Dave, I just got home from a trip. I am pointed your way, calling CQ on 2nd 50.275-30A on 1500 Hz. You or anyone is welcome to call. I'm running about 600w out to a 5 EL LFA @ 55'. It is 21:30z right

#Q65

If you are not using JTAlert, you are missing out on a great supporting program. Download it at HamApps.com Among the many things it does is provide an activity window that shows HF/VHF digital activi

#Q65

And remember that Q65 does averaging, which to some extent can offset the disadvantage of shorter TX periods. 73, Jim K9YC

#Q65

Not a peep out this way... I had mine in monitor mode, and nothing... Jim, Thanks for the additional info! 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Speci

#Q65

Hello. Is it possible to suggest (explain) the decoding algorithm of the "Q65" mode in bits? that is, I have a bitstream that I received during demodulation, how can I turn it into transmitted text in

#Q65

Hi Rick, when reporting an issue it is essential that you state which version of what application you are running. Also error message boxes that include a "Show Details ..." button contain extra impor

#Q65

One of the handy things about FT8 is that the Auto Sequence steps right down to CQ so that can be the next message you send when you finish a contact and re-enable TX. Q65 seems to stop the auto seque

#Q65

WSJT-X 2.5.0 RC3 Test Results (Q65-30A 50.275) (Data below represents a snapshot of a long test run from this morning. Conditions were normal to below normal based on our prior months of testing.) Dec

#Q65

Hi, Bill, No WebSDR here ! Q65 is not very often in QO-100. Most of the Signals can be easily decoded, but some NOT. My enclosed wav files are of them. My RX path is: LNB, dxpatrol down converter-144M

#Q65 #wsft-x #IssueReport

Everything you need to know is on the WSJT-X website. Look for the Quick Start Guide to Q65, and STUDY it. 73, Jim K9YC

#Q65

Hi, help or advice please. Not new to WSJTX but new to trying to operate Q65, using 2.4, Listening on 50.305 Mhz after a couple of cycles the Decode indication comes on and stays hard on! Checked reco

#Q65

The generally accepted definition of Mobile is that it can be operated in motion. A Rover is generally defined by the rules of contests and/or awards as someone who operates from multiple contest/awar

#Q65

Hi Joe, I also noted that Q65 behaves differently than the other modes in the 77-bit family. Q65 leaves out my call e.g. in message “WB7LYJ/R OH3MA 73”, when it automatically generates that message re

#Q65

Sent this earlier, but hasn't yet shown up, so trying again. I worked WB8LYJ/R in grid FM25 on 6 meters Q65 at 50.275 Mode 30A. Received his RRR but then WSJT-X version 2.4 sent "WB8LYJ/R 60" rather t

#Q65

This morning I worked WB8LYJ/R on 6 meters Q65-30A. Got the signal report and the RRR but when WJST tried to send 73 instead it sent "WB8LYJ/R 60" Image of QSO attached. I tried various free text mess

#Q65

I have this. A cut/paste table from various sites. Far from complete I guess but a start. 73 Michel

#Q65

To be fair, it's poor transmitter design. It shouldn't be the job of software to have to be set for this. A properly designed transmitter, if it is going to be susceptible to low drive level, needs to

#Q65

Hi Steve, Your file 210607_1206.wav decodes perfectly with WSJT-X in mode Q65-60C: 1206 -18 2.6 1264 : CQ SM4GGC JO69 q0 Your other three files also decode perfectly, but the signal is mode JT65C rath

#IssueReport #Q65

Hi Peter Yes, I saw your posting earlier...an interesting thread. I am not sure I understand what the reasons are for the ramp up and down. My interest in Q65 is really for VHF and up, where Class D a

#Q65

Hi Bill, Thank’s for clarification that the ”instant” full power is available only for FST4(W). I would like to know how fast amplitude is rising for Q65 modes as the same issue could be possible also

#Q65