I have also reverted to 2.5.2 and 'fake it' for split control. I experience the same thing that you have.

#Yaesu

Reino, I just tested with USB and Data/Pkt modes and Rig split operation - no joy - the exact same behavior

#IssueReport

To be clear - the 'walking' is not an issue or concern at this time - I am only interested in resolving the inability to RX every other cycle when using RIG control method when operating Split. Walkin

#IssueReport

One other interesting note that I believe removes RFI from the equation - I can induce the issue by changing frequencies in WSJT-X. Let's say I am on 20 meter, if I select 30 meter from the drop down,

#IssueReport

Reino, Thank you for you testing results. My walking has stopped after disabling the 'Allow Tx frequency changes while transmitting' as suggested by Bill. I will try changing the baud rate to the rig

#IssueReport

Bill, Thank you for the explanation. It's interesting that the quirk is present in 2.4.0 GA and 2.5.0 rc-1 but in no previous versions (I have versions going back a couple of years). I have not update

#IssueReport

Bill - I appreciate your efforts to diagnose. I changed that setting and will test. Regarding bug vs. issue - I'll refer to it as a regression going forward. History: - first manifested in 2.4.0 GA -

#IssueReport

Bill, PTT: CAT Control COM7 / 57,600 baud, 8, 2, none PTT CAT, Mode None, Split Fake It Allow TX frequency changes while transmitting is checked. Is the development team considering squashing this bug

#IssueReport

Bill, The problem with fake-it is eventually the rig wanders - meaning it will fail to return to the base frequency and instead stays at the fake-it frequency. For example, on 20 meter the rig is list

#IssueReport

Version: WSJT-X 2.5.0 RC1 Rig: Yaesu FTDX-3000 Mode: FT8 / FT4 tested When transmitting using Rig Split mode, VFO-B is switched to for transmit, and the RX light for VFO begins flashing. After the TX

#IssueReport

Gary, Thank you for your response, however I was referring to the fact that 2.4.0 GA has a rig control bug - a severe one. I was referencing a bug fix for the GA and not a replacement for rc4 Best reg

#IssueReport

Checking to see if there is an anticipated update before the clock runs out on rc4. Thanks!

#IssueReport

Kit, I noticed that works as well. If there is not a patch by the expiration date of rc4 I'll have to run in that mode. @Bill - was the log file helpful?

#IssueReport

Bill - file attached. Interesting new (or at least unnoticed behavior: - the first time the TX / RX cycle runs, RX is disabled (the RX light is flashing) - the next time the TX / RX cycle runs, RX is

#IssueReport

Version: WSJT-X 2.4.0 GA Rig: Yaesu FTDX-3000 Mode: FT8 / FT4 tested When transmitting using Rig Split mode, VFO-B is switched to for transmit, and the RX light for VFO begins flashing. After the TX c

#IssueReport

Thank you for the detailed explanation Bill! I hereby rescind my bug report.

#IssueReport

Bill, Thank you for responding. I was actually able to resolve it : - Select a band (starting at 160 meters) - go to VFO A and set IPO / Mode (USB), Split, Width, etc. - go to VFO B and set IPO / Mode

#IssueReport

Same issue as rig control on 2.3.0 rc4 WSJT-x does not control the rig properly: - does not band switch VFOA - Changes IPO mode randomly - Does not split properly. - Changes VFOA to LSB - Rig responds

#IssueReport

Setting my monitors to NOT sleep (use a screen save instead) has resolved the issue

#transmit

Selecting a different audio output and switching back does fix the issue.

#transmit