Hi all, Each time I try to go to the Princeton site, it times out. Just as well the files are on Sourceforge...... 73 de Phil GU0SUP

#NewUser

Willie and the group, I am not convinced it does shorten the QSO time.... I have been using GU5WS as part of the Transatlantic Centenary Test this month, and I note that when I call CQ, the process go

#EnhancementReqest

Panos and the group, I disagree! I like to see a locator, mainly so that I can aim the beam in the right direction. For ezxample, if I see a W7 call me, there is a bog difference in azimuth between WA

#EnhancementReqest

Hi all, I am still using v2.5.4 here, and I have not experienced the issue mentioned here. However, I am not sure the version is relevant here. I have worked numerous DXpeditions in F/H mode over the

#FoxAndHound

Hi JP, Ah, OK, I obviously mis-read your sentiment.... 73 de Phil GU0SUP

#FoxAndHound

It does work, and as it happens, I was chasing 5V7RU today, and timed out just as they called me with a report, and WSJTx put itself into TX mode and I completed the QSO. Not the first time I have had

#FoxAndHound

For Alan G4ZFE, With D4 set to 15 minute updates/checks, and having no issues with regard to missing decodes, I checked time.is before and after the session, which lasted around 1 hr 45 mins, and at t

#AudioIssues

Hi all, Well, I changed the update period in D4 to 15min and after a long session on the radio this afternoon, I had only one missing period, but that may have been down to a very strong signal (bad a

#AudioIssues

Hi to Alan, Brian and Kari, That is very interesting! I changed the time update period earlier, and that did seem to make a difference. I think I went from 1 minute to 5 minutes, and noticed it didn't

#AudioIssues

Hi Kari, My PC time is good, as I use Dimension4 to keep it good, and this is updated every minute. Maybe that is too often? Maybe the sync is confusing things? 73 de Phil GU0SUP

#AudioIssues

Hi all, Over the last few days, I have noticed that WSJTx isn't decoding some time slots. This appears to be random. I am using an IC7800 via a microHam MKII to an AMD A8-9600 Radeon R7 with 16GB RAM

#AudioIssues

Hi all, Just another point of view from me... As a GU, I am often involved in a pile-up, and don't always have the time to respond to Messaging requests during that time. Wherever possible, I will con

#QSO_practices

Hi all, Anyone NOT using the waterfall should not be running FT8, as it will only cause QRM... Even on a busy band, you need to ensure you are not transmitting over someone else, or you simply risk no

#FT8

Hi Ellis, The simplest way is to uncheck the Call 1st box. You can then choose who to respond to. There is plenty of time to do this, and is what I use when I want to work DX, but get called by all an

#EnhancementReqest

Hi Chuck, Well, my clock is always within +/- 0.2s so well within tolerance. The missing decodes are random, as most of the time, I get good decodes. Whilst operating this afternoon, I was seeing some

#AudioIssues

Hi Tom and William, It isn't all the time, just periodically. I guess it could be RF getting back in, so I will try using less power, but I don't have issues with RTTY or PSK software, only WSJTx and

#AudioIssues

Hi to Kari and Chuck, The time is correct... I am using Dimension4 and keep an eye on it and check that the clock is good. The received audio thermometer is showing good levels, but I occasionally jus

#AudioIssues

Hi all, I have noticed that I am losing the incoming text text on numerous occasions. For example, I call CQ, but after hearing many signals, I get no decodes. I am using an IC7800, microHam MKII, and

#AudioIssues

Hi Mike, I cannot attach it as a file 73 de Phil GU0SUP Here is the log file: [2022-06-09 13:18:25.651767][00:00:00.001713][SYSLOG:info] Read logging configuration file: C:/Users/User/AppData/Local/WS

#Cat_RigControl

Good morning Mike, I have just downloaded the file again, and placed it in the BIN folder, and WSJTx will start now, but I am still having the issue of it changing the radio to USB as soon as I transm

#Cat_RigControl