FT8 quit making contacts. It decodes fine, but when I attempt to make a contact I get no answer. I got an email from some one that said my signal didn't sound right. I monitored my signal while attemp

#FT8

An update on the problem with FT8. I uninstalled the program and checked to make sure there wasn't any hidden files. Restarted the computer and reinstalled the program. Still have the same problem. PL

#FT8

Sorry. I'm running a IC-756 PRO 2. I have a RIG blaster Plus. As stated below everything was working correctly before this happened. I have not changed anything. FT4 works fine. I worked a few station

#FT8

Additional info; Radio settings. Rig: none, PTT: RTS: checked, Poll: Inter: 1s, Com Port:3. Audio Input: mono, Speakers: mono. I run about 35-40 watts. on FT8 and on FT4-30 watts. The system has been

#FT8

To: w8lvn The DB scale doesn't move even at 100 watts. On the radio I have the comp. set at 0 and the ALC just barely moves. I tried several contacts using 100 watts but still no answers. TNX, NC4MI -

#FT8

Hi Bruce: Thanks for the info. I already had most of the settings as you suggested. I did refine some of them, but no help. Yes I have decodes on all the freq's that I operate on. The thing that confu

#FT8

I checked the tone and the 2x was checked. I turned it off and then tried a FT4 contact and it worked fine. Then tried calling several stations on FT8. NO luck. I'm going to install WSJT-x on my lapto

#FT8

I found the problem. I installed WSJT-X on the laptop and everything worked fine, in that process I found that the USB cable that was plugged into the main computer was bad. I replaced it before I set

#FT8