (

#Cat_RigControl

OK David - now understand the reasoning and the problem HI! If you use LOTW Steve I guess you upload your logbook with the different station locations that give the appropriate 6 digit Grid? When my l

#QSO_practices

Surely you should log whatever was sent over the air at the time of the QSO?? One would hope that the other station knows where he is transmitting from and is transmitting the correct locator at the t

#QSO_practices

Have to admit I missed this feature in FT8 (though use it often for MSK) and was also surprised to find my transmitter had been moved when I clicked on a CQ call on Wednesday. In my case it was anothe

#Cat_RigControl

Most likely your noise level is much lower than the station(s) you are working but I have also noticed a difference in the reports I give out depending which radio/AGC setting I am using. Normally I u

#FT8

Every contest that I have been in states that the score is not necessary as their software will figure your score. Hi Steve Glad the tips helped - and cheers to Phil about not including the header, se

#ContestMode #logging #NewUser

Hi Steve - not dumb but 1 & 3 are obvious when you know how. 1) Do not delete the original WSJTX_Log.ADI file, just rename it for time being. WSJTX uses it in order to keep track of all your contacts

#ContestMode #logging #NewUser

>>Try to stay near the 1500Hz center of everyone's passband, but don't be afraid to work the edges, I've gotten responses from 3KHz or more, and a lot of people do the 'low hundreds'. If there's a cho

No issues with my K3 using V2.4 Steve. Only error I sometimes have has been constant over many versions. If I have used the K3 on CW on a band before I select that band via WSJT I might have an offset

#Cat_RigControl

From Bill "some stations may be located in regions where local noise is highly variable, for example heavy usage of solar panels with noisy switch-mode inverters," Being in the (un)fortunate position

#modes #Icom

Hi Joe I also managed to invoke this "defect" last night on FT8 using V2.4.0 I manually changed TX5 to say "KV4BV JO02 73" but the actual transmitted message was "KV4BV JO02 60" as seen on my own yell

#Q65

My main PC is a Dell Optiplex 780 W10 64 bit Intel Core 2 Duo CPU E8400 @ 3.00GHz Plenty fast enough for current WSJT but does not support AVX I also have a couple of laptops which occasionally get pu

#general

Hi Martin - Yes! Also a Dell running W64 fully up to date and installed into a fresh folder. V2.4 dropdown lists were all OK for me except one I use for VHF that only had 6m, 2m and 70cms QRG in - tha

#IssueReport #general

>>I hope this helps. There’s a big difference between operating MS with MSK144 and Es with FT8 and other WSJT-X modes. >>Gary - AG0N Try reading the original post Gary! Aurelian asked if it was possib

#FT8

Try using TX5 free text message to advertise QSY to an alternative? Or even use a chat room facility like KST to organise QSO away from the main frequency. I've seen both methods used on HF and 2m wit

#FT8

HMMM... CQ RSGB G4NBS JO02 is a tad longer than 13 characters and works but it only remembers it if I enter it as Caps....... Bill - can you confirm/deny if I am correct as putting rsgb in lower case

#GeneralGroupInfo

Are you entering all of the the text as CAPITALS Dave? Might not be the case for you but I discovered the other day that if I entered a special message in my cq partly in lower case it did not remembe

#GeneralGroupInfo