Hi Chuck, No, nor would I but it happens frquently. Station calls CQ, I reply on a different offset, and they come to my offset. Probably not got "Hold TX Freq" checked? 73 Bob G8hgn

#QSO_practices

I recently put up a 10M dipole to sample some of the good conditions, I normally only work on VHF/UHF. It surprised me that with so many of my contacts on FT8 the CQer or caller moved to my offset in

#QSO_practices

Hi Karza, Many thanks for that. I should have worked that out! I can see all the bars in the test file much easier now. And thanks to Michael for the file. 73 Bob G8HGN

#WSJTX_config #Waterfall

Hi Michael, I'd like to try that out. Where in the WSJT-X files would that go please. I've looked at the files and don't see any other .pal files for the existing palettes. But I'm probably looking in

#WSJTX_config #Waterfall

Hi, The message could mean several things, "please QSY to 144.342" (not likely), but more probably " you are on 144.342, please QSY away to where you should be". The free message only allows a limited

#Cat_RigControl

Hi Peter, This can sometimes be due to your monitor and its sleep function. I set mine to never sleep and it cured this, no issues for 2 years now. Some monitors have a hidden USB function which cause

#txaudio

Hi, I'm not getting into the debate about whether you need the "extra" 73, BUT, the program used to send it if RRR was selcted. I've been on 6M most of the Summer so haven't really needed to use RRR f

#FT8

Hi Yvon, There have been several threads on this type of problem. You just need to find the right keywords in search. However, I had a similar problem a couple of years ago now and it turned out to be

#FT8

Hi, When the band is open 50.323 is still relatively quiet here in Europe. So why do op's persist with 50.313 and then moan that there's to much QRM to work the DX. In IARU region 1 all MGM "should" b

#modes

Hi Jaime, You need to copy over your .ini file to the new instance. I just did this for a IC7300 & 9700. I made the original file as a MASTER and then did the rig names for each one. So I have 3 ICONS

#raspberryPi #WSJTX_config

Hi, If someone calls me TX2 then I work them and worry about the grid later. Replying to a station, I usually reply with my grid. However, if I do that when working the USA on 6M, I rarely get answere

#FT8

Hi, Considered? It's been in use a least for last years Es season and probably before that. 73 Bob G8HGN Sent: Friday, May 21, 2021 at 7:00 PM From: "ve4cy" <jwt@...> To: main@WSJTX.groups.io Subj

#FT8

Hi, There are 2 , possibly more, issues here. 1) The tune issue has been addressed on here and is hopefully being fixed next release. If you hit tune and then decide to call CQ or answer someone the 1

#general

Hi, There isn't a "worked before" button per se, but if you arrange your colours correctly it will effectively give you that. See attached screengrabs of my simple set up to allow that. You order the

#FT8 #GeneralGroupInfo

HI, Maybe something has changed in the newer versions, as I've just had a QSO using RRR and got 73 from the other op' and sent a 73, all using Auto. As far as I'm aware this has always been the case.

#FT8

Hi, I had this today. I'd switched the rig on for cold and was in 6M FT8. I hit the tune button to check I was transmitting OK, and I was. I saw a station in the waterfall and double clicked and the r

#AudioIssues

Hi Jim, I had this problem a while ago, it seems to be linked to the monitor going to sleep. I changed my settinsg to stop the monitor sleeping and haven't had another instance of this. That's over 18

#txaudio #transmit

Hi, Settings/Reoprting?Logging look at tick boxes are any ticked? "Prompt me to log QSO" for instance. HTH Bob G8HGN

#logging #FT8

Hi Dave, Just a thought, have you got "Monitor returns to last used frequency" ticked in Settings/General/Behavior? 73 Bob G8HGN

#Q65

Hi Uwe, In IARU Region 1 MGM modes are supposed to be between 50.3 and 50.4. In regions 2&3 they are included in the 50.1 to 50.4 range along with CW/SSB. Wsjt-X is being driven, in genral, by the US,

#GeneralGroupInfo