Thank you Bill Problem solved Amos 4X4MF

#JT65

Hi Amos, The "Settings->General->Enable VHF and submode features" enables the wider mode options where available. As you are tuning to 144.120 MHz I guess you are looking for EME contacts, unless you

#JT65

WSJT-X v2.5.0 does show 3 different screens on 4 different instances of J65. See 2 below. Which one is correct? How do I get the right form? Decode is also different. Amos 4X4MF

#JT65

Thank you Tim Very good idea. I will try it when I put my Yagi on the new rotator. Amos 4X4MF

#JT65

Amos, You might try receiving the GRAVES French space radar system on 143.050 MHz. I was not successful with my 2m EME rig last year (long story), but I did manage to receive this radar signal. Of cou

#JT65

Bill Thanks for your help. 1. I am planning to go EME in the next few weeks. I have to install my yagi on a moon tracking rotator. 2. I am trying to verify my hardware by receiving something on 2m FT8

#JT65

<snip> Hi Amos, JT65 is normally used on 2m for EME, are you trying EME? There is nothing wrong, except that there are no signals to decode. The JT65 decode in VHF and up mode will indicate sync detec

#JT65

I am trying hard to work on 2m. FT8 does not function here because of severe interference on 144.175 MHz. Trying JT65A on 144.120 Mhz, I get the following: What's wrong here? I am using Win 10. and WS

#JT65

Hi Bill, Thank you for your patience. I have everything working but radio control. It seems the new Mac OS 11.5.2 with the M1 chip doesn’t recognize the driver. There is something about using applicat

#FT8 #Cat_RigControl #JT65

Ok Bill Thanks! I believe the radio manual references some drivers and I’ll get them installed. I’ll keep you posted!

#FT8 #Cat_RigControl #JT65

Hi thanks, now I have to look for some JT signals 73

#JT65 #JT9

Hi Mark, CAT control is separate from audio interfaces, you need both for full control of the rig. Looking at images of the TX-500 I see two sockets marked REM/DATA and CAT respectively. If you have a

#FT8 #Cat_RigControl #JT65

I do have the CAT cable for the radio that is a USB Connector. I’m using the audio cable and VOX and truthfully I’m not sure what the difference is. The sound card I have, Sabrent, has the 3.5 mm plug

#FT8 #Cat_RigControl #JT65

Hi Mark, do you have a CAT interface? 73 Bill G4WJS.

#FT8 #Cat_RigControl #JT65

Well first off thank everyone for helping me. I have the software running and am copying transmissions on the band. I can double click on CQ’s and if I enable the TX it appears to be sending. However,

#FT8 #Cat_RigControl #JT65

Panos, WSJT-X ships with a test application called message_aggregator, try running that an see if it receives the expected information when you are operating JT65 or JT9 mode. If it does then perhaps

#JT65 #JT9

Looks like JT modes are not in first priority, any suggestion? 73

#JT65 #JT9

Hi, when I work FT8 & FT4 both WSJT-X and Logger 32 cooperate flawlessly. But when on JT9 & JT65 the Logger32’s udp bandmap and udp message debug window remain empty although the qso’s where recorded

#JT65 #JT9

I’m using a Sabrent adapter for Mac and plugging the mike and head phone jacks to the Mic/Sp port on the TX 500. I have ordered the audio cable for the CAT port.

#FT8 #Cat_RigControl #JT65

OK I’ll give that a try and let you know. Thank you!

#FT8 #Cat_RigControl #JT65