Not necessarily, The ARRL suggested different FT freqs in the past because of the terrible confusion that happens when NON FD people try to work you. so contesting was often placed somewhere else so n

#frequency

That's why I always confirm against WWV if I make mine make an adjustment. Joe WB9SBD

#Timesync

I said internet delays, and that changes by the moment, so any adjustments will be no good secods from now. Joe WB9SBD

#Timesync

I have tried several and this one I have found to be the best http://www.timesynctool.com/ When I listen to WWV, so I do not have to worry about any internet lag times, it is the one that has been the

#Timesync

you should try. but it is NOT necessary! Honestly Joe the maker of this incredible mode says the same thing. you can have almost completely overlapping signals and not effect either one. the mode is s

The other thing is that would be a HUGE waste of THE FREQUENCY . They don't HAVE to have clean air. you can literally have two stations only 5hz apart and work them just fine! I have had a -20 station

I agree with the larger station. When I did EME it was in the late 80's none of this incredible software it was CW and all by ear. I never ever heard my own echos. but I still did work off the moon pr

#adiFiles #Echo

When a station is CQing, and say three stations answer the CQ. What makes the software answer one station and not the other two? I know in old school like CW pileup calling a station, there are severa

In a FTDX-5000MP, How much power can we safely run in the high duty digital modes? Like RTTY and the stuff in the WSJT-X magic box. My old Kenwood TS-430S 100 watt rig, 100 watts OVERHEAT Like 50 watt

#txaudio #Yaesu

I just re-built my computer and did a fresh install of the latest WSJT-X. I got on and made a few FT-8 contacts on 15 meters to make sure all is working and it made contacts. But when i went to look a

#logging

I do not know if it is a WSJT-X or a FTDX-5000 setting. I'm trying to set this up and I can recv just great on USB, But when I go to Transmit something is telling the radio to go into PKT mode. Is thi

#Yaesu #Cat_RigControl

I looked there, but I can't even find it in the program... Joe WB9SBD

#Q65

Can someone send me a Link to where I can learn about this "Q65"? Joe WB9SBD

#Q65

myself I would not even worry about them, They are taking up less than 1% of the band, not hurting anything at all. Joe WB9SBD Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.id

There is something else wrong. Those spikes are not all that strong PLUS you have room for 100 signals in-between each of them. Reason for no decoding is, I don't see any signals to decode! Joe WB9SBD

PERFECT! And I might add, What power level you can run is 100% determined by how well you can get rid of this heat being generated. Example. My Kenwood TS-430S I can run FT-8, RTTY, etc. at full outpu

But the tone MCW a single tone of 1KHz on a signal dial freq of 14.200 to anyone listening hears a solid carrier tone of 1 Khz in frequency. It is exactly the same power use. Joe WB9SBD

exactly!

60 minutes on, 60 minutes off is then also 50% duty cycle? Joe WB9SBD Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com

How narrow is a dead carrier? a LOT smaller than 50 hz, so how long can your rig like a CW Key be pressed down and held? Joe WB9SBD Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://w