No, what I meant js that the WSJTX either resolves the libraries, or (being a source build) does not care and uses what you have. Again, just because a prepackaged build used a certain set of librarie

#install #raspberryPi

FYI I'm using WSJT-X 2.5.4 GA under Ubuntu 22.04.1 LTS. I's no problem at al for Low frequency.

#install

On the topic I’d shared memory… I’m running two instances of WSJT-X on my MacBook Pro (M1 Max processor, 64gb RAM) with no issues. I’d like to run a third for another radio on the bench, but I haven’t

#install #macOS

OK - much trial and error, I am convinced this is a driver issue but I am not familiar enough with the innards of Windows 11 so I am at a bit of a loss here. HOWEVER I did go into the automated troubl

#install #windows11

Please ignore my last post. I've solved the problem

#install #macOS

What rig are you using? Have you installed the USB to UART drivers for the radio?

#install #macOS

This is what I meant. It comes in the dmg download. "If you have already downloaded a previous version of WSJT-X then I suggest you change the name in the Applications folder from WSJT-X to WSJT-X_pre

#install

Wes, there's something strange going on here. The Raspberry Pi 64 package on the WSJT-X website claims to be for PiOS Buster, the version before the current PiOS Bullseye. Given that PiOS is essential

#install

Hello, We recently encountered an issue with running WSJT-X on high resolution displays where the Waterfall window could not be expanded beyond a certain size (about 2000 x 900 pixels). On a 4k displa

#install #Windows10 #Waterfall

I already posted this info on the VARA-MODEM area, but thought this might be of use over here also. This can happen with any two programs accessing your radio using a virtual USB ComPort. Just in case

#Icom #install

Downloaded that version on my win10 laptop. Having had seen the little safety hurdles many times b4, I knew how to by-pass them and they never stopped me. Ran that version in Field Day, 24 hours and d

#install

I'm running 64bit Manjaro linux on a Raspberry Pi and all works well, but Wsjtx installs as dark mode which is fine EXCEPT the colors are useless. Wsjtx chooses a white color for the text which is alm

#install #linux

Martin, Thanks. You are right. I was being fooled by the profile folder in C:\Users\dell\AppData\Local\. Looking properly I realised it was not a folder but the link, sending me to my new folder on E:

#install #Windows10

_________________________________________________________________ $ make [ 61%] Built target hamlib-install [ 61%] Performing build step for 'wsjtx' [ 68%] Built target wsjt_cxx [ 68%] Built target ws

#linux #install

"Richard ORourke" <rickorourke@...> wrote: You need the qt5-qtserialport-devel package installed

#install

"Richard ORourke" <rickorourke@...> wrote: You need to install boost-devel The names wsjtx is using are because it is developed using Debian-style library names. Fedora uses different names so y

#install

"Richard ORourke" <rickorourke@...> wrote: The package you need is named: qt5-qtserialport HTH

#install

I can’t seem to get a serial port parameter to show up on the radio preference section. I get only USB. The mac book air appears to see the Yaesu FTDX10. But no serial port indicators to select. Any i

#install

here I got success with sudo groupadd mymainuser audio after that everything works (also for js8call) 1 as "mymainuser" submit command "groups" 2 control if group "audio" is in th list 3. if not usbmi

#AudioIssues #install #linux #WSJTX_config

Fatal error Failed to access lock file. Hi Bo, May I assume that you have successfully installed wsjt-x and try to run it, but get the lock file error. Most probably you have a jt9.exe running and tha

#install #Windows10