Hello YO8BCA, One answer. I have Flex5000 and use NO cables. All cables are now virtual (software cables) Cables. Control, audio, PTT, CAT are all virtual. 73, Bruce, W8HW ============================

#transmit #WSJTX_config

Hello Scott, You are melting the solder on your finals. That is one of the reasons (but not the only reason) why the power output is becoming intermittent. Never run your rig at full power using digit

#WSJTX_config #transmit #AudioIssues #FT8

I am interested in this issue. My first guess would be Receiver settings. Most kinds of problems like you report revolve around the issues below. Most people are not aware of the affect these settings

#FT8

On 1/23/2021 5:23 PM, Bruce wrote: It sounds like it could be RFI getting into you audio cables. Eliminate that by doing a simple test. Reduce your FR power as low as your radio will go and see if you

#AudioIssues #FT8 #signalink

It sounds like it could be RFI getting into you audio cables. Eliminate that by doing a simple test. Reduce your FR power as low as your radio will go and see if you still have the problem. If problem

#AudioIssues #FT8 #signalink

Ror NA, 160 just starts to open at 2200z. Could you please run later? I thank you in advance. Bruce, W8HW in Florida, USA

#FT4

Hello John,, If no one has helped you, I believe that I can fix your file for you. I will need you to email two WSJTx files to me. If you give me your phone number to my direct email (w8hw@...

Hello Chris, You are correct, this is not software issue but a hard ware issue. Because you did not give much information, I will start with the basics. Trouble shoot both the cable and radio by check

I have almost 12,000 in my WSJT log and it is working fine. Granted I have much more than that in CW, RTTY and some SSB using N1MM, but WSJT log seems to be doing fine with quick response. Hope that h

C U on CW... 73, Bruce ========================

You are seeing RTTY contest, Yes they have the right to do so.