I've had that happen several times and I found that a "RESET" of the IC-7300 cleared up the problem. If you do a full factory reset, make sure you save all your settings on on an SD card before you st

#AudioIssues #bluetooth #BugReport #Cat_RigControl

Hi Mike, your symptoms are likely caused by a loss of CAT control due to issues with the virtual serial port. Given it happens while transmitting then RFI is extremely likely to be the root cause. Ver

#AudioIssues #bluetooth #BugReport #Cat_RigControl

Hello Mike! I don't have a permanent shack setup either so I run with a bunch of ferrites as well. Do you have another USB cable you can swap out? Have you tried running at 1 watt to see if the proble

#AudioIssues #bluetooth #BugReport #Cat_RigControl

I'm stumped and can't find anything about this issue after a lot of googling. I'm on Windows 10 on an ASUS laptop and my rig is an IC-7300. Suddenly, when I attempt to transmit (FT8) with my IC-7300,

#AudioIssues #bluetooth #BugReport #Cat_RigControl

Update: after hours of work, I solved this. It turned out to be caused by a (very) badly behaving modem card! It actually permanently damaged the operating system, so just uninstalling and removing wa

#AudioIssues #Cat_RigControl #BugReport

I'll check the cabling again. Maybe I'll just get new and stay over. Thanks for the reply.

#AudioIssues #Cat_RigControl #Waterfall #NewUser

Hi. I'm trying to take the IF output from my ICom 7300 [1], process it through GNU Radio to split and tune into three separate audio streams, and then point wsjtx, js8call, and another instance of wsj

#AudioIssues

Hi, Are you saying that you hear audio from rig’s speaker? At least then your audio connection to U5 and further to PC is not working. You need to get that working before there is no need to worry abo

#AudioIssues #Cat_RigControl #Waterfall #NewUser

I tried the set up recommended and I've checked my clock. I'm using Meinberg NTP. Clock is synced. The audio is still coming from the rig. Still no waterfall. Should I be able to codify/change the num

#AudioIssues #Cat_RigControl #Waterfall #NewUser

Check your computer clock. Windows time known to be an issue. You may need to install dimension 4 or Meinberg clock synchronizers 73, K7TRK

#AudioIssues #Cat_RigControl #Waterfall #NewUser

I don't know if your model is the same as mine, but here is a mod to enable it to provide a PTT output so you don't have to use VOX: http://www.bigskyspaces.com/w7gj/FT857ptt.htm GL and VY 73, Lance

#AudioIssues #Cat_RigControl #Waterfall #NewUser

Thanks Ron, I'll try those settings and see what happens. It's a step in the right direction.

#AudioIssues #Cat_RigControl #Waterfall #NewUser

Ron, why are you using VOX for the WSJT-X PTT Method? How do yo key your rig? 73 Bill G4WJS.

#AudioIssues #Cat_RigControl #Waterfall #NewUser

Hi...here are my setting for my 857 to the U5 interface box. It took me a LONG time messing with everything to get this to work..hope it helps.. Regards Ron WA8KQF. FT 857 Settings for FT8 Digital Gen

#AudioIssues #Cat_RigControl #Waterfall #NewUser

Thanks for the rapid response, Andy. The only thing that comes close to being able to set anything is the computer sound card. There isn't anything that can be selected from the interface. My audio is

#AudioIssues #Cat_RigControl #Waterfall #NewUser

What audio path are you specifying within WSJTX ? Usually "no waterfall" is related to the importance of setting WSJTX to the source of your radio's signals. Inder recommended procedures, you would no

#AudioIssues #Cat_RigControl #Waterfall #NewUser

It is very discouraging when even the samples that are offered in the instructions don't work. I finally got the software to recognize my FT 857D and vice versa. "Test CAT' and "Test PTT" both functio

#AudioIssues #Cat_RigControl #Waterfall #NewUser

There is no PTT from WSJTX with Signalink! Signalink is an audio card with built-in VOX. Use the "VOX" setting in WSJTX. 73, ... Joe, W4TV

#AudioIssues

Pete, the SignaLink USB is not a CAT interface, if you do not have a separate CAT interface between your rig and PC then you must select "Settings->Radio->None" in WSJT-X. Use the "Tune" button on the

#AudioIssues

#audioissues Running kenwood 140s With signal link usb hooked to back of radio Having issues getting wsjt-x running with my signal link. All settings set up and it works this way in fldigi I keep gett

#AudioIssues