Me and the WSJT-X community mourn the departure of Bill Somerville RIP ZL Bill Amos 4X4MF

#general

Thank you Bill Problem solved Amos 4X4MF

#JT65

WSJT-X v2.5.0 does show 3 different screens on 4 different instances of J65. See 2 below. Which one is correct? How do I get the right form? Decode is also different. Amos 4X4MF

#JT65

Bill 1. WSJT-X accepts the IQ stream it does create almost similar FT8 results as the base band. 3.1 I am using an H/V Yagi with symmetrical horizontal and vertical 10 by 10 elements on the same boom.

#Q65 #map65 #FlexRadio #Windows10

I have recently discovered that WSJT-X v.2.5.0 does accept the DAX IQ RX audio channels of my Flex 6600 instead of the DAX Audio Rx I did use for years. 1. Does WSJT-X take advantage of the additional

#Q65 #map65 #FlexRadio #Windows10

FT8 Fox and Hound have become very popular lately but it has a problem: My calls for J5HKT yesterday and today on 7,10, 18 Mhz does last about 2.5 minutes. Enable Tx becomes Halt Tx. This in in contra

#FoxAndHound

Pete I use Flex Radio 6600 SDR with 4 instances of WSJT-X. Receiving on 4 bands and transmitting on 1 band at a time. One could receive on 4 separate modes like SSB, CW, PSK36, FT8. Amos 4X4MF

#SDR

Thank you Tim Very good idea. I will try it when I put my Yagi on the new rotator. Amos 4X4MF

#JT65

Bill Thanks for your help. 1. I am planning to go EME in the next few weeks. I have to install my yagi on a moon tracking rotator. 2. I am trying to verify my hardware by receiving something on 2m FT8

#JT65

I am trying hard to work on 2m. FT8 does not function here because of severe interference on 144.175 MHz. Trying JT65A on 144.120 Mhz, I get the following: What's wrong here? I am using Win 10. and WS

#JT65

Bill Thank you, it does work OK now. Only that nobody did tell me that it does take all the capabilities of my Flex 6600 for itself. MSK144 does work OK with 1 PanAdapter and does create an additional

#MSK144

Setting the split operation on MSK144 according to instructions. Setting the spinner control to say 100 and frequency to 144.360. Checking the box does create CQ 360 4X4MF KM72 and Rig Control Error.

#MSK144

Karl My strategy with JT65 and FT8 in the last 5 years was to listen on the default frequency on each band and QSO all DX stations that cam in. This simple strategy did give me DXCC 250, 8 band DXCC a

#Q65

2m FT8 is dead here because of severe interference on 144.174 Mhz. Can Q65 replace it? Is Q65 15A equal or better then FT8 for terrestrial and Troposcatter work? What is? A default frequency for such

#Q65

Joe and Bill I did forget: A default Q65 frequency for each band is needed too. Amos 4X4MF ===== Joe and Bill I am also interested in working Q65 on 2m Please define a default Q65 sub mode for each ba

#Q65

Joe and Bill I am also interested in working Q65 on 2m Please define a default Q65 sub mode for each band for new comers use. Amos 4X4MF

#Q65

Looking now at PSKReporter of JT65 on 2m I find stations reporting: ,, 144.114, 144.116, 144.117 144.120, 144.121, 144.122, 144.127, 144.128, 144.133, 144.134, 144.170, 144.181. What are the official

#JT65

Alan Your hint is very interesting for me. Is there a documented way of how to use the FCD Pro+ with MAP65 v3 and dual polarization? Amos 4X4MF

#map65

Mack Thank you for your advice. The interference is not local. It is all over the country. Amos 4X4MF

#FT8

Roger Simple logic No proof of a disaster was given! Amos 4X4MF

#FT8