Hi Pete, the only serious errors there are a failure to connect to DX Lab Suite Commander, or something that emulates that like the N1MM Logger+ WSJT-X interface module. Are you attempting to run WSJT

#wsjt-x #IssueReport

Hi Guillaume, sent signal reports are no longer automatically changed during a QSO, this is to avoid any confusion about the report sent when messages are repeated, and for effective message averaging

#QSO_practices #wsjt-x

its been that way as long as I remember. only jtdx erases left windows first Dave Garber VE3WEJ / VE3IE

#wsjt-x #IssueReport #mainscreen

With the IC-7300, up the gain until the ALC meter is showing at about 35%. At that pint, changing the rig USB gain still changes the power output. My settings are WSJT-X output at maximum, Windows at

#wsjt-x #Yaesu

Thanks everyone, JS8Call seems to be the solution for what I was looking for.

#EnhancementReqest #wsjt-x

Hi Willie The easiest way to get the SDR going with WSJT-X without disturbing any existing program instances dedicated to other radios is to follow the instructions in the WSJT-X manual regarding mult

#wsjt-x #WSJTX_config #radio

What what error is in the "Details" of the WSJTX error box? Mike W9MDB

#Icom #wsjt-x

Hi Nick, filter 3 on the IC-7300 is only the RX filter. The TX filter is normally fixed as a wide filter. Have you set filter 1 on the rig? I don’t think WSJT-X changes the filter setting, just the VF

#wsjt-x

Strangely the same thing happened to me today, during the CQ VHF contest, of course! My waterfall is blank and I see no signals. But I was transmitting deaf and got reports 100 miles away. My netbook

#wsjt-x

My bad. I hadn't noticed the little block to the left of the display. All is well now. Many thanks. 73, Jim

#wsjt-x

OK, Bill, Well, it's a pitty ! Nevertheless I missed it ! Thanks a lot, 73, Karl Am 12.07.21, 00:37 schrieb Bill Somerville <g4wjs@...>:

#WSJTX_config #wsjt-x #JT65

I have loaded WSJT-X 2.50 rc3. The 2 second TX delay issue with the K3 has been fixed. All seems well now! I will address the sound card driver updates and MAP65 updates a bit later as I am waiting fo

#wsjt-x

Hi Lloyd, there is less complexity than some would have you think. For IQ+, or similar USB controlled SDRs, users we have switched to a newer generic USB control library and the old libusb0.sys driver

#wsjt-x

Bob, that os not correct, MAP65 is a digital modes program in the same way that WSJT-X is. It utilizes the JT65 and QRA64 modes for wide band decoding of EME signals. The upcoming v2.5.0 WSJT-X releas

#wsjt-x

That works. I recall you posted a similar response on the WSJTX group thread before they moderated the responses (aka deleted them without notifying the senders) and locked the topic. The keyboard ent

#wsjt-x

Al, "the current version of WSJT-X" -- Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 https://www.grammy.com/grammys/artists/dennis-wage/252054 http://overdubs.n

#FlexRadio #radio #wsjt-x

And adding and deleting callsigns from the list is as hard as entering the callsign, clicking on the ADD button, or highlighting a callsign, and clicking the DELETE button. Hardly 'time consuming" Nei

#wsjt-x

>the wsjt freq window turned red. Mike, No problem, as the QSY frequency was not defined as a working frequency for the band/mode. I think that it is just a reminder. 73, Reino OH3mA

#FT8 #wsjt-x #QSO_practices

That station is an IOTA expedition with some very experienced operators. It’s a rare island, QSY! https://na-234.com You will see FT-4 and FT-8 around 7.047. They’re also very near the boundary of reg

#FT8 #wsjt-x #QSO_practices

Overload anywhere the signal is audio will generate harmonics and intermod. This can happen between the detector in your radio and the WSJT-X decoder, and between the other station's WSJT-X and his SS

#wsjt-x