The most reliable way to disable PTT keying from the SignaLink is to simply disconnect it's PTT output to the radio's PTT line.

#Cat_RigControl #Ten-Tec #signalink

Jim knows what he is talking about. +1 Bob - wd6dod and don't get me started on HRD.

#Cat_RigControl #Ten-Tec #signalink

The SignaLink-USB provides its own PTT line to the radio. It is like VOX in that it asserts PTT when it detects digital audio tones coming from the computer USB. When using the SignaLink PTT you must

#Cat_RigControl #Ten-Tec #signalink

Some givens. Fi8rst, VOX is a perfectly good means of generating PTT with digital and voice modes if your rig supports it at line level inputs. I've used nothing but for hundreds of thousands of SSB,

#Cat_RigControl #Ten-Tec #signalink

Bob, Ed specifically stated in his OP that he had VOX disabled on his rig. Nothing I said suggested turning on VOX on his rig, in fact I only stated that "Settings->Radio->PTT Method->VOX" should norm

#Cat_RigControl #Ten-Tec #signalink

Reino et al: In my experience when the term VOX is used, it applies to that circuit and function in one's radio. At the same time, the Signalink does not have any knobs, buttons, labels, or such indic

#Cat_RigControl #Ten-Tec #signalink

I would NOT suggest running with VOX enabled on the radio. Why? Hi Bob, Perhaps you should read Bill’s mail again. He is not talking about VOX on the radio, but WSJT-X setting VOX as PTT Method, if Si

#Cat_RigControl #Ten-Tec #signalink

While I respect what Bill suggests, I have an Eagle, Signalink, and run WSJT-X on a Windows 10 machine. I control the radio direct with WSJT-X. I would NOT suggest running with VOX enabled on the radi

#Cat_RigControl #Ten-Tec #signalink

I have seen many times Windows reporting a com1, and even com2, when they do not exist. if you are using a signalink, set ptt to vox on software. the signalink will ptt, if wired correctly. there is n

#Cat_RigControl #Ten-Tec #signalink

Hi Ed, thanks for the update, glad you are up and running. 73 Bill G4WJS.

#Cat_RigControl #Ten-Tec #signalink

Thanks to Bill's help I'm up and running. Thanks Bill !! Ed

#Cat_RigControl #Ten-Tec #signalink

Hi Ed, if you are a DX Lab Suite user then you can use Commander as a rig control proxy, simply select "Settings->Radio->Rig->DX Lab Suite Commander" to enable that. If you want to control your rig di

#Cat_RigControl #Ten-Tec #signalink

Bill, One step forward! I can control the Eagle via DX Commander over COM3 (USB port). Same setting not working through WSJT-X. There should be a clue in there somewhere. 73 Ed

#Cat_RigControl #Ten-Tec #signalink

Hi Ed, yes that is how it is supposed to work. Normally virtual serial ports over USB connections require drivers to be installed, but the Eagle manual states that is not required for the USB to seria

#Cat_RigControl #Ten-Tec #signalink

Bill, Still working on it. I changed the radio tab rig to the Eagle. Here's a basic question. Does WSJT-X "talk" to the Eagle via the Eagle USB connector and does it do so via a computer COM port? Bab

#Cat_RigControl #Ten-Tec #signalink

Hi Ed, the correct rig model to select for "Settings->Radio->Rig" is "Ten-Tec TT-599 Eagle". 73 Bill G4WJS.

#Cat_RigControl #Ten-Tec #signalink

Hello, With WSJT-X I can receive audio from a TenTec Eagle and decode digital modes. However I'm unable to establishing CAT control. Changing frequency or band using WSJT-X isn't reflected at the Eagl

#Cat_RigControl #Ten-Tec #signalink

Team: Appreciate al the feedback. I was able to resolve the issue by installing the RT-Systems USB-64 - RS-232 to USB cable. However: with very little setup instructions(that I have found) I will be p

#Cat_RigControl #Ten-Tec

Tony et al: Yes, I purchased my RS-232 to USB converter cable from RT Systems being their model number USB-RTS03. You will need to add a USB to USB extension cable as well. Yes, in the WSJT-X applicat

#Cat_RigControl #Ten-Tec

Thanks Bob for the feedback. I agree with all of your recommendations. Do you have a link to a good rs-232 adapter ? Once I add this cable, should I be able to select the Jupiter rig in WSJT-x or am I

#Cat_RigControl #Ten-Tec