I was trans,otting on FST4W-1800 and spotted that one station DL0AO reported my first transmission that had started at 1900z when the clock was showing 192930z, several tens of seconds BEFORE the tran

#FST4W

I have been using wsprdaemon and wsjt-x to monitor FST4W-900 signals. The radio that is using wsjt-x reports that mode as mode WSPR-2 but it should be mode WSPR-15. Spots that are reported by wsprdaem

#FST4W

Will WSJTX support FST4W band hopping similar to WSPR band hopping? Thank you -stu wb6yrw

#FST4W

I tried FST4 last February. Total 19 qsos on 160, but activity dried up. "Jim Brown" <k9yc@...> wrote:

#WSPR #FST4W

Peter, The SAC PC-1000 autocoupler is the real prize in my 630 meter station. My transmitter is a SAC SS-250C with only 25 watts output and the EIRP is estimated somewhere between 20 dbm and 26 dbm, s

#FST4 #FST4W

Hi Bill, Magic! Thanks so much! Decodes now work on not only a single wav file, but also on a list of wav files which together contain the signal. Can I find a description of the meaning of the spot l

#FST4W

A write up of my PIC + DDS Beacon source for FST4 / FST4W http://g4jnt.com/FST4_Beacon_Source.pdf Andy G4JNT

#FST4W

I've been sending a FST4W-900 signal for the last hour or so and monitoring WSPRNET for reports Some stations report the mode correctly as '15'. Others as '2' Is this caused in WSJT-X, or is it someth

#FST4W

The PIC/DDS beacon source is now running, and it's being tested on air for the first time with FSTW-120, -300 and now -900 There's just have one issue to sort out. I generate the Gaussian glide by usi

#FST4W

Big OOPS all round. SRI for getting all confused over this. The reason my beacon source would work and WSJTX properly decode all FST4 messages, but wouldn't decode FST4W ones was for a very simple rea

#FST4W

Its more a case of I want to do it as a challenge. And it's FST4 / FST4W that inspired teh idea. On which subject, see my post earlier about the failure of FST4SIM to properly generate symbols that de

#FST4W

Hi all If you have been looking for a stand alone FST4W transmitter a RFzero with the FST4W beacon program may be the answer: https://www.rfzero.net/examples/beacons/fst4w/ All four FST4W sub-modes ar

#FST4W

For a permanent and distributed weak signal Beacon Project I am curious to know if scheduled/synchronized Band hopping is on the Dev Roadmap for FST4W modes ? 73 Roland

#FST4W

It looks like your software is set to decode wspr-2, not fst4w-120

#FST4W