Hi Ronald, have you tried any of the options recommended in the Quisk user manual? https://james.ahlstrom.name/quisk/docs.html#Hamlib 73 Bill G4WJS.

#raspberryPi

Hello. I have same problem with same library in Ububtu 18. I had wsjtx 2.1.2 running fine on ubuntu 18. Then I went to update to 2.3.0 and it just never launched, although icon was there. I did uninst

#install #raspberryPi

Thanks. Some other sites suggest this type of fault can occur if FLrig doesn’t return a string when a string is expected. https://www.unix.com/programming/264509-segment-fault-related-strlen.html

#linux #Cat_RigControl #IssueReport #raspberryPi

Hello! It worked when I copied the "WSJT-X.ini" file to "WSJT-X - 7300.ini" and "WSJT-X - 9700.ini" in the .config folder. I was not aware of those files were existing O:-) Thank you so much! Jaime, E

#raspberryPi #WSJTX_config

Thanks Bill, I replaced the ADIF file in wsjtx with the ADI file from qrz.com and that seems to show the existing QSOs as green. Much appreciated.

#FT8 #raspberryPi

First install on RPi4 B 2Go with PiSDR image With same settings and same udev file for FiFi SDR JTDX rc155 works fine. WSJTx throws error, see picture

#IssueReport #raspberryPi #Cat_RigControl

Better example C++ https://developer.nvidia.com/blog/even-easier-introduction-cuda/

#WSPR #raspberryPi

HI Bill - thanks for your reply. I deleted the .ini file, scrubbed everything else out and rebuilt 2.2.2 - came up right away. FYI, there's another guy on the list who had (what seems to be) the same

#AudioIssues #raspberryPi #txaudio

Hello all, I have been running Raspbian 10 on a Raspberry Pi 4 for months without issue. This morning, I discovered that the TX audio in WSJT-X has stopped working. Previously, I had it configured via

#txaudio #linux #raspberryPi

Normally, if you are working MS, it is understood that RR73 will not be used. It is the nature of MS that the other station will possibly, or even probably, not receive your RRR and you’ll need to rep

#raspberryPi #IssueReport

Thanks for the replies! I have set my radio to 'None', so I am able to run manually. Will look at some CAT solutions for sure. I ran into another issue but will make that a separate thread. Thanks aga

#signalink #raspberryPi

Hi Karl, yes that's fine. If you installed from the Debian package we provided then the uninstall instructions are in the WSJT-X User Guide. 73 Bill G4WJS.

#raspberryPi #install

Hi Brian, For CAT and PTT I have a Prolific USB-> RS232 konverter. Rasbian-buster installs it as /dev/ttyUSB0 and this works well (most of the time, except when the error comes up). for PTT I use the

#AudioIssues #raspberryPi #Cat_RigControl

Sorry Carlos, I assume EVERYBODY uses Windows...

#WSJTX_config #raspberryPi #install

Ok,fine. Thanks a lot, Bill !! Am 02.03.21, 20:13 schrieb Bill Somerville <g4wjs@...>:

#raspberryPi

David, to be able to use the "Test CAT" button, so far you have not confirmed you have a CAT interface connection with your rig. If you do not have a CAT connection to your rig you must select "Settin

#raspberryPi #WSJTX_config

Hi Bill, I realized what I did after posting. I purged what I installed and downloaded the 64-bit Ubuntu version that didn't work. So I opted for taking the SD card out of the old Pi and sticking it o

#install #raspberryPi

Been using rc1 since release. It’s a minor issue but I need to resize the windows each time I open the program or change configurations. I haven’t seen this reported thus far and seem to remember that

#raspberryPi

Hi Bill, Many thanks for your very fast answer. I tried : sudo sed -i "s/# en_US.UTF-8/en_US.UTF-8/g" /etc/locale.gen sudo locale-gen And it perfectly works ! I'm subscriber to this group since today

#raspberryPi

Hi Bill No I didn't.... Starts fine now Many thanks as usual. Greg g4cui

#raspberryPi