I'm running an IC 7300. 73, Jeff Elkins K5JF

#windows11 #AudioIssues #Icom

OK, after fighting this for days, I finally grabbed a ferrite and wrapped my USB cable (never had an issue with this cable with previous setups) just in case this was an RFI issue: https://wsjtx.group

#windows11 #AudioIssues #Icom

Yeah, I jumped through all the RealTek hoops; disabled the rt devices in device manager, disabled driver updates, even booted into safe mode and moved the rt drivers out of the way. Bill says that the

#windows11 #AudioIssues #Icom

All the privacy options are checked.

#windows11 #AudioIssues #Icom

I'm unable to run wsjt-x on a new PC due to error in sound input messages. Started with Windows 10, continued with Windows 11. I've tried disabling the RealTek audio devices, but that didn't help. Thi

#windows11 #AudioIssues #Icom

Thanks Phillip!

Thanks Bill. Seems to work fine.

Sorry, premature send. I'd like to change the default logging directory to a network share. This is trivial using Mac/Linux symlinks, can't figure a way to do it using Windows.

Is there a way to change the default logging directory? I

For the Linux machine it's the laptop's internal speakers. For my Mac mini it's powered speakers which can connect via wire or bluetooth and the feedback occurs with either type of connection (also wi

It's only on 80/40 meters, but I just turned the monitor down to 0 and it still occurs. 73, Jeff K5JF

I'm running into an issue on 40/80 meters with loud feedback bleeding through my computer speakers, no problems with 30 meters and below. I put a couple of ferrite cores on my USB cable, but no joy. M

Success! I'm not exactly sure why, but today it's working. I edited a new rule using Bill's suggestion and it fired w/o problems. No idea what was going on yesterday. Thanks to everyone who replied! 7

Ron, Yes and thank you. No success as yet, looking at this morning's replies.

Unfortunately, no change. after udevadm control --reload-rules ; udevadm trigger the symlink isn't in /dev/ nor after a reboot. Very puzzling.

Hi Bill, Here's my udevadm info: Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes i

In my case the actual symlink isn't present in /dev/ -- I'm still trying to track down the issue. The 7300 depends on the 210x driver from Silicon Labs, so I downloaded the source and compiled my own,

OS: Ubuntu 18.04 Radio: IC-7300 I have an issue with /dev/ttyUSB0 cycling to ttyUSB1 and vice-versa. I'm trying to solve this via udev, but it's not taking. In /etc/udev/rules.d/99-usb-serial i have:

I've yet to find a tutorial regarding the various messages shown by wsjt-x. i.e. report-19, etc

No worries! 73