True but pacman would still trigger the install for indi even though hamlib would have compiled without it. I'm sure there is a way to tell the Arch-based distros that a specific library is installed

#Cat_RigControl #linux

Original file https://drive.google.com/file/d/1Ttr_HOOYPiTKvWnmcFwhY98YnCajpBGE/view?usp=sharing After altering https://drive.google.com/file/d/1inlG-3iKBrD1XOMn_5lm4Y3A2SA4l2KX/view?usp=sharing This

#Cat_RigControl #linux

The display on the rig acts as expected. The rig does not produce any sound from it's speaker during transmit, only receive as expected. I would most likely downgrade back to 4.4 as I already have tha

#Cat_RigControl #linux

Just as an experiment just now, I set my offset to 2504 Hz where VFO B would go to 14.075 which caused the rig to receive as if it tuned both VFOs to 14.075. Then without changing the offset, I clicke

#Cat_RigControl #linux

Sharing from google drive. https://drive.google.com/file/d/1q_h4kiBx1e1io4lNXDMkUNgmbaDENAgz/view?usp=sharing Thanks for your help. If this is a hamlib problem, I can either post my question to a haml

#Cat_RigControl #linux

rigctl Hamlib 4.5~git Fri Jun 17 22:26:45 2022 +0000 SHA=60635c I just installed it today. Prior to that I manipulated the PKGBUILD file for hamlib 4.4 to keep out indi support.

#Cat_RigControl #linux

If I am remembering correctly, N3FJP AC Log and JT Alert will highlight the call signs themselves versus the entire line. I can't remember right off as I only use Windows when remote. I should word th

#EnhancementReqest

Something that caught my attention today, but I don't know if this has been an ongoing issue or something new. I have WSJT-X set to use rig split mode, thus putting the rig in split mode (expected.) W

#Cat_RigControl #linux

Bill, I got my answer in the Facebook group. All I needed to do was select "hamlib NET rigctl" in the "Radio" tab, to utilize rigctld. Log4OM can also talk to rigctld in its CAT control. I had been so

#Cat_RigControl

I asked this on the Facebook group, but this question may be better suited here. Can WSJT-X on Windows 10 be configured to use hamlib/rigctld on the same machine, instead of its internal? What I would

#Cat_RigControl