Donald you can use the ADIF Master freeware to browse your ADI file and make manual or automatic repairs (file checking or for defects, missiong EOR etc). Very nice utility. I also use TextPad or Note

#adiFiles

I use a Rigblaster Plug and Play for my FT-818. It is really plug and play. Has a 6 pin mini-din connector to the 818 side and to the laptop, a USB cable for CAT control and two 3.5mm audio cables for

#Yaesu

John VK6FD might simply be working someone who is using JTDX that unfortunately reports 15dB lower signal reports because of different "thinking" on behalf of coders... And I am happy to complain abou

#FT8

What I have done is to carry on listening to those who never send confirmation. Well guess what. John N4QWF is right. They do the same with everyone. And I have seen this on stations that were strong

#QSO_practices

The extra characters is the UDP port number Dave. Not to be worried about. Talking on port 2237 But the address is weird though..... 224.0.0.xxx !!!! That is not a loopback address that should be in t

#wsjt-x-crashing #Windows08

Listening here in Canada from Quebec city FN46 with 4 element beam pointing to UK IO90 All HF bands are dead anyway and will be noisy anyway with major storm to begin around 22h00 UTC with 5cm of snow

#Beacons

Very nice utility Mike W9MDB. Thanks so much. I wanted such tool so badly.

#Timesync

This reminds me of good old Windows NT4 running on Industrial PC's used on Canadian Coast Guard hovercrafts ECDIS systems. Same bug. If you booted the PC with GPS already running using the serial port

#Windows10 #Timesync

If possible would there be a way to set the RX freq with perhaps a left click and the TX freq with a right click of the mouse. Or something similar. ---Thanks, ---Gary The right click/left click would

#AudioIssues #Waterfall

I welcome my 200 watts of RF out to punch through poor 6m conditions. That's when brute power is needed. Otherwise on HF I am amazed at QRP stations.

#transmit

Bill G4WJS you were right and I was wrong. Indeed constant enveloppe signals may be amplified with class C amplifiers. There are no amplitude components in the FT8 modulation. There is a nice short ar

#transmit

Everyone is blinded by the word "FSK tones" and assume a class C amplifier will work... It won't. We are broadcasting 8 different discrete tones simultaneously (8-PSK) and that won't simply pass throu

#transmit

Have you simply tried to reboot the PC ? Just in case socket communications (UDP messaging) has been stopped or corrupted in some form. Reboot your PC and will likely resolve the issue. You could inst

#WSJTX_config #networking

I have this. A cut/paste table from various sites. Far from complete I guess but a start. 73 Michel

#Q65

Fine Hasan thanks. Will merge and submit it to you for comments since this is your creation. Will do that next time it rains. Now is BBQ time for the next 3 or 4 days since nice weather finally shows

#Q65

Thank you Hasan for posting these notes. I copy/paste those into Word (or Libre Office Writer) as Q65 hints. It would also be interesting to mention if this is posted on a Web page somewhere or which

#Q65

Wi-Fi not working anymore... maybe this is one of the reasons. Do you see the Internet now through cabled network ? If not time sync will block solid. Review the device enumeration through "windows pe

#Windows10

I switched to an Intel i9 processor. Problem solved. For a while... The real problem being there are now 9 zillion signals to decode at every cycle as every ham on earth join the fun club. My i9 will

#WSPR

Use JTDX Al ! I have an FTDX5000 and this never happened to me after 7000 QSO's

#FT4

Joe is correct. Using SPLIT mode is the best solution. Then you don't have to fool with internal audio bandwidth settings of your set. Let WSJT or JTDX shift the transmit frequency during transmit usi

#WSJTX_config