|
#bugreport (more a suggestion?): stop auto scroll when scroll bar is not at bottom
#BugReport
Hello all of you, I am a new user of wsjt-x (first as an SWL [NL413] and in the near future as pe1atn). Last Saturday the PACCDigi contest was happening. It was my first contest. So used wsjt-x (v2.3.
Hello all of you, I am a new user of wsjt-x (first as an SWL [NL413] and in the near future as pe1atn). Last Saturday the PACCDigi contest was happening. It was my first contest. So used wsjt-x (v2.3.
|
By
Victor Reijs
·
|
|
IC-7300 sudden CAT issue 4 messages
#AudioIssues
#bluetooth
#BugReport
#Cat_RigControl
I've had that happen several times and I found that a "RESET" of the IC-7300 cleared up the problem. If you do a full factory reset, make sure you save all your settings on on an SD card before you st
I've had that happen several times and I found that a "RESET" of the IC-7300 cleared up the problem. If you do a full factory reset, make sure you save all your settings on on an SD card before you st
|
By
Charlie Hoffman
·
|
|
#bugreport ALL.TXT 9 messages
#BugReport
Dave sorry disagree If you ‘filter’ all.txt to get all MSK entries - to see what was sent etc - no date there. Your argument assumes there will be details ON THE SAME day before/after the MSK entries
Dave sorry disagree If you ‘filter’ all.txt to get all MSK entries - to see what was sent etc - no date there. Your argument assumes there will be details ON THE SAME day before/after the MSK entries
|
By
Tom Melvin
·
|
|
Fatal Error on High Sierra
#BugReport
I am now finding that I get a Fatal Error when trying to use WSJT-X Ver 2.3.1 on my Mac. Does anyone else use this and how did you get it fixed?
I am now finding that I get a Fatal Error when trying to use WSJT-X Ver 2.3.1 on my Mac. Does anyone else use this and how did you get it fixed?
|
By
Ian Wooller
·
|
|
Hamlib error - WSJTx v2.3.1 - RPi4 -FiFi SDR
#BugReport
#raspberryPi
#Cat_RigControl
First install on RPi4 B 2Go with PiSDR image With same settings and same udev file for FiFi SDR JTDX rc155 works fine. WSJTx throws error, see picture
First install on RPi4 B 2Go with PiSDR image With same settings and same udev file for FiFi SDR JTDX rc155 works fine. WSJTx throws error, see picture
|
By
Erwin - PE3ES - F4VTQ
·
|
|
Transmitting Tx 1 to same station after receiving Tx 5
#BugReport
I usually click on Enable Tx to CQ again, either before or right after clicking OK for a log entry. Sometimes the Tx 5 from the other station triggers my WSJT-X 2.3.1 on Win 10 to cycle back to Tx 1 a
I usually click on Enable Tx to CQ again, either before or right after clicking OK for a log entry. Sometimes the Tx 5 from the other station triggers my WSJT-X 2.3.1 on Win 10 to cycle back to Tx 1 a
|
By
Chuck - KY4CU
·
|
|
Losing rig control after upgrade to 2.3.1 2 messages
#FT8
#BugReport
#Cat_RigControl
I deleted 2.3.1 and re-installed 2.3.0 and am no longer having the rig control loss. 73, Bill NZ0T
I deleted 2.3.1 and re-installed 2.3.0 and am no longer having the rig control loss. 73, Bill NZ0T
|
By
Bill Carpenter
·
|
|
Sudden blindness to sound card and ports windows 10 13 messages
#AudioIssues
#Cat_RigControl
#BugReport
Update: after hours of work, I solved this. It turned out to be caused by a (very) badly behaving modem card! It actually permanently damaged the operating system, so just uninstalling and removing wa
Update: after hours of work, I solved this. It turned out to be caused by a (very) badly behaving modem card! It actually permanently damaged the operating system, so just uninstalling and removing wa
|
By
Chris
·
|
|
Dark Mode Anomaly - FT8>MSK144
#BugReport
v2.3.1 (GA) Dark Mode anomaly When STD messages are populated with a callsign (from Dx Call window) and you switch modes from FT8 to MSK144, the Tx5 field generated changes to light blue with white te
v2.3.1 (GA) Dark Mode anomaly When STD messages are populated with a callsign (from Dx Call window) and you switch modes from FT8 to MSK144, the Tx5 field generated changes to light blue with white te
|
By
Brad, N8GLS
·
|
|
Inconsistent colours on left hand pane of main window 3 messages
#BugReport
Hello Bill I might have done - a consequence of using a non-CAT rig with wsjt-x! Thanks for putting me straight. 73 Nick
Hello Bill I might have done - a consequence of using a non-CAT rig with wsjt-x! Thanks for putting me straight. 73 Nick
|
By
Nick
·
|
|
Numerous glitches with my upgrade to 2.3.1 7 messages
#FT8
#BugReport
Hello, Although I posted a new topic just before saw this..., maybe my issue is similar to this one. I am using an FTdx-10 and I have frequency shits of 55Hz and 700Hz when I use wsjt-x v2.3.0. I also
Hello, Although I posted a new topic just before saw this..., maybe my issue is similar to this one. I am using an FTdx-10 and I have frequency shits of 55Hz and 700Hz when I use wsjt-x v2.3.0. I also
|
By
Miguel Cachim
·
|
|
PSK Reporter spotting in Hound mode 2 messages
#FoxAndHound
#BugReport
I see the same thing and believe it has to do with the pskreporter site and how they handle a flood of spots. I also was watching C92RU spots on Hamspots.net and they showed many more spots than pskre
I see the same thing and believe it has to do with the pskreporter site and how they handle a flood of spots. I also was watching C92RU spots on Hamspots.net and they showed many more spots than pskre
|
By
Bob KM4RL
·
|
|
#BugReport #AudioIssues
#BugReport
#AudioIssues
After I installed 2.3.1, I noticed that when first opening WSJT-X or switching bands and initiating a call, I have no transmitter output. Within this first Tx cycle, if I immediately select "halt" and
After I installed 2.3.1, I noticed that when first opening WSJT-X or switching bands and initiating a call, I have no transmitter output. Within this first Tx cycle, if I immediately select "halt" and
|
By
W4ARK
·
|
|
Split Operation with Rig Mode
#BugReport
It appears that Split Operation using Rig mode is not functioning correctly in both versions 2.3.1 and 2.4.0-rc4. Running Split | Rig with my Yaesu FT-817 when switching to transmit the FT-817 switche
It appears that Split Operation using Rig mode is not functioning correctly in both versions 2.3.1 and 2.4.0-rc4. Running Split | Rig with my Yaesu FT-817 when switching to transmit the FT-817 switche
|
By
Mark Friedman
·
|
|
false decoding WSJT-X v.2.4.0-rc4 6 messages
#BugReport
Hi Reino, Hasan Thank you for the explanation. At first I thought that this problem is from my side. Previously, I did not experience false decoding. But still returned the normal decoding mode. In th
Hi Reino, Hasan Thank you for the explanation. At first I thought that this problem is from my side. Previously, I did not experience false decoding. But still returned the normal decoding mode. In th
|
By
Борис Романов
·
|
|
Strange behaviour with FTDX-3000 4 messages
#BugReport
Hello Bill and group, Last night downloaded and installed v2.4.0-rc4, the issue is solved, with RADIO set to FTDX3000 it works perfectly. Thank you very much!!! 73 de LU4AHR - Hector
Hello Bill and group, Last night downloaded and installed v2.4.0-rc4, the issue is solved, with RADIO set to FTDX3000 it works perfectly. Thank you very much!!! 73 de LU4AHR - Hector
|
By
LU4AHR
·
|
|
VS: VS: [WSJTX] false decoding WSJT-X v.2.4.0-rc4
#BugReport
Hi Boris, Short answer is no. A bit more practical answer is that is depends on many issues and usually a careful balancing is needed. I take just one issue that is a limiting factor. It is how many b
Hi Boris, Short answer is no. A bit more practical answer is that is depends on many issues and usually a careful balancing is needed. I take just one issue that is a limiting factor. It is how many b
|
By
Reino Talarmo
·
|
|
VS: [WSJTX] false decoding WSJT-X v.2.4.0-rc4 2 messages
#BugReport
Hi Reino, I got it. Is it possible to eliminate false decoding in the program or is it an inevitable effect of a deep level of decoding? 73 Boris UX8IW -- Борис Романов
Hi Reino, I got it. Is it possible to eliminate false decoding in the program or is it an inevitable effect of a deep level of decoding? 73 Boris UX8IW -- Борис Романов
|
By
Борис Романов
·
|
|
Raspi 2.4.0-rc4 another instance-fatal error #BugReport #linux buster
#BugReport
#linux
Sorry .. forgot the screenshot to enclose... Hi everybody, A problem with WSJTX 2.4.0-rc4 on my raspi with raspibian buster. I start wsjtx via autostart entry: @wsjtx the last entry in the autostart f
Sorry .. forgot the screenshot to enclose... Hi everybody, A problem with WSJTX 2.4.0-rc4 on my raspi with raspibian buster. I start wsjtx via autostart entry: @wsjtx the last entry in the autostart f
|
By
Carlos
·
|
|
Raspi 2.4.0-rc4 another instance-fatal error #BugReport #linux buster
#BugReport
#linux
Hi everybody, A problem with WSJTX 2.4.0-rc4 on my raspi with raspibian buster. I start wsjtx via autostart entry: @wsjtx the last entry in the autostart file Since-rc4 I have the following issue: whe
Hi everybody, A problem with WSJTX 2.4.0-rc4 on my raspi with raspibian buster. I start wsjtx via autostart entry: @wsjtx the last entry in the autostart file Since-rc4 I have the following issue: whe
|
By
Carlos
·
|