That is data-USB. This is the right mode for FT8. Use the connector on the back to supply audio. Lev

#FT8

Hi Mark I also have a 6400 and have had similar - mine changes to LSB on 40m downwards - I think due to the turf file on the 6400 assuming that those bands are normally LSB. All other bands work fine.

#FT8 #transmit

I went back to 2.16.17 but eventually read the "JTAlert 2.50 features" Help file included with 2.50 (shown above). Adjusting some setting I am now pretty happy with what I have on the screen as I have

#FT8

Yep. I saw that after Laurie pointed it out. Thanks

#FT8

I understand the intention of the hashing. I am curious if the recent history can be passed, standalone, into the jt9 utility instead of relying on the WSJT-X GUI application.

#FT8

I am assuming that your rig goes into TX and you see power going out to the antenna. JoAnn AB8YZ

#FT8

I deleted 2.3.1 and re-installed 2.3.0 and am no longer having the rig control loss. 73, Bill NZ0T

#FT8 #BugReport #Cat_RigControl

>> Below are the usage recommendations copied from the Palomar Engineer >Palomar Engineering is hardly an authority on this. They are a MERCHANT. Hi Jim, What if that table is just compiled from manuf

#FT8 #signalink #txaudio

I entered and submitted my log. I received no acknowledgement. I could find no results from past contests on the web site. There is a link to archives but the only material I found there was announcem

#FT8

Palomar Engineering is hardly an authority on this. They are a MERCHANT. 73, Jim K9YC

#signalink #txaudio #FT8

Hi Rich, To me, it sounds like you may not be transmitting. I would start by calling CQ a few times and then checking https://pskreporter.info/pskmap.html for your callsign. If no one is hearing you,

#FT8

There is an explanation about color highlighting in wsjtx in the MANUAL SECTION 4.7 that will help with some of the issues of worked B-4 status. It seems to work for many but READ THE MANUAL :) This c

#FT8 #GeneralGroupInfo

Longtime WSJT/WSPR/Digimode operator here....not saying I'm an "expert" though! This is what works for me (Yaesu, Kenwood and Icom) and has resulted in a clean signal on FT8, WSPR, JT9, FT4, Q65, etc

#GeneralGroupInfo #FT8

Hello, Although I posted a new topic just before saw this..., maybe my issue is similar to this one. I am using an FTdx-10 and I have frequency shits of 55Hz and 700Hz when I use wsjt-x v2.3.0. I also

#FT8 #BugReport

Hi Ken, May I repeat that most of that problem is easily prevented by using Split either “Rig” or “Fake it”, if cat control is available. As explained in the User Guide during transmission audio frequ

#GeneralGroupInfo #FT8

I had to go back pretty far to find this issue, before writing it up as a new topic. I too, am using HRD as the CAT control and for logging, but I see the same issue of "Fake it" no longer working als

#FT8

Thanks for your comments, Reino. As in previous NRAU NAC contests the "File - Settings - Advanced" setting is set for "Special operating activity" and "EU VHF Contest". The contest stations were using

#FT8

Lack of logging happened to me also at last Thursday's monthly NRAU NAC (Nordic Activity Contest) with FT8 on 50 MHz, when the WSJT-X 2.4.0 RC4 refused to log the contacts in any way on my Windows-10

#FT8

Lack of logging happened to me also at last Thursday's monthly NRAU NAC (Nordic Activity Contest) with FT8 on 50 MHz, when the WSJT-X 2.4.0 RC4 refused to log the contacts in any way on my Windows-10

#FT8

Hi, You may get some answers to your questions, if you follow instructions in pinned mail "Setting Windows WSJT-X Tx audio levels (ALL VERSION 2 VERSIONS)", #13890. In short power slider changes audio

#GeneralGroupInfo #FT8