Hi Steve, I have my radio, IC705, set up the same way. I have found that reducing the RF gain on the rig is the quickest/easiest way to reduce the audio levels. 73 Mark KK2L

#Windows10 #AudioIssues

Hi Mike, No, the ground rod is not bonded to the house ground. However, I have solved the RFI problem with RS-BA1 software. Using the rig as a server access point, with the software, solved the hardwi

#band #AudioIssues #Icom

I should have come back to the group sooner. I didn't get an e-mail that my original post was answered. Anyway...bingo! Yes, when I reduce power, (down to 45 watts) even on the upper bands, the radio

#band #AudioIssues #Icom

One more thing...just to be clear, I am experiencing this issue on my portable CHAMELEON MPAS 2.0 which only has a radial coming from the antenna and my universally grounded (copper rod) antenna in my

#band #AudioIssues #Icom

I just got back to the group. My shack is grounded to a copper rod buried in my garden. All radios, amps, tuners etc are wired to the same copper rod. 73 Mark KK2L

#band #AudioIssues #Icom

Good Afternoon All, I am having this same problem but only from 18mhz on up. On 14mhz down, the rig (IC7100) interfaces normally and well with WSJT-x and FLRIG. Icom radios do have a one USB cable, as

#band #AudioIssues #Icom

Hi Everyone, I have been using WSJT-x for years with several different radios. Just got the IC-705 and am able to have CAT control and decodes just fine on RX. However, when I TX I am getting an Audio

#band #AudioIssues #Icom

Hello Everyone, I have had the FLEX 6400 and 6300 for years and this is the first time I am having this problem after making thousands of contacts. It just started recently...When transmitting, I will

#transmit #FlexRadio

Good Evening All, I have been operating WSJT-x for years and have not had this problem before. My FLEX 6400 just started defaulting to LSB on TX on all bands. I am not having the same problem with FLD

#FT8 #transmit

Hi Bill, Absolutely correct…Problem solved! Thank-you. 73 Mark

Hi Bill, I start WSJT-x from the desktop icon. I have the software on 2 other computers with this problem not occurring. 73 Mark

Greetings All, Each time I start WSJT-x, on one of my computers, the software goes through the install protocol as if it is a new to my computer. When it does finally open, all of my configuration set