Bruce- I run an FT450 under Windows 10, using a Signalink here are the radio settings: cat rts =enble cat tot= 3000 cat rate == 38400 wsjt side 38400 8/none/1 dtr off rts on ptt vox mode data/pkt spli

#Yaesu #Cat_RigControl

Rich- that's not a rig control error. It relates to the sound card. make sure wsjtx is still looking at the signalink under file/setting/audio. mine (also signalink) says input: microphone (usb audio

#wsjt-x-crashing

well you learn something new everyday. Thanks DAN KC2STA

#wsjt-x-crashing

What are EW EW1 EW2? Dan KC2STA

#wsjt-x-crashing

I tried this on a laptop not used for radio, as my radio pcs all have mainberg. It seems to work but is slow, at activation, time was -.7 seconds. After more than 24 hours it is at -.2 seconds. Dan KC

#Timesync

Check audio level from radio to wsjtx. Lower level is more yellow, higher more red. try to adjust waterfall gain. soundcard levels between pcs may be differentDan KC2STA.

#WSJTX_config #Waterfall

it is in 99.9% of installs. Dan KC2STA

#wsjt-x-crashing

Phil- you could set rig in wsjtx to DXLabs. Dan KC2STA suremail.gg@groups.io> wrote:

#Cat_RigControl

Gary -- same setup here, I use kenwood ts440, works fine. hope that helps Dan KC2STA

#Cat_RigControl

Every couple months I go to the ALL.txt file and rename it date_ALL.txt. Then I move it to an archive_ALL folder. A new ALL.txt file is automatically generated. The hardest part about this procedure i

#logging

ED Is DX4WIN maybe looking for an .adif vs .adi file? can you choose all file types on the import dialog? DAN KC2STA

#windows11

Jacob, on wsjtx help, select "keyborad shortcuts" for a list. Dan KC2STA gmail.com@groups.io> wrote:

#TechnicalHelpQuestion

perhaps he's mouseless. Some people prefer using keyboard to navigate. One you learn the key-combinations, it less annoying and faster then a mouse. Thanks DAN KC2STA

#TechnicalHelpQuestion

Marv- did you add the F?H frequency to the freq list? Dan KC2STA

#IssueReport

As Stan said earlier-- sudo usermod -a -G dialout stinkyfeet and press enter. You will have to logout and log back in. Hopefully that will get you going. Dan KC2STA

#NewUser

Make sure you are a member of dial-out group Dan kc2sta

#NewUser

Mike this might help http://pa0rob.vandenhoff.info/linux-ubuntu DAN KC2STA

#NewUser

hey Buffalo in wsjtx, file/settings/radio/split operation ,is rig set for "rig" or "fake it". tr5te he other setting. I use "fake it", which does not need a cat command. Dan KC2STA wrote:

#frequency

that should be returned - not retired Dan KC2STA wrote:

#hamlib

mike- the FT857 problem has retired, I am wondering if the hamlib files have become corrupted? This problem is recent, it has worked for years under many versions of WSJTX. By the way< my work around

#hamlib