This is still happening. I've upgraded the IC-7300 FW and was hoping that would resolve it, but it didn't. I've started hitting "Halt TX" after doing a band change - as was suggested by one commenter.

#FT8 #AudioIssues

Yes it does. In fact I always click tune then halt when I change bands. The "Tune" works fine, it just sends no audio on the first TX after that.

#FT8 #AudioIssues

I've also noticed - since 2.3.0, that my radio's MIC is hot whenever the radio is in TX mode. That wasn't happening before either.

#FT8 #AudioIssues

The Halt TX and enable works, but shouldnt have to do that. RDR

#FT8 #AudioIssues

All of this information has been provided in this topic. Here is what we've provided: Rigs impacted - that I'm aware of: IC-7300 FT-891 Elecraft K4 IC-9100 IC-7410 wsjt-x Version: 2.3.0 Settings have

#FT8 #AudioIssues

Answers to the questions - and / or comments: Do you Stop monitoring and Halt Tx before a band change? > No, I didn't need to stop monitoring in prior versions. I never change bands during a TX so the

#FT8 #AudioIssues

I just verified that, indeed, doing a "Halt Tx" and then "Enable" during a TX window will restore audio output. Sorry, I hadn't tried that thoroughly before. W0RDR

#FT8 #AudioIssues

I only change during receive - it wouldn't make sense to do it in transmit. The connection is exactly as it was with 2.2.0, the ONLY change was to upgrade to 2.3.0. I'm using an Icom 7300 with a shiel

#FT8 #AudioIssues

When this has occurred for me is when I change bands while receiving, just using the band selector dropdown in the lower left below the received station window. The radio changes bands but when I atte

#FT8 #AudioIssues

After changing bands in 2.3.0, there's initially no audio on TX. No other changes were made during the installation except the installation. I'm using an IC-7300 - internal sound card. I've disovered

#FT8 #AudioIssues