Page 73 of the manual describes (or at least alludes to) the limitation you are experiencing on 60M. The radio only outputs RF if USB or CW is selected. You will need to change your configuration to u

#FT8 #transmit #macOS

The Screen Saver is described on pages 29 and 85. There is only one variable, which can be set to one of 4 settings: Off, 15, 30, or 60 minutes. Does anyone know the details as to why the ICOM behaves

#Cat_RigControl

If I leave WSJT-X (v2.3.0) open but unused, my FTDX10 screensaver will not turn on. If I close WSJT-X (but leave the radio on), the screensaver does turn on. The IC-7300's screensaver turns on under e

#Cat_RigControl

Cliff, An SWR report - that's classic. One of the reasons I lament the loss of such thorough manuals is that one could learn from them. In fact, any reasonably curious person couldn't help but learn f

#FT8

Hi Bill, I was under the (mistaken) impression that the journal was of a fixed maximum size and rolled off old entries to make way for new ones because the start date of my all.txt file was more recen

#FT8

Jon, here's a link to some additional information: https://github.com/rfrht/FT-991A/wiki/How-To-Do-FT8-In-60M-With-FT-991A

#FT8

Well, thanks for all that... stuff; but what I was asking is: is there a config setting that will allow me to significantly increase the size of the all.txt file?

#FT8

In fairness, most manuals for technical products today are so very poorly written as to be little more than a detailed feature list. There are some obvious contributors to this unfortunate situation (

#FT8

Is there a way for me to change the size of the WSJT-X all.txt file? I'd like to be able to substantially increase its size.

#FT8

Bill, that is a subtlety that clearly escapes many thousands of users. Once you explicitly stated above that no reply should be expected, and I re-read the manual, I understood. But before that I didn

#FT8

Nope. No difference. I didn't log and it WSJT-X still sent the 73 in response to the second RR73. I then double-clicked on the RR73 at 175430 and WSJT-X then sent the second CQ at 175446. The 73 at 17

#FT8

You directed that to Chuck, but I have ALWAYS logged the QSO by that point. I have "Prompt me to log QSO" checked on the Reporting tab of Settings. So WSJT-X prompts me to log as soon as I initiate my

#FT8

Chuck, That is definitely NOT the behavior I observe. Like you, I click the "Enable Tx" immediately after logging the contact. In the snapshot below, when that second RR73 was sent at 173600, "Enable

#FT8

Yes, I just confirmed that I am double-clicking on the repeated RRR message and the behavior I reported occurs. That is, a CQ is sent; not another 73.

#FT8

This doesn't seem right to me... Mode: FT8 Relevant setting: Auto Seq (checked) I answer a CQ by d-clicking on a line in the Rx Frequency list box. The other side sends my signal report. WSJT-X sends

#FT8

Yes. Better to treat the disease than the symptom - if you can.

#NewUser

Hi Bill, After using the "Tune" button, you can't just click "Enable Tx" and expect it to work because more than half the time it doesn't. I've tested Gene's workaround (using "Halt Tx" to stop tuning

#IssueReport

I have two rigs currently running WSJT-X v2.3.0. One is an ICOM IC-7300 v1.3 The other is a Yaesu FTDX10. Because I use external antenna tuners on both, I have checked both the "Transmit" and "Tune" c

#IssueReport

Hi Patrick, Do you have another computer you can try in an attempt to determine if the computer is the source?

#NewUser

I was away from the hobby for 30 years and the FT-991A was the first rig I procured upon return. So, everything but the fundamentals were completely foreign. I got the rig working FT8 on SSB first (mo

#FT8