2018 Intel Mac Mini running Monterey 12.5.1 macOS has always had a problem with multiple monitors, and I've just about given up spending any more cycles trying to figure it out. When I had three monit

#NewUser

That isn't my experience. Once my 73 is finished sending, I double click on the second caller, and we go directly to tx2 which does not have the grid.

#NewUser

BUT the monitor where I run wsjtx is the #1 for Windows, the main is the #2. May be this is the trick... I never try with a different monitor... may be Winsozz! I2OIM <pietro=pietromolina.com@...

#NewUser

It isn’t supposed to automatically reply to a caller. However, due to requests to do so, there is a way to do it. Just to the right of the Auto Seq check box, look for CQ, look there and check the Fir

#NewUser

It’s better than that. Several times over the last few years, I’ve decoded two stations on the exact same frequency (according to the decoded line readout). I first started seeing this on JT65 in the

#NewUser

Well, tried the TS-480 selection again, and it's much worse, with "unknown command or rig busy" and many errors about every command... Also, it seemed sluggish in control, and it took several seconds

#NewUser

If it is in the manual please lead me to it, I cannot find reference to it anywhere. Hi Marv, Perhaps the best section in the User Guide is 11. Logging. All that information is added locally at recept

#NewUser #Timesync #mainscreen

Hi Martin, Yes I have auto seq checked and it does prompt me to log at the end of the qsl. My problem is we just keep going back and forth trying to complete the signal report exchange for it to move

#FT8 #general #NewUser

Hi AL, just an observation, not all POTA's give the parks or grid location , just their home QTH. Which I guess could be in a park. Robert W6ino W6INO ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Twenty years from now

#NewUser

Hi, Generally there is no need to install wsjt-x using admin privileges. Actually it is a security issue and may prevent usage of any companion program. I have not really tested multiple user case, bu

#Windows10 #TechnicalHelpQuestion #NewUser

Frequency accuracy very important on MS. Initially set your TOL to max wide and try and make sure your partner and you are on the same frequency. Random CQ’s are almost never worth it. Run skeds all t

#MSK144 #NewUser

Just after posting I realized that, if AA7AA was a station that I really wanted to work badly for one reason or another, then I would certainly ignore BB7BB for a while, while I try to work the desire

#NewUser

Thanks Joe K1JT that answers the question. The link has also been restored. The thread can be closed for my part to avoid further spam. Ger PA2KOP

#NewUser

Link is working now, here. If you need the pdf I can mail it to you. Pietro I2OIM

#NewUser

Thanks for the answers. However for some reason (unbeknownst to me) when I went back in to the WSPR app all of a sudden it allowed me to change the info.

#NewUser

Bizarre, whilst display :1 VNC Session doesn’t show the “alsa_output.usb-BurrBrown from Texas….” Devices in the Audio drop down tab of settings, it appears that “hw:CARD=CODEC,DEV=0” works in both the

#raspberryPi #NewUser

I use WSJT-X -> File -> Settings -> Colors Chuck

#NewUser

when windows tries to open ( first time) an adi file, if one is not assigned, ususally you can select 'open with' and we can use any editor you like ( with a minor issue. it saves as txt not adi, so r

#logging #NewUser #macOS

Hello everyone. I had a lengthy thread with you guys trying to help me to get my Yaesu FT-991A to transmit and I finally have it working. Long story short is I had it working and then it stopped and I

#Cat_RigControl #macOS #NewUser #transmit #Yaesu

Hi Robert, I have a FT991A but don't use it on FT8. I use it on VHF bands. 1st check & see if your rig is actually transmitting ok. Plug in your dummy load to the HF out connector, select a band (like

#Cat_RigControl #NewUser #TechnicalHelpQuestion #transmit #Yaesu